SELECTING TREND TESTS FOR WATER QUALITY SERIES WITH SERIAL CORRELATION AND MISSING VALUES1

ABSTRACT: The use of nonparametric tests for monotonic trend has flourished in recent years to support routine water quality data analyses. The validity of an assumption of independent, identically distributed error terms is an important concern in selecting the appropriate nonparametric test, as is the presence of missing values. Decision rules are needed for choosing between alternative tests and for deciding whether and how to pre-process data before trend testing. Several data pre-processing procedures in conjunction with the Mann-Kendall tau and the Seasonal Kendall test (with and without serial correlation correction) are evaluated using synthetic time series with generated serial correlation and missing data. A composite test (pre-testing for serial correlation followed by one of two trend tests) is evaluated and was found to perform satisfactorily.     

The Spatiotemporal Pattern of Fires in Northern Taiga Larch Forests of Central Siberia

The periodicity of fires in larch forests of Evenkia and their relationship with landscape elements have been studied. Cross-sections with “burns” in them caused by past fires have been analyzed in 72 test plots; the fire chronology encompassed the period from the 15th to the 20th century. The between-fire intervals (BFIs) have been calculated by two methods: (I) on the basis of burns alone and (II) on the basis of burns and the start of growth of the new generation of larch after the earliest fire. The BFI depends on local orographic features; it is 86 ± 11 (105 ± 12), 61 ± 8 (73 ± 8), 139 ± 17 (138 ± 18), and 68 ± 14 (70 ± 13) years for northeastern slopes, southwestern slopes, bogs, and flatlands, respectively. The mean BFIs calculated by methods I and II are 82 ± 7 and 95 ± 7 years, respectively. The permafrost horizon rises at a mean rate of 0.3 cm per year after a forest fire. It has been shown that the number of fires regularly peaks at periods of 36 and 82 years. There is also a temporal trend in fire frequency: the mean BFI was approximately 100 years in the 19th century and 65 years in the 20th century.     

Enhanced sludge solubilization by microbubble ozonation

A microbubble ozonation process for enhancing sludge solubilization was proposed and its performance was evaluated in comparison to a conventional ozone bubble contactor. Microbubbles are defined as bubbles with diameters less than several tens of micrometers. Previous studies have demonstrated that microbubbles could accelerate the formation of hydroxyl radicals and hence improve the ozonation of dyestuff wastewater. The results of this study showed that microbubble ozonation was effective in increasing ozone utilization and improving sludge solubilization. For a contact time of 80 min, an ozone utilization efficiency of more than 99% was obtained using the microbubble system, while it gradually decreased from 94% to 72% for the bubble contactor. The rate of microbial inactivation was obviously faster in the microbubble system. At an ozone dose of 0.02 g O₃ g⁻¹ TSS, about 80% of microorganisms were inactivated in the microbubble system, compared with about 50% inactivation for the bubble contactor. Compared to the bubble contactor, more than two times of COD and total nitrogen, and eight times of total phosphorus content were released from the sludge into the supernatant by using the microbubble system at the same ozone dosage. The application of microbubble technology in ozonation processes may provide an effective and low cost approach for sludge reduction.     

Sensitivity analysis of a parameterization of the stomatal component of the DO3SE model for Quercus ilex to estimate ozone fluxes

A sensitivity analysis of a proposed parameterization of the stomatal conductance (g(s)) module of the European ozone deposition model (DO(3)SE) for Quercus ilex was performed. The performance of the model was tested against measured g(s) in the field at three sites in Spain. The best fit of the model was found for those sites, or during those periods, facing no or mild stress conditions, but a worse performance was found under severe drought or temperature stress, mostly occurring at continental sites. The best performance was obtained when both f(phen) and f(SWP) were included. A local parameterization accounting for the lower temperatures recorded in winter and the higher water shortage at the continental sites resulted in a better performance of the model. The overall results indicate that two different parameterizations of the model are needed, one for marine-influenced sites and another one for continental sites.     

由粉煤灰合成单一的沸石及其对Cr(Ⅵ)的吸附研究

以粉煤厌为原料采用两步法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构和性能进行了详细表征.2种沸石产物的吸附性能比较结果表明,NaA型沸石优于NaX型沸石.在静态吸附条件下,研究了NaA型沸石吸附水溶液中Cr(Ⅵ)的相关参数(溶液pH值、吸附温度和吸附时间),并用Langmuir和Freundlich等温吸附线对吸附结果进行拟和.结果表明:Cr(Ⅵ)的吸附行为符合Langmuir方程;饱和吸附量为47.78 mg/g.NaA型沸石对Cr(Ⅵ)的吸附是物理和化学吸附两种行为共同作用的结果.