安徽省TJ-Ⅱ型钻孔体应变同震效应分析

描述了安徽省地震局"十一五"期间安装的5套钻孔体应变仪的地质构造特点与钻孔岩芯物理特性,介绍了TJ-Ⅱ体应变仪的运行情况。通过对两次强震活动的同震效应分析,初步探讨了地理、地质构造条件不同的情况下,各观测井对记录应力活动能力强弱的反映。     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.     

Removal of copper ions from aqueous solution by calcium alginate immobilized kaolin

Kaolin has been widely used as an adsorbent to remove heavy metal ions from aqueous solutions. However, the lower heavy metal adsorption capacity of kaolin limits its practical application. A novel environmental friendly material, calcium alginate immobilized kaolin (kaolin/CA), was prepared using a sol-gel method. The e ects of contact time, pH, adsorbent dose, and temperature on Cu2+ adsorption by kaolin/CA were investigated. The Langmuir isotherm was used to describe the experimental adsorption, the maximum Cu2+ adsorption capacity of the kaolin/CA reached up to 53.63 mg/g. The thermodynamic studies showed that the adsorption reaction was a spontaneous and endothermic process.     

氧化亚铜类Fenton氧化降解染料活性艳蓝KN-R的研究

氧化亚铜(Cu2O)与H2O2组成的类Fenton体系能很好的氧化降解印染废水中的有机物.实验用Cu2O类Fenton氧化降解染料活性艳蓝KN-R,研究表明,Cu2O类Fenton能很好的氧化降解染料活性艳蓝KN-R.在KN-R的溶液初始pH值为2,水浴温度为50℃的条件下,用0.429 g Cu2O(0.3 mmol)和0.1 mL、质量分数为30%的H2O2处理50 mL、质量浓度为100mg/L的KN-R溶液1 h,其脱色率为95.09%,TOC去除率为56.38%.     

乌梁素海湿地鸟类栖息地生态服务功能评估探讨

本文通过收集近30年鸟类种类及种群数据变化的资料,分析乌粱素海不同鸟类栖息环境的栖息地服务功能,从而评估鸟梁素海湿地鸟类栖息地的综合生态服务功能。评估结果表明：乌梁素海湿地鸟类栖息地综合生态服务功能为不好。     

Financing for innovative technologies and best practices to reduce persistent organic pollutants

Persistent Organic Pollutants (POPs) threaten human health and the global environment. Recognizing their dangers many countries began to limit or ban POPs production, use, and release in the 1990s. Eventually the Stockholm Convention on POPs, was adopted in 2001 and entered into force in 2004. The Global Environment Facility (GEF) provides financial support to developing country Parties for the implementation of the Stockholm Convention. The GEF’s POPs investment portfolio focuses on: 1) strengthening the capacity of developing country Parties to implement the Stockholm Convention; 2) establishing and supporting partnerships to develop and implement National Implementation Plans (NIPs), and 3) demonstrating and deploying best technologies and practices to reduce POPs emission, including development of safe alternatives. Since 2001 the GEF has committed US$568.8 million to POPs projects and leveraged some US$1474.5 million in co-financing from partners in the public and private sectors, bringing the total value of the GEF POPs portfolio to over US$2 billion. With GEF support, 108 developing country Parties have developed their NIPs. The GEF also financed 109 projects for the implementation of the Convention. Upon completion, these GEF POPs investments will contribute to the disposal of more than 70,000 tons of Polychlorinated Biphenyls (PCBs) oil, contaminated equipments, and waste, more than 40,000 tons of obsolete POPs pesticides and associated waste, and reducing dioxin/furan and mercury emission by introducing environmentally sound technologies and best practices. This paper summarizes: 1) direct and indirect GEF investments to support the goals of the Stockholm Convention; 2) investment case studies on PCB, DichloroDiphenylTrichloroethane (DDT), chlordane and mirex, medical waste, obsolete POPs and engaging civil society; and 3) lessons learned in terms of GEF financing strategies, best technologies and environmental practices to address POPs.     

热脱附-气相色谱法测定空气中的总挥发性有机化合物研究

建立了热脱附-毛细管气相色谱法测定空气中苯、甲苯、乙酸丁酯、乙苯、对/间二甲苯、邻二甲苯、苯乙烯和十一烷等挥发性有机物的检测方法。九种挥发性有机物在一定浓度范围内标准曲线线性良好,相关系数均在0.997~0.999之间。检出限在0.002~0.005 mg/m3(采样体积1.0 L计)。用该方法检测了企业产生的有机废气及厂区周边环境空气,实验结果表明该方法灵敏度高、操作简单、重现性好、准确可靠,能够满足对实际样品的分析要求。     

生态环境变化遥感评价指数的应用研究——以敖江流域为例

利用1994年5月12日与2009年6月6日的Landsat TM和2001年5月23日的Landsat ETM＋卫星影像,选用遥感生态指数（RSEI）,结合流域的植被覆盖度状况,定量评价了15年间敖江流域的生态环境变化与植被覆盖度变化情况,并对二者的关系进行了简要分析.结果表明：15年间,敖江流域生态等级为优所占的面积比例从13.48％上升到24.90％,增加了304.29 km2;植被覆盖度等级为极高的面积增加比例为29.31％.总体看来,敖江流域生态环境状况和植被覆盖状况均有明显的提高,两者具有较好的对应关系.     

南昌市移动源排放清单研究

根据收集的南昌市移动源活动水平数据,采用合适的估算方法、排放因子和GIS技术,建立了南昌市2007—2014年移动源排放清单,并对2014年移动源清单进行了空间化处理与分析,空间分辨率为1 km×1 km.结果表明,2007—2014年南昌市移动源共向大气排放CO、HC、NO_x、PM_(2.5)、PM_(10)、SO_2分别为18.26×10~4、5.07×10~4、18.46×10~4、0.99×10~4、1.08×10~4、3.31×10~4t.其中,2014年移动源向大气中排放的这6种污染物总量分别为2.14×10~4、0.76×10~4、1.97×10~4、0.08×10~4、0.09×10~4、0.55×10~4t.道路移动源中,汽油小型客车是CO、HC和SO_2最大的贡献源,排放量分别占机动车排放总量的55.1%、78.5%和56.1%;柴油重型货车是NO_x、PM_(2.5)和PM_(10)排放贡献率最大的车型,分别占43.2%、40%和40%.非道路移动源中,小型拖拉机对CO、HC、NO_x、PM_(2.5)和PM_(10)的贡献率均较大,分别占非道路移动源排放总量的29.9%、26.9%、23.4%、29.5%和29.8%;SO_2排放主要来源于船舶,占非道路移动源SO_2排放总量的45.1%.高污染排放集中的区域,主要是青山湖区、西湖区和东湖区.     

城市家用天然气安全管理的研究

通过对100家广州市天然气家庭用户使用情况进行调查,主要针对天然气使用、燃气设施保护和安全意识等诸多问题,运用事故致因理论,分析其成因规律,提出从事故发生的根本原因入手,运用"预防为主、善后为辅"的积极、主动的方法,把事故消除在起始或孕育阶段。调查结果显示:造成城市燃气应用系统事故的原因主要包括:用户燃具不正确的选择、燃气设备安装不当、燃气安全知识水平不高、安全意识不强、燃具产品和服务质量良莠不齐等。并以事故预防控制理论为指导,提出广州市天然气应用预防与安全管理应采取的技术、教育、强化等3方面对策。