An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Optimization of esterification of fatty acid rubber seed oil for methyl ester synthesis in a plug flow reactor

To date, non-food vegetable oil has been considered as the primary source for biodiesel production. Rubber seed oil has high acid value (34 mgKOH/g) and can be used for biodiesel synthesis. The purpose of this study was to investigate esterification of fatty acid, which derived from rubber seed oil, in a plug flow reactor system at high temperature and low methanol consumption. Response surface methodology was applied for design experiment and optimization of esterification reaction. Temperature, methanol consumption, and sulfuric acid were chosen as variables to examine their influence in a conversion to methyl ester. At 140°C, at 5:1 methanol to fatty acid ratio (by mole), H₂SO₄ 1.5 (%v/w), and space time 20 min, the conversion to methyl ester attained 98.2%. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-Mass spectrometry (GC-MS) were used for analysis and to confirm the formation of methyl ester. Methyl ester was characterized for biodiesel fuel properties in accordance to ASTM standard.     

Integrating affective values to sustainable behaviour focused on Kansei engineering

Due to the changes and complications of emerging society, designers are required not only to know about their design values, but also understand the link between their design and the impacts on the users. This paper aims to show a Kansei focused proposition for sustainable behaviour. By investigating the relationship between Subjective Preference (Like-Dislike) and product evaluation, it shows how affective values, which are used in Kansei engineering researches, influence user’s preferences. In this study, it was considering (1) various factors of product (e.g. the view variation and blackness of products), and (2) Reality Sets (Uninominal–Binominal). Car-front-face, car-side, car-multi-aspect (as Uninominal Reality Sets) and combinations of car front and side (as Binominal Reality Sets) were used as stimuli. The experiment consists of item screening and product evaluation. Subjects were participated in both. The aim of item screening was at selecting subjectively preferred/non-preferred images. Images, which were screened through item screening, were reconciliated per subject. The aim of product evaluation was at investigating if Subjective Preference has related to product evaluation. Semantic Differential method was used as product evaluation method. Evaluation values were preference, aesthetic and pleasure. The findings shows: (1) Subjective Preference is related to product evaluation independently in Uninominal Reality Sets, whereas Subjective Preference is related to product evaluation dependently in Binominal Reality Sets (2) partial preferred images influence product evaluation in Uninominal Reality Sets, whereas Binominal Reality Sets do not influence it.     

Sorption of acidic organic solute onto kaolinitic soils from methanol-water mixtures

The fate of the acidic organic solute from the soil-water-solvent system is not well-understood. In this study, the effect of the acidic functional group of organic solute in the sorption from cosolvent system was evaluated. The sorption of naphthalene (NAP) and 1-naphthoic acid (1-NAPA) by three kaolinitic soils and two model sorbents (kaolinite and humic acid) were measured as functions of the methanol volume fractions (f _c ≤ 0.4) and ionic compositions (CaCl₂ and KCl). The solubility of 1-NAPA was also measured in various ionic compositions. The sorption data were interpreted using the cosolvency-induced sorption model. The K _m values (= the linear sorption coefficient) of NAP with kaolinitic soil for both ionic compositions was log linearly decreased with f _c. However, the K _m values of 1-NAPA with both ionic compositions remained relatively constant over the f _c range. For the model sorbent, the K _m values of 1-NAPA with kaolinite for the KCl system and with humic acid for both ionic compositions decreased with f _c, while the sorption of 1-NAPA with kaolinite for the CaCl₂ system was increased with f _c. From the solubility data of 1-NAPA with f _c, no significant difference was observed with the different ionic compositions, indicating an insignificant change in the aqueous activity of the liquid phase. In conclusion, the enhanced 1-NAPA sorption, greater than that predicted from the cosolvency-induced model, was due to an untraceable interaction between the carboxylate and hydrophilic soil domain in the methanol-water system. Therefore, in order to accurately predict the environmental fate of acidic pesticides and organic solutes, an effort to quantitatively incorporate the enhanced hydrophilic sorption into the current cosolvency-induced sorption model is required.     

Impact of pH buffer capacity of sediment on dechlorination of atrazine using zero valent iron

This research investigated the role of the pH buffer capacity of sediment on the dechlorination of atrazine using zero valent iron (ZVI). The buffer capacity of the sediment was quantified by batch experiments and estimated to be 5.0 cmol OH^? · pH^?1. The sediments were spiked with atrazine at 7.25-36.23 mg kg^?1 (6.21 × 10^?7–3.09 × 10^?6 mol atrazine · g^?1 sediment) for the batch experiments. The buffer capacity of the sediment maintained the sediment suspension at neutral pH, thereby enabling continuous dechlorination until the buffer capacity of the sediment was depleted. The pseudo-first order dechlorination constants were estimated to be in the range of 1.19 × 10^?2?7.04 × 10^?2 d^?1 for the atrazine-spiked sediments.     

Assessment of phytotoxicity of ZnO NPs on a medicinal plant, Fagopyrum esculentum

Fagopyrum esculentum commonly named as buckwheat plant is pseudocereal food crops and healthy herbs but is not known as a bioindicator of environmental condition. In the present study, the effects of ZnO nanoparticles (NPs) and microparticles (MPs) on plant growth, bioaccumulation, and antioxidative enzyme activity in buckwheat were estimated under hydroponic culture. The significant biomass reduction at concentrations of 10–2,000 mg/L was 7.7–26.4 % for the ZnO NP and 11.4–23.5 % for the ZnO MP treatment, (p?<?0.05). ZnO NPs were observed in root cells and root cell surface by scanning electron microscopy and transmission electron microscopy analysis. Zn bioaccumulation in plant increased with increasing treatment concentrations. The upward translocation (translocation factor <0.2) of Zn in plant was higher with the ZnO NP treatment than that with the ZnO MP treatment. Additionally, reactive oxygen species generation by ZnO NPs was estimated as the reduced glutathione level and catalase activity, which would be a predictive biomarker of nanotoxicity. The results are the first study to evaluate the phytotoxicity of ZnO NPs to medicinal plant. F. esculentum can be as a good indicator of plant species in NP-polluted environment.     

Preparation and Use of Spatially and Temporally Resolved Emission Inventories in the San Francisco Bay Region

Three regional agencies recently prepared an Air Quality Maintenance Plan for the San Francisco Bay Area oxidant problem. An Eulerian, photochemical model, LIRAQ, provided the technical basis for the plan recommendations. A major LIRAQ input is an emission inventory accurately resolved to one kilometer and one hour increments. The cooperating agencies prepared such inventories, covering 20,000 sq km, for one base and two future years. Several manual and computer-assisted techniques were developed to utilize a variety of independent data bases. Population, land use, employment and transportation data were oganized into a common system of coordinates and units to produce the needed spatial input. Estimates of hourly variation were made by source category based on production rates, fuel use, traffic patterns, flight schedules, and other factors. The result was a series of consistent, detailed inventories which provide a powerful air quality modeling and planning tool. The detail is attained at considerable expense, but the cost is easily justifiable when compared to implementation costs for control strategies.     

Fine Particle Removal Performance of a Two-Stage Wet Electrostatic Precipitator Using a Nonmetallic Pre-Charger

ABSTRACT

A novel two-stage wet electrostatic precipitator (ESP) has been developed using a carbon brush pre-charger and collection plates with a thin water film. The electrical and particle collection performance was evaluated for submicrometer particles smaller than 0.01～0.5 μm in diameter by varying the voltages applied to the pre-charger and collection plates as well as the polarity of the voltage. The collection efficiency was compared with that calculated by the theoretical models. The long-term performances of the ESP with and without water films were also compared in tests using Japanese Industrial Standards dust. The experimental results show that the carbon brush pre-charger of the two-stage wet ESP had approximately 10% particle capture, while producing ozone concentrations of less than 30 ppb. The produced amounts of ozone are significantly lower than the current limits set by international agencies. The ESP also achieved a high collection rate performance, averaging 90% for ultrafine particles, as based on the particle number concentration at an average velocity of 1 m/sec corresponding to a residence time of 0.17 sec. Higher particle collection efficiency for the ESP can be achieved by increasing the voltages applied to the pre-charger and the collection plates. The decreased collection efficiency that occurred during dust loading without water films was completely avoided by forming a thin water film on the collection plates at a water flow rate of 6.5 L/min/m2 Zukeran, A., Ikeda, Y., Ehara, Y., Matsuyama, M., Ito, T., Takahashi, T., Kawakami, H. and Takamatsu, T. 1999. Two-Stage-Type Electrostatic Precipitator Re-entrainment Phenomena under Diesel Flue Gases. IEEE. Trans. Ind. Appl, 35: 346–351. [Crossref], [Web of Science ®] , [Google Scholar].

IMPLICATIONS Current two-stage electrostatic precipitators (ESPs) have several technical problems such as a drop in collection efficiencies by small-particle re-entrainment during rapping and corrosion of metallic electrodes of the ESPs by corrosive gases. This paper evaluates a novel two-stage ESP that uses a nonmetallic pre-charger and water film collection plates to avoid the above mentioned problems of other ESPs. This ESP can be used not only for industrial applications but also for residential purposes because it has a high removal performance for fine particles with low ozone generation and maintains its efficiency due to the continuous cleaning of the collection plates with water film.     

Threshold Dependence of Mortality Effects for Fine and Coarse Particles in Phoenix,Arizona

ABSTRACT

Daily data for fine (<2.5 um) and coarse (2.5-10 um) particles are available for 1995-1997 from the U.S. Environmental Protection Agency (EPA) research monitor in Phoenix, AZ. Mortality effects on the 65 and over population were studied for both the city of Phoenix and for a region of about 50 mi around Phoenix. Coarse particles in Phoenix are believed to be natural in origin and spatially homogeneous, whereas fine particles are primarily vehicular in origin and concentrated in the city itself. For this reason, it is natural to focus on city mortality data when considering fine particles, and on region mortality data when considering coarse particles, and most of the results reported here correspond to those assignments.

After allowing for seasonality and long-term trend through a nonlinear (B-spline) trend curve, and also for meteorological effects based on temperature and specific humidity, a regression of mortality was performed on PM using several different measures for PM. Based on a linear PM effect, we found a statistically significant coefficient for coarse particles, but not for fine particles, contrary to what is widely believed about the effects of coarse and fine particles. An analysis of nonlinear pollution-mortality relationships, however, suggests that the true picture is more complicated than that. For coarse particles, the evidence for any nonlinear or threshold-based effect is slight. For fine particles, we found evidence of a threshold, most likely with values in the range of 20-25 ug/m³. We also found some evidence of interactions of the PM effects with season and year.

The main effect here is an apparent seasonal interaction in the coarse PM effect. An attempt was made to explain this in terms of seasonal variation in the chemical composition of PM, but this led to another counterintuitive result: the PM effect is highest in spring and summer, when the anthropogenic concentration of coarse PM is lowest as determined by a principal components analysis. There was no evidence of confounding between the fine and coarse PM effects. Although these results are based on one city and should be considered tentative until replicated in other studies, they suggest that the prevailing focus on fine rather than coarse particles may be an oversimplification. The study also shows that consideration of nonlinear effects can lead to real changes of interpretation and raises the possibility of seasonal effects associated with the chemical composition of PM.     

Characterization of PM25 and PM10 in the South Coast Air Basin of Southern California: Part 1—Spatial Variations

ABSTRACT

In December 1994, the South Coast Air Quality Management District (SCAQMD) initiated a comprehensive program, the PM₁₀ Technical Enhancement Program (PTEP), to characterize fine PM in the South Coast Air Basin (SCAB). A 1-year special particulate monitoring project was conducted from January 1995 to February 1996 as part of the PTEP. Under this enhanced monitoring, HNO₃, NH₃, and speciated PM₁₀ and PM_2.5 concentrations were measured at five stations (Anaheim, downtown Los Angeles, Diamond Bar, Fontana, and Rubidoux) in the SCAB and at one background station at San Nicolas Island. PM_2.5 and PM₁₀ mass and 43 individual species were analyzed for a full chemical speciation of the particle data. The PTEP data indicate that the most abundant chemical components of PM₁₀ and PM₂₅ in the SCAB are NH₄+ (8-9% of PM₁₀ and 14-17% of PM₂₅), NO₃ ^- (23-26% of PM₁₀ and 28-41% of PM₂₅), SO₄= (6-11% of PM₁₀ and 9-18% of PM_{2 5}), organic carbon (OC) (15-19% of PM₁₀ and 18-26% of PM_2.5), and elemental carbon (EC) (5-8% of PM₁₀ and 8-13% of PM₂₅). On an annual average basis, PM₂₅ comprises 52-59% of the SCAB PM₁₀. Annual average PM₁₀ and PM_2.5 concentrations showed strong spatial variations, low at coastal sites and high at inland sites. Annual average PM₁₀ concentrations varied from 40.8 ug/m³ at Anaheim to 76.8 ug/m³ at Rubidoux, while annual average PM_2.5 concentrations varied from 21.7 ug/m³ at Anaheim to 39.8 ug/m³ at Rubidoux. The chemical characterizations of the PM_2.5 and PM₁₀ concentrations, as well as their spatial variations, were examined; the important findings are summarized in this paper, and the temporal variations are discussed in the companion paper.¹