河流污染原因分析及管理对策

河流污染主要是指污染物直接或间接地通过地表径流或其他方式进入河流而引起河流自净能力和环境功能下降的现象,主要表现为水体黑臭和富营养化。目前,随着城镇化、工业化进程的加快,人口的急剧增长,导致我国河流污染日益严重。河流污染程度与净流量、产业结构及人口规模密切相关。坚持走可持续发展道路,转变先污染后治理的传统观点,积极落实总量控制制度,彻底解决水环境污染问题。     

Chemical composition, mass closure and sources of atmospheric PM10 from industrial sites in Shenzhen, China

Concentrations of atmospheric PM10 and chemical components (including twenty-one elements, nine ions, organic carbon (OC) and elemental carbon (EC)) were measured at five sites in a heavily industrial region of Shenzhen, China in 2005. Results showed that PM10 concentrations exhibited the highest values at 264 μg/m3 at the site near a harbor with the influence of harbor activities. Sulfur exhibited the highest concentrations (from 2419 to 3995 ng/m3) of all the studied elements, which may be related to the influence of coal used as fuel in this area for industrial plants. This was verified by the high mass percentages of SO42-, which accounted for 34.3%-39.7% of the total ions. NO3-/SO42- ratios varied from 0.64-0.71, which implies coal combustion was predominant compared with vehicle emission. The anion/cation ratios range was close to 0.95, indicating anion deficiency in this region. The harbor site showed the highest OC and EC concentrations, with the influence of emission from vessels. Secondary organic carbon accounted for about 22.6%-38.7% of OC, with the highest percentage occurring at the site adjacent to a coal-fired power plant and wood plant. The mass closure model performed well in this heavily industrial region, with significant correlation obtained between chemically determined and gravimetrically measured PM10 mass. The main constituents of PM10 were found to be organic materials (30.9%-69.5%), followed by secondary inorganic aerosol (7.9%-25.0%), crustal materials (6.7%-13.8%), elemental carbon (3.5%-10.8%), sea salt (2.4%-6.2%) and trace elements (2.0%-4.9%) in this heavily industrialized region. Principal component analysis indicated that the main sources for particulate matter in this industrial region were crustal materials and coal/wood combustion, oil combustion, secondary aerosols, industrial processes and vehicle emission.     

Effect of two biogas residues’ application on copper and zinc fractionation and release in different soils

Biogas residue (BR) is widely used as a new green fertilizer in agriculture in China. However, it often contains a high concentration of heavy metals so its application should cause our concern. An incubation experiment was conducted to study the risk of pig biogas residue (PBR) and chicken biogas residue (CBR) application on Liuminying soil (LS) and Yixing soil (YS). The soils were incubated for one, three and six months with 0, 2%, 4% and 6% addition of BRs. According to BCR extraction results, the PBR and CBR applications induced an increase in the concentration of exchangeable fraction of Zn. As for the concentration of exchangeable fraction of Cu, an increase was only observed in the treatments with PBR application. The heavy metal binding intensity also showed a similar trend. With the PBR application, for the LS and YS, the highest concentrations of exchangeable Zn increased 3.6 and 9.5 times, respectively, while the exchangeable Cu was increased by 52.6% and 187.1%. Dissolved organic carbon was the limiting factor for the exchangeable Cu while the exchangeable Zn was controlled by soil pH. PBR presented more agricultural risk than CBR when used as fertilizer. Meanwhile, BRs were more adaptable to LS than YS according to the heavy metal release results.     

Numerical study of regional environmental carrying capacity for livestock and poultry farming based on planting-breeding balance

In consideration of the need to maintain planting-breeding balance, this article examines the capacity of the soil in Putian City, Fujian Province to absorb livestock and poultry excreta, and computes the environmental carrying capacity for livestock and poultry farming (ECCLPF) in each district of the city in terms of the fertility characteristics of the soil in the city, as well as its mix of crops cultivated and farming methods. On the basis of the computations, this work proceeds to classify the alarm grades of the city’s environmental carrying capacity for livestock and poultry framing, and assess the environmental impact of the livestock and poultry farming industry. The results of our study indicate that, the city’s ECCLPF ranges from 8.27 to 23.23 heads per ha when computed on the basis of nitrogen, and from 5.79 to 24.53 heads per ha when computed on the basis of phosphorus. A comparison between our research findings and the existing farming scale in Putian reveals that, in certain parts of the city, ECCLPF is overburdened to varying degrees. Specifically, Chengxiang District is severely overburdened, Hanjiang District and Meizhou Island have a level of overburdening between virtual overburdening and significant overburdening, Licheng District is virtually overburdened, and Xiuyu, Xianyou, and Bei’an Districts have not exceeded their environmental carrying capacity and therefore have varying levels of potential for growth.     

Effects of atamp-charging coke making on strength and high temperature thermal properties of coke

The stamp-charging coke making process has some advantages of improving the operation environment, decreasing fugitive emission, higher gas collection efficiency as well as less environmental pollution. This article describes the different structure strength and high temperature thermal properties of 4 different types of coke manufactured using a conventional coking process and the stamp-charging coke making process. The 4 kinds of cokes were prepared from the mixture of five feed coals blended by the petrography blending method. The results showed that the structure strength indices of coke prepared using the stamp-charging coke method increase sharply. In contrast with conventional coking process, the stamp-charging process improved the coke strength after reaction but had little impact on the coke reactivity index.     

Removement of thiocyanate from industrial wastewater by microwave-Fenton oxidation method

The microwave radiation oxidation process, Fenton as catalytic agent, was used to remove the thiocyanate from the industrial wastewater. The effects of microwave power, radiation time, pH and the feeding in ways of catalyst on the degradation rate of synthetic wastewater were investigated using the microwave radiation oxidation process by orthogonal experiment. The results show Fenton catalyst ratio was 1:20, the microwave radiation power was 900 W, the microwave radiation time was 7 min and the value of pH was 3. Under the optimum conditions, the removal of KSCN can reach over 90%. The apparent kinetics of removal was studied, which conformed to kinetics first-class reaction. In short, for the thiocyanate from the industrial wastewater, microwave-Fenton oxidation method is feasible and effective.     

A preliminary study on pollution characteristics of surfactant substances in fine particles in the Beibu Gulf Region of China

The pollution characteristics of surfactant substances in fine particles (PM_2.5) in spring were studied in the Beibu Gulf Region of China, 68 samples of PM_2.5 were collected at Weizhou Island in Beihai City from March 12 to April 17, 2015. The Anionic Surfactant Substances (ASS) and Cationic Surfactant Substances (CSS) in the samples were analyzed using Byethyl Violet Spectrophotometry and Disulfide Blue Spectrophotometry, respectively. Combined with the data from backward trajectory simulation, the effects of air pollutants from remote transport on the pollution characteristics of surfactant substances in PM_2.5 in the Beibu Gulf Region were analyzed and discussed. The results showed that the daily mean concentrations of ASS and CSS in spring in the Beibu Gulf Region were 165.20 pmol/m³ and 8.05pmol/m³, and the variation ranges were 23.21–452.55 pmol/m³ and 0.65–31.31 pmol/m³, accounting for 1.82‰ ± 1.65‰ and 0.12‰ ± 0.11‰ of the mass concentration of PM_2.5, respectively. These concentrations were lower than those in comparable regions around the world. There was no clear correlation between the concentrations of ASS and CSS in PM_2.5 and the mass concentrations of PM_2.5. Tourism and air transport had a positive contribution on the concentrations of ASS. The concentration of surfactant substances in PM_2.5 was significantly impacted by wind speed and wind direction. Atmospheric temperature, air pressure and precipitation had little effect on the concentrations of surfactant substances. Surfactant substances in PM_2.5 significantly impacted visibility. Results also showed that the main sources of surfactant substances were from the southern China and Southeast Asia.     

Stability of Fe–As composites formed with As(V) and aged ferrihydrite

During the aging process, ferrihydrite was transformed into mineral mixtures composed of different proportions of ferrihydrite, goethite, lepidocrocite and hematite. Such a transformation may affect the fixed ability of arsenic. In this study, the stability of Fe-As composites formed with As(V) and the minerals aged for 0, 1, 4, 10 and 30 days of ferrihydrite were systematically examined, and the effects of molar of ratios Fe/As were also clarified using kinetic methods combined with multiple spectroscopic techniques. The results indicated that As(V) was rapidly adsorbed on minerals during the initial polymerization process, which delayed both the ferrihydrite conversion and the hematite formation. When the Fe/As molar ratio was 1.875 and 5.66, the As(V) adsorbed by ferrihydrite began to release after 6 hr and 12 hr, respectively. The corresponding release amounts of As(V) were 0.55 g/L and 0.07 g/L, and the adsorption rates were 92.43% and 97.50% at 60 days, respectively. However, the As(V) adsorbed by the transformation products aged for 30 days of ferrihydrite began to release after adsorbed 30 days. The corresponding release amounts of As(V) were 0.25 g/L and 0.03 g/L, and the adsorption rates were 84.23% and 92.18% after adsorbed 60 days, for the Fe/As=1.875 and 5.66, respectively. Overall, the combination of As(V) with ferrihydrite and aged products transformed from a thermodynamically metastable phase to a dynamically stable state within a certain duration. Moreover, the aging process of ferrihydrite reduced the sorption ability of arsenate by iron (hydr)oxide but enhanced the stability of the Fe-As composites.     

Pressure effect on soot formation in turbulent diffusion flames

Soot formation in a methane air turbulent jet diffusion flame is investigated numerically using a semi-empirical model. The temperature, density and species (the soot precursor C2H2) fields are calculated using detailed chemical kinetic mechanism based on the flamelet library approach. The influence of pressure on the soot formation and the behavior of the semi-empirical model in different flame situations are investigated. It is found that the flame shape and the flame temperature can be well predicted by the flamelet library approach. The calculated soot yield is mostly sensitive to the soot surface growth rate and the increase of pressure. The increase of pressure leads to the increase of soot surface growth rate and therefore to the increase of soot volume fraction. By adjusting a model constant in the soot surface growth rate, the soot emissions in both pressure p = 1 atm and p = 3 atm are properly simulated by the current semi-empirical soot model.     

表面包覆聚合氯化铝吸附材料的制备与性能表征

在颗粒状黏土素瓷载体上 ,经灼烧制备具有共价结合的铝胶薄膜 ,并以此为载体 ,在聚合氯化铝形成过程中与氯化铝悬浊液共熟化 ,在铝胶薄膜表面生成聚合氯化铝 ,经灼烧进一步固化而制得表面包覆聚合氯化铝吸附材料。该吸附材料作为絮凝剂可循环使用约 17次。用于处理造纸污水 ,COD、BOD、悬浮物、硫化物、色度等指标可分别降低约 93%、77%、96 %、94 %和 80 %。