Effects of washing with water on enzymatic saccharification and d-lactic acid production from steam-exploded sugarcane bagasse

This study investigated the production of d-lactic acid from unutilized sugarcane bagasse using steam explosion pretreatment. The optimal steam pressure for a steaming time of 5?min was determined. The steam-exploded sugarcane bagasse was hydrolyzed using cellulase (Meicelase) and then the hydrolyzate was subjected to fermentation substrate. By enzymatic saccharification using Meicelase, the highest recovery of glucose from raw bagasse, 73.7?%, was obtained at a steam pressure of 20?atm. For extracted residue with water after steam explosion, the glucose recovery increased up to 94.9?% at a steam pressure of 20?atm. These results showed that washing with water is effective in removing enzymatic reaction inhibitors. After steam pretreatment (steam pressure of 20?atm), d-lactic acid was produced by Lactobacillus delbrueckii NBRC 3534 from the enzymatic hydrolyzate of steam-exploded bagasse and washed residue. The conversion rate of d-lactic acid obtained from the glucose concentration was 66.6?% for the hydrolyzate of steam-exploded bagasse without washing with water and 90.0?% for that derived from the extracted residue with water after steam explosion. These results also demonstrated that the hydrolyzate of steam-exploded bagasse (without washing with water) contains fermentation inhibitors and washing with water can remove them.     

PCDD/PCDF formation in the chlor-alkali process—laboratory study and comparison with patterns from contaminated sites

Studies on the formation of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) during the electrolysis of sodium chloride solution (brine) using graphite or titanium electrodes were carried out at a laboratory scale. High concentrations of PCDFs but no PCDDs were formed in tests using graphite electrodes. With titanium electrodes, PCDFs were only formed when tar pitch was added and mainly originated from the dibenzofuran present in the tar. For the first time, a detailed assessment of the formation of mono- to octachlorinated PCDD/PCDF from tar pitch was investigated. The assessment included of the chlorination steps proved that PCDFs were formed by successive lateral chlorinated from dibenzofuran to MonoCDFs, DiCDFs, and TriCDFs to form the typical known “chlorine pattern” of TetraCDF to OctaCDF with a dominance of 1,2,7,8- and 2,3,7,8-TetraCDFs, 1,2,3,7,8-PentaCDF, and 1,2,3,4,7,8-HexaCDF as marker congeners. The final homologue distributions depended on reaction time and reaction temperature. In addition, electrolysis with non-chlorinated dibenzo-p-dioxins, dibenzofuran, and biphenyl was carried out. As a result, PCDDs, PCDFs, and PCB were formed at comparable yields. Congener patterns in soil samples from a PCDD/F-contaminated site where chlor-alkali electrolysis had been operated for decades in Japan had identical isomer distribution demonstrating the source and contamination potential and risk of these processes. Therefore, sites where in the past 120 years chlor-alkali electrolysis has been operated or where residues from chlor-alkali production or other chlorine using industries have been disposed should be assessed for their pollution level and exposure relevance. The assessment of total organohalogen content revealed that PCDF is only a small fraction of organohalogens in the contaminated soils. For an appropriate risk assessment, also other chlorinated aromatic compounds such as PCBs or PCNs need to be considered.     

Radium geochemistry in Na-Cl type groundwater in Niigata Prefecture, Japan

Radium isotopes in 23 Na-Cl type groundwater sampled mainly from deep wells in Niigata Prefecture, which is the site of the largest oil- and gas-fields in Japan, were measured along with U isotopes, chemical components and hydrogen and oxygen isotope ratios to elucidate the distribution and behavior of Ra in a brackish environment underground. Also analyzed were U and Th isotopes in 38 rock samples collected from outcrops at 17 locations. Ra-226 concentrations (8.86-1637 mBq kg⁻¹) of groundwater samples roughly correlated with total dissolved solid (TDS) concentrations and other alkaline earth contents. Their ²²⁸Ra/²²⁶Ra activity ratios (0.32-5.2) were similar to or higher than the ²³²Th/²³⁸U activity ratios (0.6-1.7) in the rocks. The most likely transport mechanism of Ra isotopes into groundwater was due to their α-recoil from the solid phase, probably from the water-rock interface where Th isotopes had accumulated, and adsorption/desorption reaction based on the increase in ²²⁶Ra contents with TDS.     

Perfluorosulfonates and perfluorocarboxylates in snow and rain in Dalian,China

Samples of precipitation events (snow and rain) in Dalian, a typical coastal town in China, were analyzed for perfluorosulfonates (PFSAs) and perfluorocarboxylates (PFCAs) to investigate atmospheric contamination by these compounds. In the snow event on December 16, 2006, samples were collected from 21 different sites and in another 6 precipitation events, samples were collected from a single location. Four PFSAs (C4, C6, C8, C10) and seven PFCAs (C6–12) were analyzed. Among the homologues, perfluorooctane sulfonate (PFOS) concentrations were the highest with a geometric mean (GM) of 145 ng/L (n = 21) during the snow event on December 16, 2006, followed by perfluorooctanoate (PFOA) with a GM of 24.7 ng/L (n = 21). Concentrations of perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS) and perfluoroheptanoate (PFHpA) were more than two orders of magnitude lower than that of PFOS. Other PFSAs and PFCAs were found to be below the limit of detection in all the samples. In other 6 precipitation events, PFSAs and PFCAs were detected approximately in the same order of magnitude in both snow and rain. The results indicate that wet deposition may be a potential transport mechanism of perfluorinated chemicals in the environment.     

Supercritical methanol for polyethylene terephthalate depolymerization: observation using simulator

To apply PET depolymerization in supercritical methanol to commercial recycling, the benefits of supercritical methanol usage in PET depolymerization was investigated from the viewpoint of the reaction rate and energy demands. PET was depolymerized in a batch reactor at 573 K in supercritical methanol under 14.7 MPa and in vapor methanol under 0.98 MPa in our previous work. The main products of both reactions were the PET monomers of dimethyl terephthalate (DMT) and ethylene glycol (EG). The rate of PET depolymerization in supercritical methanol was faster than that of PET depolymerization in vapor methanol. This indicates supercritical fluid is beneficial in reducing reaction time without the use of a catalyst. We depicted the simple process flow of PET depolymerization in supercritical methanol and in vapor methanol, and by simulation evaluated the total heat demand of each process. In this simulation, bis-hydroxyethyl terephthalate (BHET) was used as a model component of PET. The total heat demand of PET depolymerization in supercritical methanol was 2.35 x 10(6)kJ/kmol Produced-DMT. That of PET depolymerization in vapor methanol was 2.84 x 10(6)kJ/kmol Produced-DMT. The smaller total heat demand of PET depolymerization in supercritical methanol clearly reveals the advantage of using supercritical fluid in terms of energy savings.     

Thermal decomposition of guaiacol in sub- and supercritical water and its kinetic analysis

The conversion of biomass waste into resources as a recycling process is receiving increased interest due to the perceived need for a sustainable global carbon cycle and environmental considerations. Several treatment processes are being developed. Hydrothermal treatment is one of the most effective approaches, because water at high temperatures and high pressures behaves as a reaction medium with remarkable properties. In this work, the reaction behavior of guaiacol as a biomass model compound was studied in subcritical water at 483–563 K and in supercritical water at 653–673 K using a batch reactor. Guaiacol can be considered representative of the aromatic ring structures present in lignin, a major component of woody biomass. The chemical species formed in aqueous products were identified by gas chromatography/mass spectrometry and quantified using high-performance liquid chromatography. The effect of pressure and reaction time on the conversion process of guaiacol is discussed. The results obtained indicate that this method has potential for efficient organic waste conversion.     

Application of an ELISA for PCB 118 to the screening of dioxin-like PCBs in retail fish

A commercially available enzyme-linked immunosorbent assay (ELISA) kit was evaluated for the determination of toxic equivalents (TEQs) of dioxin-like polychlorinated biphenyls (PCBs) in retail fish. The ELISA was highly specific for 2,3',4,4',5-pentachlorobiphenyl (PCB 118), which is generally the most abundant dioxin-like PCB isomer found in fish. The quantitative limit of the ELISA (using 3,3',4'-trichloro-4-methoxybiphenyl as a surrogate standard for PCB 118) was 10 ng ml(-1) (125 pg assay(-1)) in the standard curve, corresponding to 50 pg PCB 118 g(-1) in the tested sample. Good recoveries of PCB 118 (78.7-112.3%) were obtained for spiked purified fish extracts according to the ELISA. Good linearity was also obtained in dilution tests using purified fish extracts. No significant interference of the matrix was observed in the ELISA when this purification procedure was used. Recovery tests in which PCB 118 was added to fish samples also resulted in acceptable recoveries (60.2-82.3%) in the ELISA following purification. The ELISA results for fish samples correlated well with the TEQ concentrations of dioxin-like PCBs obtained by high-resolution gas chromatography/high-resolution mass spectrometry (r = 0.92, n = 26). These data indicate that the ELISA kit is suitable for screening retail fish for the TEQs of dioxin-like PCBs.     

Remediation of cadmium contamination in paddy soils by washing with chemicals: selection of washing chemicals

The efficiencies of neutral salts, strong acids, and chelates were tested for extracting cadmium (Cd) from three paddy soils. The higher the selectivity of the cations of the added neutral salts toward soil adsorption sites, the lower the pH in the extracts and the more soil Cd could be extracted. In addition, soil carbon and nitrogen contents and mineral composition were closely associated with the amount of Cd extracted. Calcium chloride and iron(III) chloride were selected as wash chemicals to restore Cd-contaminated paddy soils in situ. Washing with calcium chloride led to the formation of Cd chloride complexes, enhancing Cd extraction from the soils. The washing also substantially decreased soil levels of exchangeable and acid-soluble Cd, which are the major forms of bioavailable Cd for rice (Oryza sativa L.). The optimum conditions for in situ soil washing were also determined for calcium chloride.     

Trans-Pacific dispersal of loggerhead turtle hatchlings inferred from numerical simulation modeling

We used Lagrangian numerical simulations to examine the trans-Pacific dispersal processes of loggerhead turtle hatchlings. Ten thousand simulated particles were released from each of the three nesting regions in Japan and tracked for 5 years. Results showed many particles moving eastward, drifting in the Kuroshio Current followed by the Kuroshio Extension Current. However, no particles reached Baja California, a known feeding area, through passive processes, indicating that trans-Pacific transportation requires active swimming by turtles. The duration of the trans-Pacific dispersal was estimated to be at least 1.6–3.4 years, with some turtles drifting in the Kuroshio Countercurrent and remaining in the western Pacific even after 5 years. This indicates that as revealed by previous genetic studies, not all loggerheads always disperse along a trans-Pacific route. The findings showed that survival and expected growth rates varied widely according to ambient temperatures during drifting, which in turn depended on nesting location.