Positive matrix factorization as source apportionment of soil lead and cadmium around a battery plant (Changxing County,China)

Chemical compositions of soil samples are multivariate in nature and provide datasets suitable for the application of multivariate factor analytical techniques. One of the analytical techniques, the positive matrix factorization (PMF), uses a weighted least square by fitting the data matrix to determine the weights of the sources based on the error estimates of each data point. In this research, PMF was employed to apportion the sources of heavy metals in 104 soil samples taken within a 1-km radius of a lead battery plant contaminated site in Changxing County, Zhejiang Province, China. The site is heavily contaminated with high concentrations of lead (Pb) and cadmium (Cd). PMF successfully partitioned the variances into sources related to soil background, agronomic practices, and the lead battery plants combined with a geostatistical approach. It was estimated that the lead battery plants and the agronomic practices contributed 55.37 and 29.28 %, respectively, for soil Pb of the total source. Soil Cd mainly came from the lead battery plants (65.92 %), followed by the agronomic practices (21.65 %), and soil parent materials (12.43 %). This research indicates that PMF combined with geostatistics is a useful tool for source identification and apportionment.     

Occurrence,sources, and ecological risks of PBDEs,PCBs, OCPs,and PAHs in surface sediments of the Yangtze River Delta city cluster,China

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.     

改性氧化铝微波诱导催化氧化处理高浓度苯酚废水的研究

采用微波诱导催化氧化技术，以改性氧化铝为催化剂，对高浓度模拟苯酚废水进行氧化处理。考察了微波功率、催化剂投加量、H202投加量、废水pH值和微波反应时间等因素对苯酚去除效果的影响。实验结果表明，处理30mL质量浓度为1 100mg/L的苯酚模拟废水，在微波功率500W，催化剂加入量1 g(液固比30∶1)，30％双氧水...     

油田回注水中优势硫酸盐还原菌的分离鉴定与生理特性研究

从胜利油田回注水中筛选得到一株硫酸盐还原菌，命名为zsz1209。经过16SrDNA序列分析，鉴定zsz1209为梭菌属（Clostridium）。实验研究了zsz109的生理特性，并对通过调节环境pH来抑制菌株zsz1209生长繁殖的可行性进行了探讨。实验结果表明：菌株zsz1209的理想碳源为乙酸钠，在30～60℃之间可较好地生长；SOi浓度低至50mg／L时，生长未受到明显抑制。当培养环境pH高至8．5～9．0或低至3．5～4．0时，检测菌株zsz1209对SO4^2-和碳源（COD）的利用情况，发现zsz1209的生长受到明显抑制，结果表明利用改变环境pH来抑制微生物对油田的腐蚀具有可行性。     

磷石膏水热法合成硫酸钙晶须

以磷石膏为原料，二水合硫酸钙、硫酸镁、甘油为添加剂，采用水热法合成硫酸钙晶须，考察了料浆含量、反应温度、反应时间、体系pH等因素对晶须的直径和长径比的影响；并采用SEM技术观察硫酸钙晶须的形貌。实验结果表明，当磷石膏含量2.5%（w）、反应温度130 ℃、反应时间4 h、体系pH 4时，制备得到的硫酸钙晶须长径比为56.24，平均直径为0.17 μm。SEM表征结果显示，硫酸钙晶须形貌规整、分散均匀、直径较小，达百纳米级。     

Characterization of the extracellular biodemulsifiers secreted by Bacillus cereus LH-6 and the enhancement of demulsifying efficiency by optimizing the cultivation conditions

A highly efficient demulsifying strain, LH-6, was isolated from petroleum-contaminated soil and identified as Bacillus cereus by 16S rDNA gene analysis. It achieved 95.61 and 95.40 % demulsifying ratios within 12 h for water-in-oil (W/O) and oil-in-water (O/W) model emulsions, respectively. Fourier transform infrared spectroscopy (FT-IR) and thin-layer chromatography (TLC) detections indicated that the LH-6’s extracellular biodemulsifiers were different types of lipopeptides for the W/O and O/W emulsions. Optimization of the culture medium composition was conducted to improve the biosynthesis and demulsifying efficiency of the biodemulsifier. The optimal carbon source was liquid paraffin, while waste frying oil could also be an alternative carbon source. The optimal nitrogen sources were ammonium sulfate and yeast extract. To further enhance the biodemulsifier efficiency, the optimal cultivation conditions were determined using response surface methodology (RSM) based on central composite rotation design (CCRD). Using the optimized cultivation conditions, the demulsifying ratios increased to 98.23 and 97.65 % for the W/O and O/W model emulsions, respectively.     

厌氧序批式反应器内挥发性脂肪酸积累特性研究

小试规模的厌氧序批式反应器（ASBR），通过人工配水，研究了启动3个月时间以及一个运行周期内反应器内挥发性脂肪酸（VFA）的积累情况，并通过分析期间产甲烷活性的变化说明了控制VFA积累的重要性。经过近120 d的运行，乙酸和丙酸的最大比产甲烷活性分别提高了1.8和2.2倍，说明反应器的启动过程即是微生物群落的优化和选择的过程，ASBR的抗冲击的能力较强说明随启动的进行和种群的优化，活性污泥凝聚性能增强，对VFA的降解能力增强。     

Heterogeneous Fenton degradation of ofloxacin catalyzed by magnetic nanostructured MnFe2O4 with different morphologies

Environmental Science and Pollution Research - Magnetic nanostructured MnFe2O4 with different morphologies, synthesized via chemical co-precipitation and hydrothermal method, was assayed as...     

A comparative study on the raw chitin and chitosan yields of common bio-waste from Philippine seafood

Environmental Science and Pollution Research - Bio-waste materials from aquatic species are alternative sources of chitin and chitosan—high-value natural biodegradable and biocompatible...