Influence of Water Allocation and Freshwater Inflow on Oyster Production: A Hydrodynamic–Oyster Population Model for Galveston Bay,Texas, USA

A hydrodynamic–oyster population model was developed to assess the effect of changes in freshwater inflow on oyster populations in Galveston Bay, Texas, USA. The population model includes the effects of environmental conditions, predators, and the oyster parasite, Perkinsus marinus, on oyster populations. The hydrodynamic model includes the effects of wind stress, river runoff, tides, and oceanic exchange on the circulation of the bay. Simulations were run for low, mean, and high freshwater inflow conditions under the present (1993) hydrology and predicted hydrologies for 2024 and 2049 that include both changes in total freshwater inflow and diversions of freshwater from one primary drainage basin to another. Freshwater diversion to supply the Houston metropolitan area is predicted to negatively impact oyster production in Galveston Bay. Fecundity and larval survivorship both decline. Mortality from Perkinsus marinus increases, but to a lesser extent. A larger negative impact in 2049 relative to 2024 originates from the larger drop in fecundity under that hydrology. Changes in recruitment and mortality, resulting in lowered oyster abundance, occur because the bay volume available for mixing freshwater input from the San Jacinto and Buffalo Bayou drainage basins that drain metropolitan Houston is small in comparison to the volume of Trinity Bay that presently receives the bulk of the bay's freshwater inflow. A smaller volume for mixing results in salinities that decline more rapidly and to a greater extent under conditions of high freshwater discharge. Thus, the decline in oyster abundance results from a disequilibrium between geography and salinity brought about by freshwater diversion. Although the bay hydrology shifts, available hard substrate does not. The simulations stress the fact that it is not just the well-appreciated reduction in freshwater inflow that can result in decreased oyster production. Changing the location of freshwater inflow can also significantly impact the bay environment, even if the total amount of freshwater inflow does not change.     

The Water Poverty Index: Development and application at the community scale

The article details the development and uses of the water poverty index (WPI). The index was developed as a holistic tool to measure water stress at the household and community levels, designed to aid national decision makers, at community and central government level, as well as donor agencies, to determine priority needs for interventions in the water sector. The index combines into a single number a cluster of data directly and indirectly relevant to water stress. Subcomponents of the index include measures of: access to water; water quantity, quality and variability; water uses (domestic, food, productive purposes); capacity for water management; and environmental aspects.
The WPI methodology was developed through pilot projects in South Africa, Tanzania and Sri Lanka and involved intensive participation and consultation with all stakeholders, including water users, politicians, water sector professionals, aid agency personnel and others. The article discusses approaches for the further implementation of the water poverty index, including the possibilities of acquiring the necessary data through existing national surveys or by establishing interdisciplinary water modules in school curricula. The article argues that the WPI fills the need for a simple, open and transparent tool, one that will appeal to politicians and decision makers, and at the same time can empower poor people to participate in the better targeting of water sector interventions and development budgets in general.     

Auditing non-hazardous wastes from golf course operations: moving from a waste to a sustainability framework

This paper provides non-hazardous solid waste audit procedures and bench mark audit data for golf courses (GCs). The paper also demonstrates the narrow scope of solid waste audit data, and the need to move towards a broader auditing scope such as that contained in sustainability auditing frameworks. A case study of Clear Lake Golf Course, located in southwestern Manitoba, Canada was completed. Annual waste generation rates at the GC were estimated to be 46.2 tonnes/year with 83% of this material compostable. Grass clipping material generated from the putting greens accounted for 79% of the waste stream. The GC achieved a solid waste diversion rate of 81% (waste generated not destined for landfill per total waste material generated). A future, realistic target of 97% diversion was also identified. The 7 day audit period was found to be unsuitable for estimating grass clipping generation rates. Implementation of a broader sustainability framework for future audits will harmonize many existing management functions such as solid waste auditing, waste characterizations, pollution prevention, green procurement, customer satisfaction, and the efficiency of the operations.     

A THEORETICAL TRAVEL TIME BASED ON WATERSHED HYPSOMETRY1

ABSTRACT: The time to hydrograph peak of a watershed basin has been found to correlate with various statistical attributes (e.g., skewness and kurtosis) of its hypsometric curve (treated as probability distribution). This paper presents a theoretical travel time that is conceptually analogous to the time to hydrograph peak and can be calculated directly from the hypsometric curve of a watershed basin based on gravity and acceleration. The theoretical travel times for 23 selected watersheds in the United States are found to correlate significantly with their corresponding hypsometric attributes. In addition, the theoretical travel times are consistent with the times of concentration estimated from the Federal Aviation Administration method. Thus, this paper offers a simple theoretical explanation to the empirically identified linkage between time to hydrograph peak and hypsometric attributes. This theoretical travel time can provide an alternative way of characterizing the effects of basin morphometry on hydrologic response.     

USE OF STAGE DATA TO CHARACTERIZE HYDROLOGIC CONDITIONS IN AN URBANIZING ENVIRONMENT1

ABSTRACT: This paper presents the results of a study on the use of continuous stage data to describe the relation between urban development and three aspects of hydrologic condition that are thought to influence stream ecosystems—overall stage variability, stream flashiness, and the duration of extreme‐stage conditions. This relation is examined using data from more than 70 watersheds in three contrasting environmental settings—the humid Northeast (the metropolitan Boston, Massachusetts, area); the very humid Southeast (the metropolitan Birmingham, Alabama, area); and the semiarid West (the metropolitan Salt Lake City, Utah, area). Results from the Birmingham and Boston studies provide evidence linking increased urbanization with stream flashiness. Fragmentation of developed land cover patches appears to ameliorate the effects of urbanization on overall variability and flashiness. There was less success in relating urbanization and streamflow conditions in the Salt Lake City study. A related investigation of six North Carolina sites with long term discharge and stage data indicated that hydrologic condition metrics developed using continuous stage data are comparable to flow based metrics, particularly for stream flashiness measures.     

THE MISUSE OF HYDROLOGIC UNIT MAPS FOR EXTRAPOLATION,REPORTING, AND ECOSYSTEM MANAGEMENT1

ABSTRACT: The use of watersheds to conduct research on land/water relationships has expanded recently to include both extrapolation and reporting of water resource information and ecosystem management. More often than not, hydrologic units (HUs) are used for these purposes, with the implication that hydrologic units are synonymous with watersheds. Whereas true topographic watersheds are areas within which apparent surface water drains to a particular point, generally only 45 percent of all hydrologic units, regardless of their hierarchical level, meet this definition. Because the area contributing to the downstream point in many hydrologic units extends far beyond the unit boundaries, use of the hydrologic unit framework to show regional and national patterns of water quality and other environmental resources can result in incorrect and misleading illustrations. In this paper, the implications of this misuse are demonstrated using four adjacent HUs in central Texas. A more effective way of showing regional patterns in environmental resources is by using data from true watersheds representative of different ecological regions containing particular mosaics of geographical characteristics affecting differences in ecosystems and water quality.     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002     

Effect of Cross-Linking Waste Protein with Dialdehydes on Its Biodegradation Under Anaerobic Conditions

Most native polymers used in processing and application technologies are admittedly disposable from the environment in a biologic manner, but products possess low mechanical strength. One of the paths to increasing this attribute (if feasible) is their cross-linking, which may, however, affect their readiness to biodegradation. In the presented work this condition was observed on the example of waste protein (Hykol B) cross-linking by means of glutardialdehyde and glyoxal. Degree and course of cross-linking were determined through impedance spectroscopy. The objective of this work also was to obtain data for constructing a sensor capable of following the cross-linking course in real time, for potential industrial application of Hykol in continuous production. Impedance spectroscopy proved to be applicable even to this kind of material marked by considerable water content and exhibiting relatively high electric conductivity; so far it had been used only for materials of low conductivity. An aqueous environment inoculated with digested anaerobic sludge from a municipal wastewater treatment plant was selected for modeling anaerobic conditions. The relation was studied between cross-linking degree given by content of cross-linking agent (determined by impedance spectroscopy) and biodegradation degree under anaerobic conditions. It was confirmed that network density as given by quantity of added agent not only reduced breakdown degree but also slowed the course of the process. This fact is particularly obvious with cross-linking by means of glyoxal; network density is thus dependent on type of employed substance, which affect type and structure of created network. That not merely forms an obstacle during polymer swelling and dissolution but also prevents access of bacteria to source of metabolized organic carbon.