Modeling Streamflow and Water Quality Sensitivity to Climate Change and Urban Development in 20 U.S. Watersheds

Watershed modeling in 20 large, United States (U.S.) watersheds addresses gaps in our knowledge of streamflow, nutrient (nitrogen and phosphorus), and sediment loading sensitivity to mid‐21st Century climate change and urban/residential development scenarios. Use of a consistent methodology facilitates regional scale comparisons across the study watersheds. Simulations use the Soil and Water Assessment Tool. Climate change scenarios are from the North American Regional Climate Change Assessment Program dynamically downscaled climate model output. Urban and residential development scenarios are from U.S. Environmental Protection Agency's Integrated Climate and Land Use Scenarios project. Simulations provide a plausible set of streamflow and water quality responses to mid‐21st Century climate change across the U.S. Simulated changes show a general pattern of decreasing streamflow volume in the central Rockies and Southwest, and increases on the East Coast and Northern Plains. Changes in pollutant loads follow a similar pattern but with increased variability. Ensemble mean results suggest that by the mid‐21st Century, statistically significant changes in streamflow and total suspended solids loads (relative to baseline conditions) are possible in roughly 30‐40% of study watersheds. These proportions increase to around 60% for total phosphorus and total nitrogen loads. Projected urban/residential development, and watershed responses to development, are small at the large spatial scale of modeling in this study.     

Implications of Conceptual Channel Representation on SWAT Streamflow and Sediment Modeling

Hydrologic modeling outputs are influenced by how a watershed system is represented. Channel routing is a typical example of the mathematical conceptualization of watershed landscape and processes in hydrologic modeling. We investigated the sensitivity of accuracy, equifinality, and uncertainty of Soil and Water Assessment Tool (SWAT) modeling to channel dimensions to demonstrate how a conceptual representation of a watershed system affects streamflow and sediment modeling. Results showed the amount of uncertainty and equifinality strongly responded to channel dimensions. On the other hand, the model performance did not significantly vary with the changes in the channel representation due to the degree of freedom allowed by the conceptual nature of hydrologic modeling in the parameter calibration. Such findings demonstrated good modeling performance statistics do not necessarily mean small output uncertainty, and partial improvements in the watershed representation may neither increase modeling accuracy nor reduce uncertainty. We also showed the equifinality and uncertainty of hydrologic modeling are case‐dependent rather than specific to models or regions, suggesting great caution should be used when attempting to transfer uncertainty analysis results to other modeling studies, especially for ungauged watersheds. Editor's note: This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Influence of clay on the adsorption of heavy metals like copper and cadmium on chitosan

The influence of clay on the adsorption of heavy metals like copper and cadmium on chitosan from simulated industrial wastewater is evaluated. Chitosan–clay blend with ratio of (1:1), (1:2), and (2:1) have been prepared, and these were used as membranes to remove copper and cadmium ions from synthetic industrial wastewater. The chemical parameters for quantities of adsorption of heavy metal contamination have been done, and the kinetics of adsorption has also been carried out. Clay provides enough absorbable sites to overcome mass transfer limitations. The number of absorbable sites for cadmium is more compared to copper, and thus the rate of recovery of cadmium is faster than copper, and the percentage removal of cadmium is more than copper at all times on clay over nylon 6. This difference indicates the influence of clay in the adsorption of heavy metals in comparison to synthetic polymer nylon 6. Rate constant for first-order kinetics of adsorption, k ₁, for copper and cadmium is less than that of clay, which clearly indicates that clay, which is a natural polymer, is more kinetically favored compared to synthetic polymer. The difference in the intraparticle diffusion in both the natural and synthetic polymer is not much, and it suggests that the particle diffusion mechanism is the same in both cases. Copper and cadmium recovery is parallel at all times. The percentage of removal of copper increased with an increase in pH from 3 to 5. In the case of cadmium containing wastewater, the maximum removal of metal occurred at pH 5. The uptake amount of Cu²⁺ ions on chitosan increased rapidly with increasing the contact time from 0 to 360 min and then reaches equilibrium after 360 min, and the equilibrium constant for copper and cadmium ions are more or less the same for the adsorption reaction. There are more adsorption sites for cadmium in the presence of clay and mass transfer limitation is avoided without resorting to rotation, which is the highlight of the present work. And more so, this is pronounced in the case of natural polymer compared to synthetic polymer.     

Effect of maternal dietary hexachlorocyclohexane exposure on pup survival and growth in albino rats

Abstract

In adult albino rats, maternal dietary. ß‐ and ?‐hexachlorocyclohexane (HCH) intake during gestation upto 400 ppm level did not affect the number of litters produced. But about 50 and 100% pup mortality was found in 200 and 400 ppm ß ‐HCH group within 5 days of birth. Maternal mortality was observed in 800 ppm ß ‐HCH group during third week of gestation. The effect of maternal dietary intake of HCH isomers at 50 and 250 ppm level during gestation and/or lactation on perinatal development was also studied. The body weights and sizes of the newborn litters of mother rats exposed to dietary HCH isomers did not. differ from controls. Similarly, the growth and development of the litters of HCH exposed mother rats that survived 28 day lactation period were found to be comparable to controls as evidenced by the body weight and weight of vital organs. However, liver weight increases were found in the 28 day weaned litters wherever the mothers had been exposed to HCH isomers during lactation. Lowered kidney weight was seen in litters of mother rats fed 250 ppm ?‐HCH during gestation and lactation. The brain and testis weights were not affected in the litters of any experimental groups.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

Adsorption of Geosmin and MIB on Activated Carbon Fibers–Single and Binary Solute System

The adsorption of two taste- and odor-causing compounds, namely MIB (2-methyl isoborneol—C₁₁H₂₀O) and geosmin (C₁₂H₂₂O) on activated carbon was investigated in this study. The impact of adsorbent pore size distribution on adsorption of MIB and geosmin was evaluated through single solute and multicomponent adsorption of these compounds on three types of activated carbon fibers (ACFs) and one granular activated carbon (GAC). The ACFs (ACC-15, ACC-20, and ACC-25) with different degrees of activation had narrow pore size distributions and specific critical pore diameters whereas the GAC (F-400) had a wider pore size distribution and lesser microporosity. The effect of the presence of natural organic matter (NOM) on MIB and geosmin adsorption was also studied for both the single solute and binary systems. The Myers equation was used to evaluate the single solute isotherms as it converges to Henry’s law at low coverage and also serves as an input for predicting multicomponent adsorption. The single solute adsorption isotherms fit the Myers equation well and pore size distribution significantly influenced adsorption on the ACFs and GAC. The ideal adsorbed solute theory (IAST), which is a well-established thermodynamic model for multicomponent adsorption, was used to predict the binary adsorption of MIB and geosmin. The IAST predicted well the binary adsorption on the ACFs and GAC. Binary adsorption isotherms were also conducted in the presence of oxygen (oxic) and absence of oxygen (anoxic). There were no significant differences in the binary isotherm between the oxic and anoxic conditions, indicating that adsorption was purely through physical adsorption and no oligomerization was taking place. Binary adsorptions for the four adsorbents were also conducted in the presence of humic acid to determine the effect of NOM and to compare with IAST predictions. The presence of NOM interestingly resulted in deviation from IAST behavior in case of two adsorbents, ACC-15 and F-400.     

Coupling upland watershed and downstream waterbody hydrodynamic and water quality models (SWAT and CE-QUAL-W2) for better water resources management in complex river basins

Effective water resources management programs have always incorporated detailed analyses of hydrological and water quality processes in the upland watershed and downstream waterbody. We have integrated two powerful hydrological and water quality models (SWAT and CE-QUAL-W2) to simulate the combined processes of water quantity and quality both in the upland watershed and downstream waterbody. Whereas the SWAT model outputs water quality variables in its entirety, the CE-QUAL-W2 model requires inputs in various pools of organic matter contents. An intermediate program was developed to extract outputs from SWAT at required subbasin and reach outlets and converts them into acceptable CE-QUAL-W2 inputs. The CE-QUAL-W2 model was later calibrated for various hydrodynamic and water quality simulations in the Cedar Creek Reservoir, TX, USA. The results indicate that the two models are compatible and can be used to assess and manage water resources in complex watersheds comprised of upland watershed and downstream waterbodies.     

Studies on the distribution of beta- and gamma-isomers of hexachlorocyclohexane in rat tissues

A study of the comparative distribution pattern of beta- and gamma-isomers of hexachlorocyclohexane (HCH) in albino rat tissues as a function of duration of treatment at two dose levels revealed different accumulation patterns for the two isomers in tissues. In general, the accumulation pattern was found to be in the order: fat greater than kidney greater than lungs greater than liver greater than muscle greater than heart greater than spleen greater than brain greater than blood for beta-HCH and fat greater than brain greater than kidney greater than muscle greater than lungs greater than heart greater than spleen greater than liver greater than blood for gamma-HCH. The tissue accumulation of beta-isomer was always greater than that of gamma-isomer in any tissue except in brain. Brain beta-HCH residue levels were relatively lower than in many other tissues except blood, whereas brain gamma-HCH concentration was only next to fat. A higher dose or a longer period of treatment generally produced a more marked elevation of tissue residue levels in beta-HCH fed rats, but not in gamma-HCH treated animals.