Correction to: Water‑induced erosion potentiality and vulnerability assessment in Kangsabati river basin,eastern India

Environment, Development and Sustainability -     

Effect of epibionts on the microdistribution of chlorophyll in corals and its detection by fluorescence spectral imaging

The spatial distribution of chlorophyll in three coral species carrying invertebrate symbionts was determined using spectral imaging techniques. From each pixel of the image, full fluorescence spectral data was obtained as well as comparative ratios of fluorescence. The multipixel fluorescence map and the relative-intensity fluorescence ratios demonstrated a high concentration of chlorophyll a next to the pits of Cryptochirus coralliodytes in Favites halicora. Spectral similarity maps of Goniastrea retiformis infested with Lithophaga lessepsiana and of Millepora dichotoma infested with Savignium milleporum revealed relatively higher chlorophyll concentrations in these two corals next to the symbionts. We hypothesize that the invertebrate symbionts fertilize their immediate surroundings with their excreta, enhancing algal growth. The spectral analysis system used in this study made it possible to distinguish such changes by spatial quantitation of the fluorescence emitted from small surface areas.     

Human health risk from Heavy metal via food crops consumption with wastewater irrigation practices in Pakistan

The current study was designed to investigate the potential human health risks associated with consumption of food crops contaminated with toxic heavy metals. Cadmium (Cd) concentration in surface soils; Cd, lead (Pb) and chromium (Cr) in the irrigation water and food crops were above permissible limits. The accumulation factor (AF) was >1 for manganese (Mn) and Pb in different food crops. The Health Risk Index (HRI) was >1 for Pb in all food crops irrigated with wastewater and tube well water. HRI >1 was also recorded for Cd in all selected vegetables; and for Mn in Spinacia oleracea irrigated with wastewater. All wastewater irrigated samples (soil and food crops) exhibited high relative contamination level as compared to samples irrigated with tube well water. Our results emphasized the need for pretreatment of wastewater and routine monitoring in order to avoid contamination of food crops from the wastewater irrigation system.     

Potential recyclable materials derived from riverine litter at log boom Sungai Batu in Kuala Lumpur

Journal of Material Cycles and Waste Management - Monitoring the riverine litter was essential for the aesthetical value and reducing the negative impacts toward the human health, environment and...     

Determination of fecal contamination indicator sterols in an Australian water supply system

This paper reports a reconnaissance survey of the concentrations of sterol compounds (as indicators of fecal contamination) in a large water supply system in southeast Australia comprising a network of rivers, channels, and drains. Levels of coprostanol and cholestanol were determined in surface water and bottom sediment using gas chromatography–mass spectrometry analysis across 17 strategic sampling sites and over 12 months. Clear differences in the levels of fecal contamination were observed among sites. Four sites routinely contained high levels of the fecal indicator sterols indicated from surface water and sediment sample analysis. Coprostanol concentrations at each location varied from 0 ng/L at the reference site to 11,327 ng/L in a surface water sample of a drain directly downstream of a knackery. The majority of the sites contained coprostanol in the range of 500 to 800 ng/L. Since no fecal-associated sterol compounds were detected at the external reference sites, these were assumed to be free from fecal contamination. Sewage water discharge and/or substantial water runoff maybe the principal factors contributing to fecal contamination of the supply drains and channels.     

Comparative performance evaluation of Aspergillus lentulus for dye removal through bioaccumulation and biosorption

Dyes used in various industries are discharged into the environment and pose major environmental concern. In the present study, fungal isolate Aspergillus lentulus was utilized for the treatment of various dyes, dye mixtures and dye containing effluent in dual modes, bioaccumulation (employing growing biomass) and biosorption (employing pre-cultivated biomass). The effect of dye toxicity on the growth of the fungal isolate was studied through phase contrast and scanning electron microscopy. Dye biosorption was studied using first and second-order kinetic models. Effects of factors influencing adsorption and isotherm studies were also conducted. During bioaccumulation, good removal was obtained for anionic dyes (100 mg/l), viz. Acid Navy Blue, Fast Red A and Orange-HF dye (99.4 %, 98.8 % and 98.7 %, respectively) in 48 h. Cationic dyes (10 mg/l), viz. Rhodamine B and Methylene Blue, had low removal efficiency (80.3 % [48 h] and 92.7 % [144 h], respectively) as compared to anionic dyes. In addition to this, fungal isolate showed toxicity response towards Methylene Blue by producing larger aggregates of fungal pellets. To overcome the limitations of bioaccumulation, dye removal in biosorption mode was studied. In this mode, significant removal was observed for anionic (96.7–94.3 %) and cationic (35.4–90.9 %) dyes in 24 h. The removal of three anionic dyes and Rhodamine B followed first-order kinetic model whereas removal of Methylene Blue followed second-order kinetic model. Overall, fungal isolate could remove more than 90 % dye from different dye mixtures in bioaccumulation mode and more than 70 % dye in biosorption mode. Moreover, significant color removal from handmade paper unit effluent in bioaccumulation mode (86.4 %) as well as in biosorption mode (77.1 %) was obtained within 24 h. This study validates the potential of fungal isolate, A. lentulus, to be used as the primary organism for treating dye containing wastewater.     

Spatio-temporal variations in water quality of Nullah Aik-tributary of the river Chenab, Pakistan

This study reports the spatio-temporal changes in water quality of Nullah Aik, tributary of the Chenab River, Pakistan. Stream water samples were collected at seven sampling sites on seasonal basis from September 2004 to April 2006 and were analyzed for 24 water quality parameters. Most significant parameters which contributed in spatio-temporal variations were assessed by statistical techniques such as Hierarchical Agglomerative Cluster Analysis (HACA), Factor Analysis/Principal Components Analysis (FA/PCA), and Discriminant Function Analysis (DFA). HACA identified three different classes of sites: Relatively Unimpaired, Impaired and Less Impaired Regions on the basis of similarity among different physicochemical characteristics and pollutant level between the sampling sites. DFA produced the best results for identification of main variables for temporal and spatial analysis and separated eight parameters (DO, hardness, sulphides, K, Fe, Pb, Cr and Zn) that accounted 89.7% of total variations of spatial analysis. Temporal analysis using DFA separated six parameters (E.C., TDS, salinity, hardness, chlorides and Pb) that showed more than 84.6% of total temporal variation. FA/PCA identified six significant factors (sources) which were responsible for major variations in water quality dataset of Nullah Aik. The results signify that parameters identified by statistical analyses were responsible for water quality change and suggest the possibility of industrial, municipal and agricultural runoff, parent rock material contamination. The results suggest dire need for proper management measures to restore the water quality of this tributary for a healthy and promising aquatic ecosystem and also highlights its importance for objective ecological policy and decision making process.     

Assessing tether anchor labeling and usability in pickup trucks

Objective: The objective of this study was to investigate vehicle factors associated with child restraint tether use and misuse in pickup trucks and evaluate 4 labeling interventions designed to educate consumers on proper tether use.

Methods: Volunteer testing was performed with 24 subjects and 4 different pickup trucks. Each subject performed 8 child restraint installations among the 4 pickups using 2 forward-facing restraints: a Britax Marathon G4.1 and an Evenflo Triumph. Vehicles were selected to represent 4 different implementations of tether anchors among pickups: plastic loop routers (Chevrolet Silverado), webbing routers (Ram), back wall anchors (Nissan Frontier), and webbing routers plus metal anchors (Toyota Tundra). Interventions included a diagram label, Quick Response (QR) Code linked to video instruction, coordinating text label, and contrasting text tag.

Results: Subjects used the child restraint tether in 93% of trials. However, tether use was completely correct in only 9% of trials. An installation was considered functional if the subject attached the tether to a tether anchor and had a tight installation (ignoring routing and head restraint position); 28% of subjects achieved a functional installation. The most common installation error was attaching the tether hook to the anchor/router directly behind the child restraint (near the top of the seatback) rather than placing the tether through the router and attaching it to the anchor in the adjacent seating position. The Nissan Frontier, with the anchor located on the back wall of the cab, had the highest rate of correct installations but also had the highest rate of attaching the tether to components other than the tether anchor (seat adjustor, child restraint storage hook, around head restraint). None of the labeling interventions had a significant effect on correct installation; not a single subject scanned the QR Code to access the video instruction. Subjects with the most successful installations spent extensive time reviewing the vehicle manuals.

Conclusion: Current implementations of tether anchors among pickup trucks are not intuitive for child restraint installations, and alternate designs should be explored. Several different labeling interventions were ineffective at achieving correct tether use in pickup trucks.     

Mangrove forest decline: consequences for livelihoods and environment in South Sulawesi

Mangrove forests in the tropics and subtropics grow in saline sediments in coastal and estuarine environments. Preservation of mangrove forests is important for many reasons, including the prevention of coastal erosion and seawater intrusion; the provision of spawning, nursery, and feeding grounds of diverse marine biota; and for direct use (such as firewood, charcoal, and construction material)—all of which benefit the sustainability of local communities. However, for many mangrove areas of the world, unsustainable resource utilization and the profit orientation of communities have often led to rapid and severe mangrove loss with serious consequences. The mangrove forests of the Takalar District, South Sulawesi, are studied here as a case area that has suffered from degradation and declining spatial extent during recent decades. On the basis of a post-classification comparison of change detection from satellite imagery and a survey of households, we provide an estimate of the mangrove change in the Takalar District during 1979–2011 and the consequences of those changes. Mangrove forest areas were reduced by 66.05 % (3344 hectares) during the 33-year period of analysis, and the biggest annual negative change in dense mangrove forest cover (8.37 %) occurred during the period 2006–2011. The changes were caused mainly by the mangrove clearing and conversion to aquaculture, and consequences have been increasing forest degradation, coastal abrasion, seawater intrusion, a decline in fish capture, a reduction in juvenile shrimp and milkfish, and outbreaks of shrimp disease. On the other hand, the clearing and impoundment of mangrove forests for shrimp and seaweed culture have provided a source of foreign exchange and new opportunities for employment in the study area.