METHODOLOGY OF DELINEATING WELLHEAD PROTECTION ZONES IN CRYSTALLINE BEDROCK IN MAINE1

ABSTRACT: Delineation of contributing areas for wellhead protection around supply wells drilled into bedrock in Maine, USA, is currently achieved by assigning a fixed radius circle around the well. This project develops a methodology that incorporates hydrogeologic processes and ground water modeling (MODFLOW) and accounts for variable data availability to estimate the areas that contribute water to 26 bedrock supply wells. Outcrop fracture mapping and lineament analysis are used to characterize the fracture system. Multiple simulations are constructed of each site using ranges of values for recharge, hydraulic conductivity, and anisotropy. Uncertainty in the delineation process is accounted for by portraying the delineated areas as confidence zones that are constructed by overlapping the capture zones from the multiple simulations. The results are variable and depend on the ability to characterize a site in a way that can be easily modeled. Sites with complex hydrogeology tend to have larger contributing areas that reflect the greater uncertainty in the parameters. The majority of the sites, however, produce reasonable results that provide a much more accurate depiction of the area likely to contribute to a bedrock well than the fixed radius circle.     

Risk of amniocentesis in women screened positive for Down syndrome with second trimester maternal serum markers

In routine obstetrical practice, prior to offering invasive prenatal diagnosis, it is crucial to weigh the risks attendant on amniocentesis against the individual's risk of aneuploidy. We took advantage of a policy of follow-up of patients undergoing Down syndrome maternal serum screening to compare the rates of fetal loss before 24 weeks and of early premature delivery at 24–28 weeks between women who underwent amniocentesis and women who did not. A total of 54 902 patients entered the study, of whom 4039 (7.35%) were lost to follow-up and 387 were excluded because of a severe fetal abnormality. Of the 50 476 remaining patients, 3472 had an amniocentesis whereas 47 004 had not and served as controls. In the amniocentesis group, the fetal loss rate before 24 weeks was 1.12% (95% CI=1.08–1.15) and the 24–28 weeks premature delivery rate was 0.40% (95% CI=0.39–0.41) which was significantly higher than in controls (0.42% with 95% CI 0.41–0.43 and 0.24% with 95% CI 0.23–0.25, respectively). The 0.86% difference in adverse outcome rates between the amniocentesis and control groups may be attributable to amniocentesis and compares favourably with the positive predictive value of maternal serum markers (1.70%) observed in the present study. Copyright © 2002 John Wiley & Sons, Ltd.     

Kinetic aspects and identification of by-products during the ozonation of bitertanol in agricultural wastewaters

The degradation of bitertanol by ozone treatment is investigated. Solutions of bitertanol (8.4 μg mL^?1) were prepared either by dissolution of the standard or by dilution of Gaucho Blé seed loading solution and then ozonated under different conditions. Evolution of the concentrations of bitertanol and its ozonation by-products in both solutions was monitored by HPLC–UV as a function of the treatment time for a concentration of 100 g m^?3 of ozone in the inlet gas. Bitertanol degradation was found to follow a pseudo-first order reaction in both cases. However, the rate of the reaction in diluted seed loading solution was much lower (0.19 vs. 0.27 min^?1 in standard solution) and was close to the reaction rate observed in the presence of a radical scavenger, tert-butanol (0.11 min^?1). Thus, it may be suggested that additives present in the seed loading solution may play the role of radical scavengers. Study of ozone concentration in the inlet gas (from 25 to 100 g m^?3) showed that ozone degradation is also a first-order reaction with respect to ozone. Four ozonation by-products were highlighted, collected and identified by HPLC coupled with an ion trap mass spectrometer using positive electrospray ionization mode. A degradation pathway of bitertanol was finally proposed.     

Biological sweetening of energy gases mimics in biotrickling filters

Removal of hydrogen sulfide from waste and energy-rich gases is required, not only because of environmental health and safety reasons, but also because of operational reasons if such gases have to be used for energy generation. A biotrickling filter for the removal of ultra-high concentrations of H2S from oxygen-poor gases is proposed and studied in this work. Two laboratory-scale biotrickling filters were used to study the startup period and to determine the long-term performance of the gas sweetening process. The inlet H2S concentration ranged from 900 to 12000ppmv and two different packing materials were investigated. There was no toxicity effect observed even at a the highest H2S concentration, and maximum elimination capacities of 280 and 250g H2Sm(-3)h(-1) were obtained at gas contact times of 167 and 180s, respectively. Elemental sulfur and sulfate were found to be the most abundant end-products of the biological oxidation of sulfide when operated under microaerophilic conditions. The biotrickling filter was able to quickly recover its nominal performance after different load increases and system shutdowns simulating field operation. The results reported here show that biotreatment can be an interesting alternative to conventional gas sweetening systems normally used for such applications.     

Heat wave hazard classification and risk assessment using artificial intelligence fuzzy logic

The average summer temperatures as well as the frequency and intensity of hot days and heat waves are expected to increase due to climate change. Motivated by this consequence, we propose a methodology to evaluate the monthly heat wave hazard and risk and its spatial distribution within large cities. A simple urban climate model with assimilated satellite-derived land surface temperature images was used to generate a historic database of urban air temperature fields. Heat wave hazard was then estimated from the analysis of these hourly air temperatures distributed at a 1-km grid over Athens, Greece, by identifying the areas that are more likely to suffer higher temperatures in the case of a heat wave event. Innovation lies in the artificial intelligence fuzzy logic model that was used to classify the heat waves from mild to extreme by taking into consideration their duration, intensity and time of occurrence. The monthly hazard was subsequently estimated as the cumulative effect from the individual heat waves that occurred at each grid cell during a month. Finally, monthly heat wave risk maps were produced integrating geospatial information on the population vulnerability to heat waves calculated from socio-economic variables.     

Riparian buffer strips as a multifunctional management tool in agricultural landscapes: introduction

Catchment riparian areas are considered key zones to target mitigation measures aimed at interrupting the movement of diffuse substances from agricultural land to surface waters. Hence, unfertilized buffer strips have become a widely studied and implemented "edge of field" mitigation measure assumed to provide an effective physical barrier against nitrogen (N), phosphorus (P), and sediment transfer. To ease the legislative process, these buffers are often narrow mandatory strips along streams and rivers, across different riparian soil water conditions, between bordering land uses of differing pollution burdens, and without prescribed buffer management. It would be easy to criticize such regulation for not providing the opportunity for riparian ecosystems to maximize their provision for a wider range of ecosystem goods and services. The scientific basis for judging the best course of action in designing and placing buffers to enhance their multifunctionality has slowly increased over the last five years. This collection of papers aims to add to this body of knowledge by giving examples of studies related to riparian buffer management and assessment throughout Europe. This introductory paper summarizes discussion sessions and 13 selected papers from a workshop held in Ballater, UK, highlighting research on riparian buffers brought together under the EU COST Action 869 knowledge exchange program. The themes addressed are (i) evidence of catchment- to national-scale effectiveness, (ii) ecological functioning linking terrestrial and aquatic habitats, (iii) modeling tools for assessment of effectiveness and costs, and (iv) process understanding enabling management and manipulation to enhance pollutant retention in buffers. The combined understanding led us to consider four principle key questions to challenge buffer strip research and policy.