Pollution prevention at the 3M corporation: Case study insights into organizational incentives, resources, and strategies

3M initiated its “Pollution Prevention Pays” (3P) program in 1975 and is probably the U.S. corporation which has been most identified with using preventive strategies to reduce toxic releases. This case study draws on interviews conducted with representatives of 3M manufacturing plants and corporate staff to provide both an overview of 3M's pollution prevention efforts and explore the organizational dimensions of two types of pollution prevention projects. The analysis addresses two key questions: (1) what do 3M's accomplishments indicate about the potential for pollution prevention approaches? and (2) what are the organizational incentives, resources and strategies which underpin 3M's pollution prevention efforts?     

Fate of high loads of ammonia in a pond and wetland downstream from a hazardous waste disposal site

Halls Brook (eastern Massachusetts, USA) is a significant source of total dissolved ammonia (sum of NH(3) and NH(4)(+); (NH(3))(T)) to the Aberjona River, a water body listed for NH(3) impairment on the Clean Water Act section 303(d) list. We hypothesized (1) that (NH(3))(T) in Halls Brook derived from a hazardous waste site via groundwater discharging to a two-basin pond that feeds the brook; and (2) that transport of (NH(3))(T) to the Aberjona River was controlled by lacustrine and wetland processes. To test these hypotheses we measured (NH(3))(T) levels in the brook, the pond, and a wetlands directly downstream of the pond during both dry and wet weather over a ten month period. In addition, we analyzed sediment cores and nitrogen isotopes, and performed mass balance calculations. Groundwater discharge from beneath the hazardous waste site was the major source of (NH(3))(T) (20-67 kg d(-1)) and salinity to the north basin of the pond. The salty bottom waters of the north basin were anoxic on all sampling dates, and exhibited relatively stable (NH(3))(T) concentrations between 200 and 600 mg Nl(-1). These levels were >100-times higher than typical background levels, and 8-24-times above the acute effects level for (NH(3))(T) toxicity. Bottom waters from the north basin continuously spill over into the south basin contributing approximately 50% of the (NH(3))(T) load entering this basin. The remainder comes from Halls Brook, which receives (NH(3))(T) loadings from as yet unknown sources upstream. During storm events up to 50% of the mass of (NH(3))(T) was flushed from the south basin and into the wetlands. The wetlands acted as a (NH(3))(T) sink in dry weather in the growing season and a discharge-dependent (NH(3))(T) source to the Aberjona River during rainstorms.     

Maternal exposure to polybrominated and polychlorinated biphenyls: infant birth weight and gestational age

Understanding the influence of maternal exposures on gestational age and birth weight is essential given that pre-term and/or low birth weight infants are at risk for increased mortality and morbidity. We performed a retrospective analysis of a cohort exposed to polybrominated biphenyls (PBB) through accidental contamination of cattle feed and polychlorinated biphenyls (PCB) through residual contamination in the geographic region. Our study population consisted of 444 mothers and their 899 infants born between 1975 and 1997. Using restricted maximum likelihood estimation, no significant association was found between estimated maternal serum PBB at conception or enrollment PCB levels and gestational age or infant birth weight in unadjusted models or in models that adjusted for maternal age, smoking, parity, infant gender, and decade of birth. For enrollment maternal serum PBB, no association was observed for gestational age. However, a negative association with high levels of enrollment maternal serum PBB and birth weight was suggested. We also examined the birth weight and gestational age among offspring of women with the highest (10%) PBB or PCB exposure, and observed no significant association. Because brominated compounds are currently used in consumer products and therefore, are increasingly prevalent in the environment, additional research is needed to better understand the potential relationship between in utero exposure to brominated compounds and adverse health outcomes.     

Odorous emission reduction from a waste landfill with an optimal protection system based on fuzzy logic

Effective landfill management and operation require an accurate evaluation of the occurrence and extent of odour emission events, which are among the main causes of resident complaints and concerns, in particular in densely urbanised areas. This paper proposes a fuzzy optimal protection system (FOPS) based on fuzzy logic to manage odour production from a municipal solid waste (MSW) landfill. The case study is a MSW landfill in an old quarry site located 6 km north-west of Naples city centre (Italy). The aim is to reduce the odour nuisance in the area surrounding the landfill where there are several sensitive receptors. FOPS is based on logical relationships between local atmospheric dynamics, number and intensity of odour pollution events detected by certain fixed receptors and odour emission rate via an optimal fuzzy approach. Such system allows to start, in real time, established mitigation actions required to further reduce the odorous emissions from the landfill itself (e.g. spraying of perfumed substances and activation of extraction wells), especially when weather conditions might not be favourable and cause by causing a higher odour perception. The fuzzy system was coupled with the air pollutant transport software CALPUFF to simulate the odour dispersion in the considered area taking into account both different odour emission rates and local weather conditions. FOPS results show that this approach can be very useful as, by measuring the odour concentrations, a significant reduction of the odour exceedances over the thresholds fixed, to minimise the olfactory harassment, was observed in the whole area studied.

     

Turbulence investigation in the roughness sub-layer of a near wall flow

The turbulence behaviour along a wall roughened by pyramidal elements was analysed in the region extending from the apex of the roughness elements up to the external limit of the roughness sub-layer. The data used for the analysis were obtained by particle image velocimetry technique. The rough wall turbulent boundary layer flow is characterized by a relatively low Reynolds number. All the results on the rough wall were compared with data referring to the canonical flow on a smooth wall turbulent boundary layer. Mean values and turbulence quantities for the two flows collapse when approaching the external limit of the roughness sublayer. The quadrant analysis of the Reynolds shear stress, in the region near the surface, shows that the contribution of the sweep motions is about equivalent for the two flows (except for wall distances lower than 40 viscous units). The contribution of the ejection motions appears to be more important over the smooth wall than over the rough wall with increasing differences approaching the wall. The probability density functions of the streamwise fluctuating velocity field for the rough wall case appear to be positively skewed in the zone very close to the pyramid apex, in contrast with the behavior observed for the smooth wall case at corresponding distances from the wall. The integral and Taylor scales for the rough wall case appear to be strongly reduced by the presence of the roughness, while the Kolmogorov microscale shows higher values.     

Mechanochemistry of ibuprofen pharmaceutical

In this paper mechanochemistry has been studied in view of possible application to detoxification of expired pharmaceuticals. The experiments have been carried out with a commercial medication containing ibuprofen ((RS)-2-(4-(2-methylpropyl)phenyl)propanoic acid) which has been submitted to prolonged milling up to 40 h. When Al(OH)₃ is used as co-reagent, the first degradation step induced by the mechanochemical treatment is an acid-base reaction with the ibuprofen carboxylic acid group. The subsequent degradation follows a complex pathway leading to 1-(4-isobutylphenyl)ethanone, 1-isobutyl-4-vinylbenzene and 2-(4-(3-methylbutan-2-yl)phenyl)propan-1-ol after 10 h milling and, in addition, 1-(4-acetylphenyl)-2-methylpropan-1-one, 1-(4-(1-hydroxy-2-methylpropyl)phenyl)ethanone and 1-(4-(2-hydroxy-2-methylpropyl)phenyl)ethanone after 40 h milling. The degradation reaction path and products have been identified by means of FT-IR spectroscopy, thin layer chromatography, NMR spectroscopy, mass spectroscopy and elemental analysis. The observed ibuprofen decarboxylation makes the drug simultaneously lose both its pharmaceutical activity and toxicity.     

Mechanical properties of Municipal Solid Waste by SDMT

In the paper the results of a geotechnical investigation carried on Municipal Solid Waste (MSW) materials retrieved from the “Cozzo Vuturo” landfill in the Enna area (Sicily, Italy) are reported and analyzed. Mechanical properties were determined both by in situ and laboratory large-scale one dimensional compression tests.While among in situ tests, Dilatomer Marchetti Tests (DMT) is used widely in measuring soil properties, the adoption of the DMT for the measurements of MSW properties has not often been documented in literature. To validate its applicability for the estimation of MSW properties, a comparison between the seismic dilatometer (SDMT) results and the waste properties evaluated by laboratory tests was carried out.Parameters for “fresh” and “degraded waste” have been evaluated. These preliminary results seems to be promising as concerns the assessment of the friction angle of waste and the evaluation of the S-wave in terms of shear wave velocity. Further studies are certainly required to obtain more representative values of the elastic parameters according to the SDMT measurements.