The modeling and analysis of transesterification reaction conditions in the selection of optimal biodiesel yield and viscosity

Among alternative fuels, biodiesel has been emphasized as a substantial candidate for diesel engines because of many advantages. However, the main shortcomings preventing more widespread use of biodiesel are high production cost and viscosity. In order to simultaneously overcome both of these shortcomings, the reaction conditions for the transesterification of waste cooking oil (WCO) were optimized using Taguchi and the full factorial design approaches. The analyses of signal to noise ratio and variance were also performed to identify the dominance of reaction conditions on viscosity and biodiesel yield. As a result, the optimal reaction conditions giving the lowest kinematic viscosity (3.991 cSt) and the highest biodiesel yield (98.19%) were determined to be as follows: sodium methoxide amount of 1.00 wt%, reaction time of 60 min, reaction temperature of 55 °C, and methanol to oil molar ratio of 6:1. The catalyst amount and methanol to oil molar ratio were found to be the most significant conditions influencing on the viscosity (10.36% and 78.87% contributions) and the yield (58.48% and 20.17% contributions), respectively. Finally, all physicochemical properties of final waste cooking oil biodiesel (WCOB) produced under optimal reaction conditions were found to meet the EN 14214.     

Prenatal diagnosis of congenital cystic adenomatoid lung malformation: A report of seven cases

Six cases of macrocystic and one case of microcystic congenital adenomatoid lung malformation were diagnosed by ultrasound between 20 and 31 weeks of gestation. Combined polyhydramnios and fetal hydrops was present in three cases, polyhydramnios alone in one case, and isolated fetal hydrops also in one case. In the remaining two cases, both polyhydramnios and fetal hydrops were absent. Fetal outcome was poor, i.e., two terminations of pregnancy, three early neonatal deaths, and two survivors.     

Congenital myotonic dystrophy: An often unsuspected cause of severe polyhydramnios

Two cases of severe polyhydramnios are presented in which the unsuspected diagnosis of myotonic dystrophy was made in the patient and the fetus.     

Mosaicism and accuracy of prenatal cytogenetic diagnoses after chorionic villus sampling and placental biopsies

Discrepant chromosome findings in placenta and fetus (false negative and false positive) after chorionic villus sampling (CVS) are mainly due to confined mosaicism. Non-mosaic normal or abnormal chromosome counts after direct preparation and culture nearly always correctly reflect the fetal chromosome constitution. False-negative results have almost exclusively been restricted to cytotrophoblast cells not representing a fetal chromosome abnormality. Diagnosis of placental mosaicism definitely requires an adequate follow-up by amniocentesis, fetal blood sampling, or sonography before a pregnancy is terminated. When direct preparations and cultured cells are used for cytogenetic diagnoses and placental mosaicism is not taken as proof for a chromosomal abnormality in the fetus, CVS is an accurate diagnostic tool.     

Maternal serum alpha-fetoprotein and fetal triploidy

Fetal triploidy is commonly found in early pregnancy. The majority of these pregnancies spontaneously abort in the first trimester. Occasionally, the pregnancy progresses to the second and third trimesters. We reviewed the maternal serum alpha-fetoprotein (MSAFP), amniotic fluid alpha-fetoprotein (AFP), amniotic fluid acetylcholinesterase (ACHE), fetal pathology, and placental pathology in sex second-trimester pregnancies complicated by fetal triploidy. Four of these patients had MSAFP values greater than 7.5 multiples of the median (MoM). Five of six pregnancies had MSAFP values greater than 2.25 MoM. All five of these patients had a partial mole. Four patients had amniotic fluid AFP values greater than 2.0 MoM. Two fetuses had associated neural tube defects. These were the only patients with positive amniotic fluid ACHE. None of the other patients had fetuses with anomalies that are known to be associated with an elevated MSAFP. The elevated MSAFP appeared to be related to the presence of a partial mole. Two of the five cases with an MSAFP greater than 2.25 MoM did not have sonographic evidence of a significant anomaly. Therefore, karyotyping can be of benefit in evaluating patients with elevated MSAFP.     

Patterns of metals and arsenic poisoning in Vibrio fischeri bacteria

The Microtox bioassay was used to establish dose-response curves for some toxic elements in aqueous solutions, namely, Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) and As(III). Experiments were carried out at either pH 6.0 or pH 7.0 to indicate that pH may influence the measured toxicity of some elements due to pH-related changes of their chemical speciation. EC20 values, which represent a measurable threshold of toxicity, were determined for each element and were found to rank as Pb(II)>Ag(I)>Hg(II) approximately Cu(II)>Zn(II)>As(V)>Cd(II) approximately Co(II)>As(III)>Cr(VI). These values were compared to the limit concentrations allowed in industrial wastewater according to the official regulations in Catalonia (Spain). It appears that the Microtox test is sensitive enough for detecting some of the tested elements with respect to official regulations of Catalonia (Spain) dealing with pollution control, with the exception of cadmium, mercury, arsenate, arsenite and chromate.     

Composition of wet and bulk deposition in Erzurum, Turkey

Seasonal variations in the chemical characteristics of wet and bulk deposition samples collected in Erzurum were investigated for the period March 2002-January 2003. Major cations (Ca2+, K+, Mg2+) and major anions (SO4(2-),NO3-) were determined in bulk and wet deposition samples; pH was also measured in wet deposition. The average pH of the wet deposition at Erzurum was 6.6 due to extensive neutralization of the acidity. A strong relationship between pH and SO4(2-) concentrations was observed in all seasons; however, only a weak relationship was found between pH and NO3-. On a seasonal basis, the correlation between Ca2+ and SO4(2-) concentrations was stronger in winter than in summer. Seasonal variations of ions were examined in both wet and bulk deposition samples. Although maximum concentrations of anions generally occurred during winter and spring, cation concentrations peaked in summer for both wet and bulk deposition. Results indicated that Ca2+ was the dominant cation and SO4(2-) the dominant anion in all deposition samples at Erzurum. Even though correlations among the crustal ions (calcium, magnesium and potassium) were high, the relationship between anthropogenic ions (sulfate and nitrate) was less clear in bulk deposition.     

Application of response surface methodology for the optimization of biodiesel production from yellow mustard (Sinapis alba L.) seed oil

In the present study, response surface methodology (RSM) involving central composite design (CCD) was applied to optimize the reaction parameters of biodiesel production from yellow mustard (Sinapis alba L.) seed oil during the single-step transesterification process. A total of 30 experiments were designed and performed to determine under the effects of variables on the biodiesel yield such as methanol to oil molar ratio (2:1–10:1), catalyst concentration (0.2–1.0 wt.% NaOH), reaction temperature (50–70°C), and reaction time (30–90 min). The second order polynomial model was used to predict the biodiesel yield and coefficient of determination (R²) was found to be at 0.9818. The optimum biodiesel yield was calculated as 96.695% from the model with the following reaction conditions: 7.41:1 of methanol to oil molar ratio, 0.63 wt. % NaOH of catalyst concentration, 61.84°C of reaction temperature, and 62.12 min of reaction time. It is seen that the regression model results were in agreement with the experimental data. The results showed that RSM is a suitable statistical technique for optimizing the reaction parameters in the transesterification process in order to maximize the biodiesel yield.     

Genotoxic effects of metals on human salivary gland tissue and lymphocytes as detected by the Comet assay

The etiology of salivary gland malignancies still remains unclear. Metal compounds are of special interest since they show ubiquitous presence in the environment, are present in many working places, and are accepted (co-)carcinogens in some other malignancies. Metals enter the body as xenobiotics by inhalation or ingestion. This study investigated the genotoxic potential of sodium dichromate (Na₂Cr₂O₇), nickel sulfate (NiSO₄), cadmium sulfate (CdSO₄) and zinc chloride (ZnCl₂) on human salivary gland cells and lymphocytes. Macroscopically healthy tissue of salivary glands was harvested from 46 patients during surgery and isolated to single cells by enzymatic digestion. The cells were incubated with Na₂Cr₂O₇, NiSO₄, CdSO₄ or ZnCl₂. Na₂Cr₂O₇ was also incubated in combination with the other metal compounds listed. Carcinogenic and co-carcinogenic effects of cadmium were tested by incubation with Na₂Cr₂O₇ and consecutive repair intervals. DNA damage and repair were evaluated by the Comet assay, determining DNA-strand breaks. The extent of damage was quantified using a digital analysis system. Na₂Cr₂O₇ produced significantly enhanced DNA-strand breaks in human salivary gland tissue and lymphocytes. All other metal compounds exerted no damaging effect on both cell types. Co-incubation of Na₂Cr₂O₇ with the other metals revealed a significant additive effect only for CdSO₄. Specific analysis of the influence of cadmium showed a reduction of DNA-repair after Na₂Cr₂O₇-induced strand breaks in salivary gland cells. This study provides evidence that exposure to distinct metals may significantly contribute to malignant salivary gland tumors. In consequence, further studies as epidemiological and toxicological data are warranted to determine the role of distinct metals as potential (co-) carcinogens.