Pathways of arsenic uptake and incorporation in estuarine phytoplankton and the filter-feeding invertebrates Eurytemora affinis,Balanus improvisus and Crassostrea virginica

Arsenic uptake from water and from phytoplankton was followed in the copepod Eurytemora affinis and the barnacle Balanus improvisus collected from the Patuxent River estuary, Chesapeake Bay, eastern coast of the USA in 1987, and in the oyster Crassostrea virginica obtained from a hatchery on the shore of Chesapeake Bay in 1987. Dissolved arsenic was readily taken up by phytoplankton and by shell material of B. improvisus and C. virginica; however, no dissolved arsenic was incorporated into the invertebrate tissues. When E. affinis, B. improvisus and C. virginica were fed phytoplankton containing elevated arsenic contents, significant arsenic incorporation occurred. Juvenile B. improvisus incorporated relatively more arsenic than adults of all three species. Compared to the 100 to 200% increase in arsenic content by phytoplankton exposed to dissolved arsenic, the 25 to 50% increase in these invertebrate species via trophic transfer is relatively small. Even though the trophic pathway for arsenic transfer is the major one for higher trophic levels within an ecosystem, the potential for direct arsenic impact to trophic levels other than phytoplankton appears to be minimal.     

Properties of concrete paving blocks made with waste marble

Marble industry produces large amounts of waste marble - what causes environmental problems. In paving blocks based on two cement types we have partly replaced aggregate with waste marble. Physical and mechanical tests were performed on blocks so produced. The cement type turns out to be an important factor. Mechanical strength decreases with increasing marble content while freeze-thaw durability and abrasive wear resistance increase. Waste marble is well usable instead of the usual aggregate in the concrete paving block production.     

Possible human health risk of some heavy metals from consumption of tilapia fish from Lake Mariut,Egypt

Environmental Science and Pollution Research - Lake Mariut Main Basin (MB) is not only one of the three basins composing Lake Mariut (LM) but is also the main source of the popular tilapia fish to...     

Biodegradation of trifluralin in Harran soil

Degradation of trifluralin (alpha, alpha, alpha-trifluoro-2,6-dinitro-N,N-dipropyl-p-toluidine) was investigated in soils taken from three different locations at Harran region of Turkey under laboratory conditions. Surface (0-10 cm) soils, which were taken from a pesticide untreated field Gürgelen, Harran-1 and Ikizce regions in the Harran Plain. were incubated in biometer flasks for 350 days at 25 degrees C. Ring-UL-14C-trifluralin was applied at the rate of 2 microg g(-1) with 78.7 kBq radioactivity per 100 g soil flask. Evolved (14)CO2 was monitored in KOH traps throughout the experiment. Periodically, soil sub-samples were removed and extracted by supercritical fluid extraction (SFE). Unextractable soil-bound 14C residues were determined by combustion. During the 350 days incubation period 6.6, 5.4, and 3.3/' of the applied radiocarbon was evolved as (14)CO2 from the Harran-1, Gürgelen, and Ikizce soil, respectively. At the end of 350 days the SFE-extractable and bound 14C-trifluralin residues were 39.0 and 29.2% of the initially applied herbicide in Gürgelen soil. The corresponding values for Harran-1 and Ikizce soils were 36.2, 28.4% and 41.6, 18.5% respectively.     

Materials,fuels, upgrading,economy, and life cycle assessment of the pyrolysis of algal and lignocellulosic biomass: a review

Climate change issues are calling for advanced methods to produce materials and fuels in a carbon–neutral and circular way. For instance, biomass pyrolysis has been intensely investigated during the last years. Here we review the pyrolysis of algal and lignocellulosic biomass with focus on pyrolysis products and mechanisms, oil upgrading, combining pyrolysis and anaerobic digestion, economy, and life cycle assessment. Products include oil, gas, and biochar. Upgrading techniques comprise hot vapor filtration, solvent addition, emulsification, esterification and transesterification, hydrotreatment, steam reforming, and the use of supercritical fluids. We examined the economic viability in terms of profitability, internal rate of return, return on investment, carbon removal service, product pricing, and net present value. We also reviewed 20 recent studies of life cycle assessment. We found that the pyrolysis method highly influenced product yield, ranging from 9.07 to 40.59% for oil, from 10.1 to 41.25% for biochar, and from 11.93 to 28.16% for syngas. Feedstock type, pyrolytic temperature, heating rate, and reaction retention time were the main factors controlling the distribution of pyrolysis products. Pyrolysis mechanisms include bond breaking, cracking, polymerization and re-polymerization, and fragmentation. Biochar from residual forestry could sequester 2.74 tons of carbon dioxide equivalent per ton biochar when applied to the soil and has thus the potential to remove 0.2–2.75 gigatons of atmospheric carbon dioxide annually. The generation of biochar and bio-oil from the pyrolysis process is estimated to be economically feasible.

     

Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

Polychlorinated biphenyls and organochlorine pesticides in amniotic fluids of pregnant women in south-central Turkey†

The concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were determined in amniotic fluid of 200 pregnant women from the Cukurova region of Turkey. The concentrations of OCPs [hexachlorocyclohexane (HCH), hexachlorobenzene (HCB), dichlorodiphenyl trichloroethane (p,p′-DDT), and various metabolites], and different PCB congeners (28, 52, 101, 118, 138, 153, 180) were determined by gas chromatography with electron capture detection as follows: HCB 6.6 ± 4.7, ΣHCH 21.6 ± 14.2, ΣDDT 12.5 ± 7.5, and ΣPCBs 74.0 ± 54 ng mL^?1. Correlations of maternal or gestational age and levels of OCPs and PCBs were not significant. The levels of these organochlorine compounds (OCs) were below detection limit for 5% of the samples, 80% contained more than one OC. This study illustrates that prenatal exposure of a fetus to OCs is prevalent in the Cukurova region.     

Design solutions to coastal human-wildlife conflicts

Coastal areas can be a challenge for conservation due to multiple competing land uses including development, tourism, and extractive resource use. These multiple land uses often lead to human-wildlife conflicts. Here we propose that collaboration with industrial designers and architects has the potential to generate innovative and effective solutions to coastal human-wildlife conflicts. Many products for modifying animal behavior are already used by conservationists, such as barriers, corridors, and model predators. We propose that their effectiveness, quality, harmonization with local values, and integration with the designed human environment can be improved through collaboration with designers and architects. We illustrate this approach with a case study. We engaged in an industrial design- conservation collaboration focused on the design of multiple product proposals that would support a range of human-sea lion interactions in public parks and the fish market in Valdivia, Chile. The sea lions in Valdivia are a tourist attraction but also potentially dangerous. We produced images of seven proposed products of varying scales, facilitating a range of different sea lion- human interactions. Such collaborations can be useful for developing products that reduce human-wildlife conflicts and align conservation and management with local values. We urge researchers to publish conservation design proposals as well as tests of existing conservation products?? functionality, in order to improve conservation design practice around the world.     

The legal environmental risk analysis (LERA) sample of mining and the environment in Turkish legislation

As advancing technology and increasing demands for natural resources continue to mount pressure on the environment, environmental conservation and sustainable management have become ever more important. Individual countries have been increasingly taking action to reduce environmental destruction caused by human activities in an attempt to find a balance in between the necessary exploitation of resources and environmental conservation. In Turkey, the struggle between environmental conservation and mining activities is set within the legal context, with the requisite legal regulations (which describe various procedures) in the midst of being updated or renewed. The legal environmental risk analysis (LERA), beginning by discussing the main legal regulations of environmental conservation in relation to mining activities, defines basic environmental components which form the basis of environmental conservation in relation to mining, and analyzes the impact of mining on each component. The analysis (LERA) finishes with an evaluation of the components as they currently stand and makes some suggestions for the improvement of insufficient regulations.