Halopriming imparts tolerance to salt and PEG induced drought stress in sugarcane

Sugarcane, a glycophyte grown in the tropical and subtropical regions, is frequently subjected to soil salinity, affecting the yield and quality of the harvest. The ameliorative efficiency of salt priming on emergence and plantlet growth was examined in sugarcane cultivars which are known to vary in salt tolerance under field conditions. Salt priming with NaCl (100 mM) improved both the percent and rate of germination of the sets of the tolerant (Co 62175) and moderately tolerant (CoM 265) varieties compared to sensitive (CoC 671) and test variety (Co 86032). Salt priming during germination also improved the growth performance of two-month-old sugarcane plants in terms of shoot length, shoot and root fresh weight when subjected to 15 day iso-osmotic (−0.7 MPa) NaCl (150 mM) or polyethylene glycol (PEG 8000; 20%, w/v) stress. The primed plants exhibited lower salt- and dehydration-induced leaf senescence. The results suggest salt priming as an efficient approach for imparting abiotic stress tolerance in sugarcane.     

Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

Identification and elucidation of anthropogenic source contribution in PM10 pollutant: Insight gain from dispersion and receptor models

Source apportionment study of PM₁₀ (Particulate Matter) in a critically polluted area of Jharia coalfield, India has been carried out using Dispersion model, Principle Component Analysis (PCA) and Chemical Mass Balance (CMB) techniques. Dispersion model Atmospheric Dispersion Model (AERMOD) was introduced to simplify the complexity of sources in Jharia coalfield. PCA and CMB analysis indicates that monitoring stations near the mining area were mainly affected by the emission from open coal mining and its associated activities such as coal transportation, loading and unloading of coal. Mine fire emission also contributed a considerable amount of particulate matters in monitoring stations. Locations in the city area were mostly affected by vehicular, Liquid Petroleum Gas (LPG) & Diesel Generator (DG) set emissions, residential, and commercial activities. The experimental data sampling and their analysis could aid understanding how dispersion based model technique along with receptor model based concept can be strategically used for quantitative analysis of Natural and Anthropogenic sources of PM₁₀.     

Uranium quantification in groundwater and health risk from its ingestion in Haryana,India

Uranium is a naturally occurring radioactive element which may cause toxicological or radiological hazards to the public if present in drinking water. This study reports the quantification of uranium in groundwater of major towns of the district Fatehabad, Haryana, India. Uranium concentrations ranged between 0.3 and 48 μg L^?1. In 22% of the groundwater samples, uranium concentrations were higher than the World Health Organization maximum permissible limit of 30 µg L^?1. The radiological dose for males was found to be in the range of 4.8?×?10^?4–7.1?×?10^?2 mSv y^?1 and for females 3.5?×?10^?4–5.2?×?10^?2 mSv y^?1. The results showed that due to the ingestion of groundwater in the study area, radiological cancer risk is in the range of 9.1?×?10^?7–1.3?×?10^?4, lower than the risk limit. Uranium ingestion from groundwater varied from 0.02 to 3.5 µg kg^?1 day^?1, which is within acceptable limit.     

Fluoride distribution in groundwater and survey of dental fluorosis among school children in the villages of the Jhajjar District of Haryana,India

Fluoride concentration of groundwater reserves occurs in many places in the world. A critical area for such contamination in India is alluvial soil of the plain region, consisting of five blocks (Jhajjar, Bahadurgarh, Beri, Matanhail, and Sahalawas) of the Jhajjar District adjacent to the National Capital Territory of India, New Delhi. The purpose of this study was to assess the association between water fluoride levels and prevalence of dental fluorosis among school children of the Jhajjar District of Haryana, India. The fluoride content in underground drinking water sources was found to vary in villages. Hence, the villages were categorized as high-fluoride villages (1.52–4.0 mg F/l) and low/normal-fluoride villages (0.30–1.0 mg F/l). The source of dental fluorosis data was school-going children (7–15 years) showing different stages and types of fluorosis who were permanent resident of these villages. The fraction of dental fluorosis-affected children varied from 30% to 94.85% in the high-fluoride villages and from 8.80% to 28.20% in the low/normal-fluoride villages. The results of the present study revealed that there existed a significant positive correlation between fluoride concentration in drinking water and dental fluorosis in high-fluoride villages (r = 0.508; p < 0.001) and insignificant correlation in low-fluoride villages.     

Abundance and diversity of the phyllosphere bacterial communities of Mediterranean perennial plants that differ in leaf chemistry

Summary.  We studied the epiphytic bacterial communities of the summer leaves of eight perennial species naturally occurring in a Mediterranean ecosystem. The species differ in essential-oil content (from rich in essential oil to non-producers) and composition, and also in life form (from herbaceous species to tall shrubs). We compared the epiphytic bacterial communities on the basis of (i) their abundance, (ii) their metabolic profile (derived by use of the BIOLOG Ecoplate system) and (iii) richness and diversity of substrates that they use, as a measure of functional diversity. Among all species, the aromatic Melissa officinalis was the most abundantly colonized. The bacterial communities on the leaves of the aromatic Myrtus communis, Calamintha nepeta and Melissa officinalis, and also of Cistus incanus catabolized all 31 substrates offered; those on the evergreen-sclerophyllous species, Arbutus unedo and Quercus coccifera, catabolized only 14 and 17 substrates, respectively. Carbohydrates were consistently used abundantly by all communities, whereas carboxylic acids were most variably used. On average, the group of aromatic plants scored higher regarding bacterial abundance, and richness and diversity of substrates used by the bacterial communities on their leaves; the lowest values for both substrate-use indices were recorded in A. unedo. Bacterial abundance or richness or diversity of substrates used did not vary with leaf oil content. Abundance was positively correlated with both substrate-use indices. Results support claims that the antimicrobial effects of essential oils are not exerted so much under natural conditions as reports based on biassays with pathogens usually show. Although essential oils play a part in the microbial colonization of the phyllosphere, it is not likely that inhibition of phyllosphere bacteria is essential oils’ primary role, at least in the Mediterranean environment.     

Experimental investigation of groundwater contamination by surface sources: Determination of adsorption capacity,diffusion, and sorption potential of selected anions in different soils

The present study investigated the fate and transport of two significant anions through soil to explore their potential as groundwater contaminants. The retention properties of chloride and sulfate in soils having several significantly different characteristics (soil‐1 and soil‐2) were determined using adsorption test and adsorption‐diffusion column experiments. The maximum adsorption capacity of chloride was 3.7 and 1.16 mg/g, respectively, in soil‐1 and soil‐2, with organic matter (OM) content of 3.92% and 4.69%, respectively. The sulfate adsorption obtained was 24.09% and 13.83%, respectively, in the two soils. The anions exhibited monolayer adsorption in the soils with replacement of hydroxyl ions from soils as the major mechanism of adsorption. On the other hand, the adsorption capacities obtained from the adsorption‐diffusion column experiment were about 100 times lower compared to that of the column tests of both of the soils. The maximum adsorption capacity of chloride was 0.03 mg/g and 0.01 mg/g, respectively, in soil‐1 and soil‐2, whereas that of sulfate was 0.04 mg/g and 0.03 mg/g. The empirical relation for depth of penetration (d) from a known spillage onto the soil surface was determined as a function of sorption capacity (S) and initial anion concentration (C) as d = 0.0073e^(?57S)C and d = 0.0038e^(?35S)C for chloride and sulfate, respectively.     

A review on ex situ mineral carbonation

The increased CO₂ quantities in the environment have led to many harmful effects. Therefore, it is very important to decrease the CO₂ levels in the environment. CO₂ capture along with safe and permanent storage using mineral CO₂ sequestration method can play an important role to reduce carbon emissions into the environment. Mineral sequestration is a stable storage method that provides long-term storage and an appropriate substitute for the more popular geological storage method. The process is most suited for places where there is a lack of underground cavities for underground geological storage. Minerals rich in Ca and Mg are used predominantly in carbonation reactions. In addition, those alkaline wastes that are rich in Mg and Ca such as cement waste, steel slag and many process ashes can also be employed in CO₂ sequestration. Mineral carbonation could be used for the sequestration of billions of tonnes of CO₂ every year. However, various drawbacks related to mineral carbonation still need to be addressed, such as resolving the slow rate of reactions, necessity of large amounts of feedstock, decreasing the high overall cost of CO₂ sequestration and reducing the huge energy requirements to accelerate the carbonation reaction. This study explores a number of carbonation methods, parameters that control the process and future potential applications of carbonated products.

     

Ecotoxicological effects of microplastics on biota: a review

The ubiquitous presence of microplastics in the environment has drawn the attention of ecotoxicologists on its safety and toxicity. Sources of microplastics in the environment include disintegration of larger plastic items (secondary microplastics), personal care products like liquid soap, exfoliating scrubbers, and cleaning supplies etc. Indiscriminate usage of plastics and its poor waste disposal management pose serious concern on ecosystem quality at global level. The present review focused on the ecological impact of microplastics on biota at different trophic levels, its uptake, accumulation, and excretion etc., and its plausible mechanistic toxicity with risk assessment approaches. Existing scientific evidence shows that microplastics exposure triggers a wide variety of toxic insult from feeding disruption to reproductive performance, physical ingestion, disturbances in energy metabolism, changes in liver physiology, synergistic and/ or antagonistic action of other hydrophobic organic contaminants etc. from lower to higher trophics. Thus, microplastic accumulation and its associated adverse effects make it mandatory to go in for risk assessment and legislative action. Subsequent research priorities, agenda, and key issues to be addressed are also acknowledged in the present review.