Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.     

Regionalization based on spatial and seasonal variation in ground-level ozone concentrations across China

Owing to the vast territory of China and strong regional characteristic of ozone pollution,it's desirable for policy makers to have a targeted and prioritized regulation and ozone pollution control strategy in China based on scientific evidences. It's important to assess its current pollution status as well as spatial and temporal variation patterns across China.Recent advances of national monitoring networks provide an opportunity to insight the actions of ozone pollution. Here, we present rotated empirical orthogonal function(REOF)analysis that was used on studying the spatiotemporal characteristics of daily ozone concentrations. Based on results of REOF analysis in pollution seasons for 3 years' observations, twelve regions with clear patterns were identified in China. The patterns of temporal variation of ozone in each region were separated well and different from each other, reflecting local meteorological, photochemical or pollution features. A rising trend in annual averaged Eight-hour Average Ozone Concentrations(O_3-8 hr) from 2014 to 2016 was observed for all regions, except for the Tibetan Plateau. The mean values of annual and 90 percentile concentrations for all 338 cities were 82.6 ± 14.6 and 133.9 ± 25.8 μg/m~3,respectively, in 2015. The regionalization results of ozone were found to be influenced greatly by terrain features, indicating significant terrain and landform effects on ozone spatial correlations. Among 12 regions, North China Plain, Huanghuai Plain, Central Yangtze River Plain, Pearl River Delta and Sichuan Basin were realized as priority regions for mitigation strategies, due to their higher ozone concentrations and dense population.     

水环境综合整治工程存在的风险因素分析研究

水环境综合整治工程存在的风险因素主要有财务风险、造价预测偏离风险、征地困难风险、施工事故风险以及后期质量可靠性风险等,根据风险因素构建评价解释变量和控制变量模型,结合内部控制和信息披露方法进行风险预测评估,采用分组样本检验方法进行水环境综合整治工程风险因素方法,采用T检验方法进行水环境质量可靠性检验,实现风险有效评估和预防。通过实证分析方法进行模板数据分析,提高对水环境综合整治工程存在的风险因素的定量评估能力。     

爆炸螺栓分离对热防护系统冲击响应分析

目的考察在爆炸螺栓分离过程中,作用在TPS(热防护系统)上的冲击响应是否会导致其破坏,从而影响航天器飞行安全,对过程进行数值仿真分析。方法提出四阶段仿真方案,基于MSC.Dytran软件,采用流固耦合方法对爆炸螺栓分离过程进行动力学仿真;根据单个爆炸螺栓地面分离试验的结构进行建模和分析,获取结构响应曲线;再根据实测的冲击响应数据,对爆炸过程中炸药及JWL方程的参数等设置进行调整,获取准确爆炸螺栓的分析模型;最后应用于对真实结构中TPS(热防护系统)在分离过程里受爆炸螺栓冲击响应的动力学分析与评估。结果通过参数调整,获得的仿真模型与爆炸螺栓地面分离试验实测结果一致,证明了仿真模型的有效性和四阶段仿真方案的可行性。结论提取的真实结构爆炸螺栓分离过程中作用在TPS(热防护结构)上的最大加速度响应曲线,可用于指导TPS(热防护系统)的设计。     

重庆九龙坡城区和城郊大气污染物浓度特征研究

为了解重庆市九龙坡区城区和城郊大气污染物浓度特征,分析了城区和城郊国控空气站点2014年3月~2015年2月典型污染物的浓度变化。结果表明,除O_3表现出夏高冬低的季节变化趋势外,其它污染物均表现出冬高夏低的季节变化趋势。PM_(2.5)污染最严重,城区和郊区日均值超标率分别为31.4%和33.4%。城区和城郊的PM_(2.5)浓度之间没有显著性差异(p0.05),城郊O_3浓度显著高于城区(p0.01),NO_2、SO_2、CO和PM_(10)则是城区显著高于城郊(p0.01)。     

铝合金的实验室盐雾试验腐蚀行为图像特征提取

目的提取铝合金材料在盐雾箱试验中可以表征腐蚀程度的表面形貌图像特征量。方法首先,对采集于表面化学清洗过的试样原始图像进行图像增强等预处理,突出腐蚀部位;其次,基于数字图像处理的分形和小波分解方法提取出分形维数和小波能量特征值。结果与以质量损失量为基础的腐蚀深度特征值进行相关性对比,基于图像分析的特征提取法的准确度和精度比较高。结论该方法可以应用于对试样的腐蚀程度进行定性和定量分析,判断并预测试样的腐蚀速度。     

环境升温过程对常温固化环氧树脂热力学性能的影响

目的提高常温固化环氧树脂体系的高温使用性能。方法采用常温固化剂T31、中温固化剂IPDA以及高温固化剂DDM作为混合固化剂,对E-44型和AG-80型混合环氧树脂体系进行常温固化反应,并分析环境升温过程对固化物热力学性能的影响。通过DMA分析、热变形测量、固化度测试,分别评价室温固化环氧树脂在环境升温过程前后的玻璃化转变温度、热变形量及体系内部的固化反应程度变化,并通过吸水率测试和弯曲强度测试对玻璃纤维布增强常温固化环氧树脂基复合材料的耐湿热性能以及高温条件下的力学性能进行分析。结果环氧树脂常温固化物的tg为85.21℃,经1.5℃/min的平均升温速率加热至90℃之后,该环境升温过程使固化物的固化度增大至92%以上,tg增长为132.06℃的同时热变形温度增大。其复合材料耐湿热性能提高,且100℃时弯曲强度的保持率为65%,对于加热至120℃的环境升温过程,固化物的固化度接近96%,tg增长为144.45℃的同时热变形温度进一步提高,其复合材料耐湿热性能改善程度更加明显,且130℃时弯曲强度保持率仍接近60%。结论常温、中温、高温混合固化剂的合理复配有助于环氧树脂体系在环境升温变化的诱导条件下发生梯度式固化反应,使体系内部的交联固化程度迅速升至较高水平,可以有效提高其玻璃化转变温度,显著改善常温固化环氧树脂体系在高温条件下的热力学性能。     

垃圾填埋场渗出液中有害成分的研究

研究垃圾填埋场渗出液中的有害成分。渗出液样品用适当的方法处理后 ,用气相色谱 -质谱联用方法和原子发射光谱法进行定性分析。然后用原子吸收分光光度法和反相高效液相色谱法定量测定样品中微量的 Cu、Zn、Pb、Cr、Cd、Hg、苯酚、对甲苯酚、萘、蒽     

内蒙古某灌域表层土壤六氯环己烷空间分布特征及影响因素

为修复灌区内土壤有机氯农药污染，降低六氯环己烷对土壤环境的危害，对内蒙古某灌域表层土壤进行采样，利用气相色谱测定50个土壤样品中六氯环己烷及其异构体的含量，并利用ArcGIS空间分析技术确定表层土壤中六氯环己烷的分布状况。样本中六氯环己烷的检出率为96%，各样本中六氯环己烷的浓度范围为未检出~23.0 ng/g，平均浓度为4.4 ng/g。4种异构体含量平均值顺序为γ-六氯环己烷>δ-六氯环己烷>β-六氯环己烷>α-六氯环己烷。灌域东北部和西南部残留浓度较高，并由这2个方向向中部地区逐渐递减，表层土壤中的六氯环己烷分布受土壤黏粒量、不同种植种类和灌溉水源的影响较大。虽受人类耕作的影响，但表层土壤中的六氯环己烷污染水平相对较低。     

上海汽车制造业涂装废气VOCs排放特征

于2015年10月对上海市嘉定区4家(A、B、C、D)汽车制造企业涂装废气ρ(VOCs)和组成特征进行了调查分析。结果表明,A、B、C、D厂涂装废气排放口ρ(VOCs)总为0. 743～6. 11 mg/m~3,主要检出物和最高检出值分别为:A厂二甲苯2. 06 mg/m~3、B厂二甲苯0. 578 mg/m~3、C厂甲苯2. 59 mg/m~3、D厂庚烷0. 274 mg/m~3;芳香烃类是A、B、C厂排放比例最高的VOCs组分,烷烃类是D厂排放比例最高的VOCs组分。指出,原、辅料种类影响排放物的主要成分,废气处理工艺类型影响排放物主要成分和浓度。