Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs

While the concepts of remanufacturing and reverse logistics are gaining popularity in practice, the available literature and theory on strategic decision making in these areas are limited. This paper is designed to address this gap, in particular, for the automotive industry aftermarket. In doing so, the authors reviewed literature pertaining to: customer demand(s), product design and development, cost-benefit analysis of reman, core (i.e., used product) supply management, reman competencies and skills, product life cycle strategies, reman and reverse logistics network design, relationships among key stakeholders, environmental considerations, regulations, and impact of emerging economies. The literature findings along with our experience in working with automotive reman products were used as inputs to guide the formulation of seven major propositions for the strategic factors in decision making within reman. The propositions were then tested through a case study. The case study reconfirmed many of the factors like product life cycle, regulations, etc. from the literature review and also identified new factors like OE customer requirements. Our results provide a foundation for further research for companies that deal with Original Equipment (OE) Sales, Original Equipment Service (OES), as well as Independent Aftermarket (IAM) business in the automotive industry.     

Investigating the impacts of treated effluent discharge on coastal water health (Visakhapatnam,SW coast of Bay of Bengal,India)

The present study investigated the impacts of treated effluent discharge on physicochemical and biological properties of coastal waters from three pharmaceuticals situated along the coast of Visakhapatnam (SW Bay of Bengal). Seawater samples were collected (during the months of December 2013, March 2014 and April 2014) from different sampling locations (Chippada (CHP), Tikkavanipalem (TKP) and Nakkapalli (NKP)) at 0- and 30-m depths within 2-km radius (0.5 km = inner, 1 km = middle and 2 km?=?outer sampling circles) from the marine outfall points. Physicochemical and biological parameters, which differed significantly within the stations, were likely to be influenced by strong seasonality rather than local discharge. Dissolved oxygen variability was tightly coupled with both physical and biological processes. Phytoplankton cell density and total chlorophyll (TChla) concentrations were significantly correlated with dissolved inorganic nutrient concentrations. CHP (December) represented a diatom bloom condition where the highest concentrations of diatom cells, total chlorophyll (TChla), dissolved oxygen coupled with lower zooplankton abundance and low nutrient levels were noticed. The centric diatom, Chaetoceros sp. (>?50%) dominated the phytoplankton community. TKP (March) represented a post-diatom bloom phase with the dominance of Pseudo-nitzschia seriata; zooplankton abundance and nutrient concentrations were minimum. Conversely, NKP (April) represented a warm well-stratified heterotrophic period with maximum zooplankton and minimum phytoplankton density. Dinoflagellate abundance increased at this station. Relatively higher water temperature, salinity, inorganic nutrients coupled with very low concentrations of dissolved oxygen, TChla and pH were observed at this station. Copepods dominated the zooplankton communities in all stations and showed their highest abundance in the innermost sampling circles. Treated effluent discharge did not seem to have any significant impact at these discharge points.     

Methane oxidation in an intensively cropped tropical rice field soil under long-term application of organic and mineral fertilizers

Methane (CH4) oxidation is the only known biological sink process for mitigating atmospheric and terrestrial emissions of CH4, a major greenhouse gas. Methane oxidation in an alluvial soil planted to rice (Oryza sativa L.) under long-term application of organic (compost with a C/N ratio of 21.71), and mineral fertilizers was measured in a field-cum-laboratory incubation study. Oxidation rates were quantified in terms of decrease in the concentration of CH4 in the headspace of incubation vessels and expressed as half-life (t(1)2) values. Methane oxidation rates significantly differed among the treatments and growth stages of the rice crop. Methane oxidation rates were high at the maximum tillering and maturity stages, whereas they were low at grain-filling stage. Methane oxidation was low (t(1)2) = 15.76 d) when provided with low concentration of CH4. On the contrary, high concentration of CH4 resulted in faster oxidation (t(1)2) = 6.67 d), suggesting the predominance of "low affinity oxidation" in rice fields. Methane oxidation was stimulated following the application of mineral fertilizers or compost implicating nutrient limitation as one of the factors affecting the process. Combined application of compost and mineral fertilizer, however, inhibited CH4 oxidation probably due to N immobilization by the added compost. The positive effect of mineral fertilizer on CH4 oxidation rate was evident only at high CH4 concentration (t(1)2 = 4.80 d), while at low CH4 concentration their was considerable suppression (t(1) = 17.60 d). Further research may reveal that long-term application of fertilizers, organic or inorganic, may not inhibit CH4 oxidation.     

BOD-DO modeling and water quality analysis of a waste water outfall off Kochi, west coast of India

Water quality scenarios around an offshore outfall off Kochi were simulated using MIKE21 water quality model, assuming a high Biochemical Oxygen Demand (BOD=50 mg l(-1)) effluent discharge. The discharge is introduced into the model through an outfall located at a distance of 6.8 km from the shore at a depth of 10 m. Three scenarios were simulated with different discharge rates such as 2, 5 and 10 m3 s(-1), with BOD load of 8640, 21,600 and 43,200 kg day(-1) respectively. Model simulations were carried out to estimate the assimilation capacity of the waters off Kochi for the three discharge rates. The results show that for 10 m3 s(-1) effluent discharge, the initial BOD of 50 mg l(-1) reduced to 3.33 mg l(-1) at the outfall after 48 h. High BOD values were confined to an elliptical area of approximately 8 km2 around the outfall. Based on this, the assimilative capacity of the waters off Kochi in terms of BOD can be estimated as 38,000 kg day(-1). It is suggested that offshore waters could be used as a feasible alternative to the Kochi backwaters for the disposal of treated effluent.     

Impact of urbanization on Bellandur Lake, Bangalore--a case study

Lake and river water is the prime source for drinking, irrigation and other domestic purposes. Bellandur Lake is one of the major Lakes of Bangalore city. The addition of effluents from urbanized Bangalore city has changed the characteristics of the Lake from being a natural ecologically healthy Lake to an artificial reservoir of domestic sewage and industrial effluents. The DO of the Bellandur Lake water ranged from 3.8-6.3 mg/l. The Bellandur lake water BOD ranged from 89-99 mg/l due to absorption of pollutants by aquatic flora in lake system. If the present state of affairs continues for long, the Bellandur Lake may soon become an ecologically inactive Lake.     

A rapid and sensitive analytical method for the quantification of residues of endosulfan in blood

A new sensitive analytical procedure has been developed for the determination of residues of endosulfan in human blood samples. The method involves the extraction of residues of endosulfan from blood samples by the addition of 60% sulfuric acid at 10 degrees C, liquid/liquid partitioning by using hexane and acetone mixture (9:1) and quantification by using GC-ECD. Residues of endosulfan in blood samples were quantified as the sum of alpha-endosulfan, beta-endosulfan, endosulfan sulfate and endosulfandiol. The influence of temperature during the extraction has been studied. Recovery experiments were conducted over the concentration range 1.0-50 ng ml(-1) and the relative standard deviation calculated. The method was found to be sufficiently sensitive to quantify the residue of total endosulfan up to the 1.0 ng ml(-1) level. The recovery was 92% with a calculated relative standard deviation of 1.96%. Conversion of endosulfan to endosulfandiol is found to be less than 0.5% under the defined conditions. The method was applied to the analysis of residue contents of endosulfan and its metabolites in blood samples collected from the exposed population. The data obtained has been confirmed by GC-MS-EI in selective ion monitoring (SIM) mode.     

Distribution of PCBs, HCHs and DDTs, and their ecotoxicological implications in Bay of Bengal, India

Analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in seawater and sediment samples collected from six locations along the east coast of India were carried out using High-Resolution Gas Chromatograph with High-Resolution Mass Spectrometer (HRGC-HRMS). Sediment and water from Chennai harbour and Cuddalore fishing harbour contained higher concentration of all the compounds. The highest concentration (6570 pg/g dry weight) of total PCB was found in sediment from Chennai harbour followed by sediments sampled in Chennai (opposite to Cooum River mouth) (505 pg/g), Cuddalore fishing harbour (335 pg/g) and Mandapam (251 pg/g). Concentrations in other locations were two orders of magnitude lower than Chennai harbour. A distinct PCB distribution pattern in sediment was observed between harbours and other locations. Greater concentrations of tetra-, penta- and hexachlorobiphenyls were observed in sediments of harbours and opposite to Cooum river mouth, but in other locations lower chlorinated biphenyls (di, tri and tetra-) were more. In seawater, HCH concentration was greater than DDT, but it was quite opposite in sediments. Elevated levels of DDT in sediment were observed only at highly populated urban locations, reflecting the local usage and input of this pesticide. Based on sediment/water quality criteria/guidelines, some coastal locations of the Bay of Bengal could be designated as being polluted by DDTs and gamma-HCH (lindane), but not by PCBs. This investigation reveals the declining trend on the environmental burden of persistent pesticides in Indian marine environment. Data on the organochlorine concentrations found in this survey can be used as reference levels for future POPs monitoring programme.     

Simultaneous control of Hg0, SO2, and NOx by novel oxidized calcium-based sorbents

Efforts to develop multipollutant control strategies have demonstrated that adding certain oxidants to different classes of Ca-based sorbents leads to a significant improvement in elemental Hg vapor (Hg0), SO2, and NOx removal from simulated flue gases. In the study presented here, two classes of Ca-based sorbents (hydrated limes and silicate compounds) were investigated. A number of oxidizing additives at different concentrations were used in the Ca-based sorbent production process. The Hg0, SO2, and NOx capture capacities of these oxidant-enriched sorbents were evaluated and compared to those of a commercially available activated carbon in bench-scale, fixed-bed, and fluid-bed systems. Calcium-based sorbents prepared with two oxidants, designated C and M, exhibited Hg0 sorption capacities (approximately 100 microg/g) comparable to that of the activated carbon; they showed far superior SO2 and NOx sorption capacities. Preliminary cost estimates for the process utilizing these novel sorbents indicate potential for substantial lowering of control costs, as compared with other processes currently used or considered for control of Hg0, SO2, and NOx emissions from coal-fired boilers. The implications of these findings toward development of multipollutant control technologies and planned pilot and field evaluations of more promising multipollutant sorbents are summarily discussed.