The bangladesh cyclone of 1991: why so many people died

Living with natural disasters has become a way of life in Bangladesh. On the night of 29 April 1991 a severe cyclonic storm, accompanied by tidal surges up to 30 feet high, battered the coastal areas of Bangladesh for 3–4 hours. Thousands of people were killed and property worth billions of dollars was destroyed. After the cyclone, several studies, using epidemiological and anthropological methods, looked at the impact of the cyclone. It was estimated that over 67,000 people lost their lives. Women, children and the elderly were much more at risk and so were those from the socio-economically disadvantaged section of the population. Cyclone shelters were few in relation to need but proved very helpful in saving lives. At least 20 per cent more deaths would have occurred in the absence of these shelters. The article documents impressive improvements in Bangladesh's-ability to cope and makes recommendations for the future.     

Performance of RBC coupled to a polyurethane foam to biodegrade petroleum refinery wastewater

Biological treatment of petroleum refinery wastewater was studied in a rotating biological contactor (RBC) coupled to a polyurethane foam (PUF) as a porous biomass support. The PUF was attached on both sides of biodisks. The biodegradation studies were carried out at varying hydraulic and organic loadings. COD removal efficiency of up to 87% was achieved. The results obtained in terms of biodegradation of COD, NH3-N, phenol, hydrocarbons and suspended solids in this study were compared with those in the literature. The RBC-PUF bioreactor was found to have a better performance than a conventional RBC for the biodegradation of the above mentioned parameters. A higher concentration of active biomass (77 g TVS/m2) was observed in the RBC-PUF as compared to other treatment systems. A linear relationship between COD applied and COD removed was observed for the combined four stage system as well as for the individual stages.     

Governing intensification: the influence of state institutions on smallholder farming strategies in Calakmul,Mexico

ABSTRACT

In forest frontiers, smallholder agrarian livelihoods remain uneasily juxtaposed with conservation interests. Agricultural intensification is often considered a viable means of reconciling competing environmental and livelihood objectives given its potential to concentrate production on less land. However, intensification may have unintended consequences, including loss of resilient agricultural systems. The risks of smallholder agricultural intensification warrant a better understanding of its drivers. This study uses the case of Calakmul, Mexico, to examine the critical role of the state in intensification processes. Drawing on household surveys and key-informant interviews, it traces the linkages between state institutions and local farming practices. Statistical and qualitative analyses reveal how intensification is both incentivized and imposed by prevailing policies, the former via subsidies and the latter via regulations against field rotations. The outcome – increased external inputs and longer cultivation periods between fallows – may undermine the sustainability of smallholders’ agroecosystems, an undesirable consequence amid limited livelihood alternatives.     

Reduction of DNA mismatch repair protein expression in airway epithelial cells of premenopausal women chronically exposed to biomass smoke

Biomass burning is a major source of indoor air pollution in rural India. This study examined whether chronic inhalation of biomass smoke causes change in the DNA mismatch repair (MMR) pathway in the airway cells. For this, airway cells exfoliated in sputum were collected from 72 premenopausal nonsmoking rural women (median age 34 years) who cooked with biomass (wood, dung, crop residues) and 68 control women who cooked with cleaner fuel liquefied petroleum gas (LPG) for the past 5 years or more. The levels of particulate matters with diameters less than 10 and 2.5 μm (PM₁₀ and PM_2.5) in indoor air were measured by real-time aerosol monitor. Benzene exposure was monitored by measuring trans,trans-muconic acid (t,t-MA) in urine by high-performance liquid chromatography with ultraviolet detector. Generation of reactive oxygen species (ROS) and level of superoxide dismutase (SOD) in airway cells were measured by flow cytometry and spectrophotometry, respectively. Immunocytochemical assay revealed lower percentage of airway epithelial cells expressing MMR proteins mutL homolog 1 (MLH1) and mutS homolog 2 (MSH2) in biomass-using women compared to LPG-using controls. Women who cooked with biomass had 6.7 times higher level of urinary t,t-MA, twofold increase in ROS generation, and 31 % depletion of SOD. Indoor air of biomass-using households had three times more particulate matters than that of controls. ROS, urinary t,t-MA, and particulate pollution in biomass-using kitchen had negative correlation, while SOD showed positive correlation with MSH2 and MLH1 expression. It appears that chronic exposure to biomass smoke reduces MMR response in airway epithelial cells, and oxidative stress plays an important role in the process.     

Nanotechnology applications and intellectual property rights in agriculture

Nanotechnology research uses specific properties of materials at the nanoscale to develop improved materials, devices, systems and therapeutics. There is a risk of overlapping patent claims and lack of distinction between nano-based and traditional patents due to the interdisciplinary nature of nanotechnology. There is an increasing trend of granted patents. The World Intellectual Property Organization and World Health Organization, regulatory and policy bodies, are working to make a comprehensive property right regulation for nanotechnology products. The USA, the leader of nanotechnology products, has made guidelines to make patent search easier for nano-based products. The European Patent Office has also created a new classification for nano-based inventions. Here we review the status of intellectual property rights protection of nanomaterial, environmental implications and application of nanotechnology in agriculture.     

Development of novel absorbents for CO2 capture from blast furnace gas

In order to establish energy-saving technology for CO₂ capture from blast furnace gas, novel absorbents were developed in the laboratory and evaluated at a 1 t_CO2/d test plant. At first, CO₂ absorption and desorption behaviors of single-component amine solvents for simulated blast furnace gas (CO₂/N₂ = 20%/80%) were investigated through a screening test using a small scrubbing bottle. These amine solvents were additionally analyzed using nuclear magnetic resonance (¹³C NMR) spectroscopy and reaction calorimetry. The results of the laboratory experiments showed that there was a trade-off between absorption rate and enthalpy of absorption but some absorbents had unique features. For example, 2-isopropylaminoethanol (IPAE) had high absorption rate and small enthalpy of absorption. Then, new IPAE-based amine solvents (RITE solvents: RITE-A and RITE-B) were formulated and evaluated at the 1 t_CO2/d test plant. CO₂ regeneration energies of the RITE solvents were 3.3 and 3.1 GJ/t_CO2, respectively. With certain process conditions and plant specifications optimized, RITE-B was estimated to have the potential to achieve 2.5 GJ/t_CO2.     

Occurrence of heavy metals in fish: a study for impact assessment in industry prone aquatic environment around Kolkata in India

A study was conducted during November 2005-October 2006 for determining the heavy metal contamination in surface water and sediments and giving prime thrust to determine the heavy metal concentrations fish samples collected from various points of the river Ganga at different time interval. Fish samples (viz., Channa marulius and Aorichthys seengala) were analyzed for heavy metals using standard laboratory procedures by AAS method. In impact points the annual average values for Cu, Cr, Cd, Pb and Zn were 0.15, 0.04, 0.03, 0.02 and 0.29 ppm, respectively. The concentrations of heavy metals in the riverine water collected from middle point had the order Zn > Cu > Cr > Cd > Pb. The data indicated that copper was maximally accumulated in the riverine sediments whereas least annual average concentration was obtained for lead. The trend of accumulation suggested deposition was maximum for zinc and minimum for cadmium in the muscles of both fish species. Only zinc has shown some significant seasonal variation in relation to metal deposition in fish muscles (minimum in monsoon and maximum in summer). The heavy metal contamination to fish may be due to indiscriminate discharge of polluted and untreated sewage sludge to the river. The heavy metal contents in fish at some places are alarming.     

Artificial neural network (ANN) modeling of adsorption of methylene blue by NaOH-modified rice husk in a fixed-bed column system

In this study, rice husk was modified with NaOH and used as adsorbent for dynamic adsorption of methylene blue (MB) from aqueous solutions. Continuous removal of MB from aqueous solutions was studied in a laboratory scale fixed-bed column packed with NaOH-modified rice husk (NMRH). Effect of different flow rates and bed heights on the column breakthrough performance was investigated. In order to determine the most suitable model for describing the adsorption kinetics of MB in the fixed-bed column system, the bed depth service time (BDST) model as well as the Thomas model was fitted to the experimental data. An artificial neural network (ANN)-based model was also developed for describing the dynamic dye adsorption process. An extensive error analysis was carried out between experimental data and data predicted by the models by using the following error functions: correlation coefficient (R ²), average relative error, sum of the absolute error and Chi-square statistic test (χ ²). Results show that with increasing bed height and decreasing flow rate, the breakthrough time was delayed. All the error functions yielded minimum values for the ANN model than the traditional models (BDST and Thomas), suggesting that the ANN model is the most suitable model to describe the fixed-bed adsorption of MB by NMRH. It is also more rational and reliable to interpret dynamic dye adsorption data through a process of ANN architecture.     

Uncertainty characterization approaches for risk assessment of DBPs in drinking water: A review

The management of risk from disinfection by-products (DBPs) in drinking water has become a critical issue over the last three decades. The areas of concern for risk management studies include (i) human health risk from DBPs, (ii) disinfection performance, (iii) technical feasibility (maintenance, management and operation) of treatment and disinfection approaches, and (iv) cost. Human health risk assessment is typically considered to be the most important phase of the risk-based decision-making or risk management studies. The factors associated with health risk assessment and other attributes are generally prone to considerable uncertainty. Probabilistic and non-probabilistic approaches have both been employed to characterize uncertainties associated with risk assessment. The probabilistic approaches include sampling-based methods (typically Monte Carlo simulation and stratified sampling) and asymptotic (approximate) reliability analysis (first- and second-order reliability methods). Non-probabilistic approaches include interval analysis, fuzzy set theory and possibility theory. However, it is generally accepted that no single method is suitable for the entire spectrum of problems encountered in uncertainty analyses for risk assessment. Each method has its own set of advantages and limitations. In this paper, the feasibility and limitations of different uncertainty analysis approaches are outlined for risk management studies of drinking water supply systems. The findings assist in the selection of suitable approaches for uncertainty analysis in risk management studies associated with DBPs and human health risk.