Heavy metals removal from aqueous solution using carbonaceous K_2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K_2S. Raw coal was mixed with K_2S powder and then heated at 800℃ for 30 min in nitrogen to produce K_2S char. The sulfur content and form in K_2S char were determined, and the ability of K_2S char to adsorb Zn~(2+), Cd~(2+) and Pb~(2+) was examined. The K_2S impregnation was effective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K_2S char was higher than those of raw coal and pyrolysis char. The Zn~(2+) removal in 2.4 mmol/L of Zn~(2+) solution by K_2S char was higher than raw coal with the removal rate of 100%. K_2S char adsorbed Pb~(2+) and Cd~(2+) in 24 mmol/L of Pb~(2+) and Cd~(2+) solution with the removal rate of 97 % and 35 %, respectively. The elution extents of adsorbed Pb~(2+) and Cd~(2+) were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an effective adsorbent for heavy metal ions was prepared from coal using K_2S sulfur impregnation, and that the adsorbed metals were strongly retained in K_2S char.     

Soil frost control: agricultural adaptation to climate variability in a cold region of Japan

In the northernmost region of Japan (Hokkaido Island), earlier onsets of thick snowcover in recent years (post 1980) have reduced the penetration depth of soil frost, resulting in over-winter survival of unharvested small potato (Solanum tuberosum) tubers that emerge as weeds in the spring in rotation crop fields. To prevent the occurrence of potato weeds, a method was developed to manipulate soil-frost depths by artificially controlling snowcover thickness, guided by a simple numerical model that simulates soil freezing-thawing processes using daily mean air temperature and snowcover thinckness as input variables. The method involves removal of snowcover to expose the soil surface in the beginning of winter until the soil freezes to a sufficient depth. After that time, snow is deposited back or allowed to accumulate naturally to prevent further penetration of frost, which may cause undesirable delay in the seeding of spring crops. Field trials indicated that the model predicted frost depths within several centimeters of observed values, when measured temperature and snowcover thickness were used as model input. Based on the field and laboratory data, a soil temperature of −3°C is necessary for complete elimination of potato tubers. To achieve this temperature in potato-burial zones without causing excessive freezing, an optimal frost depth is 0.3 to 0.4 m. The method is being adopted by progressive potato producers in the region, who use tractor-mounted snow ploughs to manipulate snowcover over a large scale. This is an emerging new technology for agricultural adaptation to climate variability.     

Potential increase in mating frequency of queens in feral colonies of Bombus terrestris introduced into Japan

With the exception of several species, bumblebees are monandrous. We examined mating frequency in feral colonies of the introduced bumblebee Bombus terrestris in Japan. Using microsatellite markers, genotyping of sperm DNA stored in the spermatheca of nine queens detected multiple insemination paternities in one queen; the others were singly mated. The average effective paternity frequency estimated from the genotypes of queens and workers was 1.23; that estimated from the workers’ genotype alone was 2.12. These values were greater than those of laboratory-reared colonies in the native ranges of B. terrestris. The genotypes of one or two workers did not match those of their queens or showed paternities different from those of their nestmates; this may have arisen from either queen takeover or drifting of workers. These alien workers were responsible for the heterogeneous genotype distribution within each B. terrestris colony, resulting in higher estimates of paternity frequency than of insemination frequency. The high mating frequency of introduced B. terrestris may have occurred by artificial selection through mass breeding for commercialization. Moreover, polyandrous queens may be selectively advantageous, because reproduction by such queens is less likely to be disturbed by interspecific mating than that by monandrous queens.     

Contribution of metabolites to mutagenicity during anaerobic biodegradation of fenitrothion

The contribution of fenitrothion and its microbial metabolites to the mutagenicity of a fenitrothion-containing solution was investigated during anaerobic biodegradation. Although a mixed culture of bacteria obtained from a paddy field degraded fenitrothion and reduced its concentration from 4.6 to 0.1 mg/l in 6 days, the indirect mutagenicity of the solution in Salmonella strain YG1029 increased. This increase was found to be partially due to amino-fenitrothion generated during the biodegradation. In addition, other unidentified metabolites contributed to the mutagenicity. In contrast, the indirect mutagenicity in strain YG1042, which was initially large because of fenitrothion, then decreased, and increased again. This increase in mutagenicity was also due to amino-fenitrothion and other unidentified metabolites. The mutagenicity in strains YG1029 and YG1042 decreased after day 6. The greatest contribution of amino-fenitrothion to the mutagenicity was calculated to be 73% and 61% in YG1029 and YG1042 on day 3 of incubation, respectively. That of unidentified metabolites was calculated at 49% and 61% on day 20, respectively. Therefore, because not all the toxic metabolites of a compound can be identified, it is important to evaluate the toxicity of a whole solution in a bioassay such as the Ames assay rather than deducing the toxicity of the solution from the combined toxicities of known metabolites.     

Fate of mutagenicity produced during anaerobic biodegradation of the herbicide chlornitrofen (CNP)

The mutagenicity of chlornitrofen (CNP)-containing solutions has been reported to increase during anaerobic biodegradation. In the present study, the fate of this increased mutagenicity under subsequent aerobic and anaerobic incubation conditions was investigated using two Salmonella tester strains, YG 1024 (a frameshift-detecting strain) and YG 1029 (a base-pair-substitution-detecting strain). Mutagenicity for both YG 1024 and YG 1029 strains increased during nine-day anaerobic biodegradation. During subsequent anaerobic incubation, the increased mutagenicity decreased gradually for YG 1029 but did not change significantly for YG 1024. By contrast, the increased mutagenicity decreased rapidly after the conversion to aerobic incubation for both YG 1024 and YG 1029 strains. The rapid decrease in mutagenicity during aerobic incubation was due to decreases, not only in an identified mutagenic metabolite (CNP-amino) but also in unidentified mutagenic metabolites.     

Antimony in municipal waste.

Antimony content in municipal waste was studied. Sampled municipal waste was dried, crushed and analyzed. Antimony determinations were performed by Kjeldahl decomposition--batch hydride generation spectrometry and neutron activation analysis. Overall content of antimony in waste was 40-50 g/t raw waste. It was estimated than 20% of the annual production of antimony was discarded as municipal waste in Japan. Leaching of antimony from antimony-added materials may occur, because "small tips" involved considerable amounts of antimony.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

Influence of transportation and pumping on the properties of concrete with large amount of copper slag fine aggregate in actual construction of port and harbor structures

Journal of Material Cycles and Waste Management - Copper slag fine aggregate (CUS) is 30% denser than normal aggregate is an effective material for port and harbor structures demanding high-density...     

Sorption-desorption of atrazine and diuron in soils from southern Brazil

The objective of this study was to investigate the behavior of sorption and desorption of the herbicides atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) and diuron [3-(3,4-dichlorophenyl)-1,1-dimethyleurea] in soil samples from a typical lithosequence located in the municipality of Mamborê (PR), southern Brazil. Five concentrations of 14C-atrazine and 14C-diuron were used for both herbicides (0.48, 0.96, 1.92, 3.84, and 7.69 mg L(-1)). Sorption of both herbicides correlated positively with the organic carbon and clay content of the soil samples. Sorption isotherms were well described by the Freundlich model. The slope values of the isotherm (N) ranged from 0.84 to 0.90 (atrazine) and from 0.75 to 0.79 (diuron) for the lithosequence samples. Sorption of diuron was high regardless of the soil texture or the concentration added. The desorption isotherms for atrazine and diuron showed good fit to the Freundlich equation (R2 >or= 0,87). Atrazine slope values for the desorption isotherms were similar for the different concentrations and were much lower than those observed for the sorption isotherms. Significant hysteresis was observed in the herbicide desorption. When the two herbicides were compared, it was found that diuron (N = 0.06-0.22) presented more pronounced hysteresis than atrazine. The results showed that, quantitatively, a greater atrazine fraction applied to these soils remains available to be leached in the soil profile, as compared to diuron.