Balancing durability and environmental impact in concrete combining low-grade recycled aggregates and mineral admixtures

This paper investigated the effect of various amounts of low-grade recycled aggregates in concrete containing mineral admixtures at three different water-binder ratios on mechanical and environmental performance. The balance between durability and environmental impact for a given strength level similar to normal-use concrete was also examined using analytic hierarchy process. Results showed that increasing the water-binder ratio and volume of recycled aggregates reduced compressive strength and increased air permeability and drying shrinkage relative to normal aggregates. However, compared to normal-use concrete similar or better performance could be achieved, which was attributed to improvement of low-grade recycled aggregate performance when combined with fly ash. Similarly, CO₂ emissions and volume of raw materials were lower than the normal-use concrete for all mixes. Concrete mixes with low air permeability and low CO₂ footprint had the best balance of durability and environmental impact, as decreasing raw material volume tended to more greatly reduce durability.     

Evaluating the technical efficiencies of fishing vessels to achieve effective management of overexploited fisheries

Global marine capture fisheries are undergoing serious stress, with overfishing as one of the major problems. In order to mitigate the overexploitation of capture fisheries, government regulation or fisheries management is necessary. Among various management approaches, vessel quantity control is being widely employed. To achieve effective governance of fisheries, the technical efficiency (TE) issue needs to be considered in the implementation of vessel quantity control. Using the Pacific saury (Cololabis saira) stick-held dip net fishery in Japan as a case study, this paper estimated the TE of sampled fishing vessels and explored the possible factors affecting the gap in efficiency. This paper aims to provide suggestions for a better implementation of vessel quantity control in global Pacific saury fishery, and also to serve as an empirical example of integrating TE analysis into management of overexploited fisheries for achieving satisfactory effects. Results show the TE score of the sampled fishery averaged around 0.7 from 2009 to 2014, and factors concerning owners/skippers’ motivation such as vessel ownership and specialization, vessel tonnage as well as skippers’ age show positive effects on the TE. Our findings in the present work provide important strategies for mitigating overexploitation in fisheries. Conducting technical efficiency analysis of targeted fisheries is a vital issue to be considered for designing and realizing an effective implementation of fisheries management approaches. The large vessels and the enthusiasm of vessel owners/skippers need to be particularly addressed when vessel quantity limit is considered to mitigate the problem of overfishing.     

Preparation of Galactomannan-Based Materials Compatibilized with Ionic Liquids

This paper reports the preparation of galactomannan/ionic liquid composite materials from the corresponding ion gels. Three kinds of galactomannans, that is, fenugreek gum (FG), guar gum (GG), and locust bean gum (LBG) and an ionic liquid of 1-butyl-3-methylimidazolium chloride (BMIMCl) were used. When the galactomannan/BMIMCl gels were immersed in ethanol, followed by dryness under reduced pressure, the galactomannan/BMIMCl composite materials were obtained. The crystalline structures of galactomannans in the materials were evaluated by the powder X-ray diffraction measurement. The mechanical property of the FG/BMIMCl composite material under compressive mode was superior compared with the GG and LBG/BMIMCl composite materials. Then, FG films compatibilized with polymeric ionic liquids (PILs) were also prepared by in situ radical polymerization of polymerizable ionic liquids, 1-(3-acryloyloxypropyl)-3-vinylimidazolium bromide and 1-methyl-3-vinylbenzylimidazolium chloride by AIBN in mixtures of FG with BMIMCl. The mechanical properties of the resulting films were affected by the FG/PIL ratios as well as the unit ratios in PILs.     

Quantitative analysis of perfluorinated chemicals in media for in vitro fertilization and related samples

The actual standard in vitro fertilization (IVF) protocol recommends an overnight gamete co-incubation. All of the culture media used for human IVF are supplemented with serum or albumin. In the present study, we determined the concentrations of perfluorinated chemicals (PFCs) in IVF media (IVFM) and related samples by liquid chromatography with tandem mass spectrometry (LC/MS/MS). The results indicated that the concentrations of PFOS and PFOA in the protein source were higher than those in the IVFM samples. Compared with human plasma concentrations of PFCs, PFCs in all of the IVFM samples, such as PFBS, PFHxS and PFOA, were either not detected or present at only trace levels, even when protein source was added. LC/MS/MS could be used to determine PFCs in IVFM samples in future studies of the effects of PFC exposure on intrauterine insemination.     

Municipal solid waste composition and food loss reduction in Kyoto City

For 35 years, Kyoto City has conducted detailed household waste composition surveys under the guidance of Kyoto University by dividing household waste into approximately 400 categories. In addition, the city has conducted detailed composition surveys of commercial waste generated by businesses. These surveys show that food loss accounts for approximately 40% of total waste, of which leftovers and untouched food account for about 40% in both households and business facilities. Consequently, the annual generation of household and commercial food loss is estimated at about 30,000 tons. Various efforts have been made to reduce waste, including food loss, but further reduction in environmental burden is needed. Thus, Kyoto City revised the ordinance for waste reduction, and in March 2015, formulated a new municipal waste management plan. The plan not only includes the 2Rs (reduce, reuse), but also, for the first time in Japan, sets quantitative targets for reducing food loss. Kyoto City must ensure that the necessary waste reduction measures are clearly explained to the residents and business operators. To ensure that this plan is successful, it is important to clarify concrete actions that residents and business operators should implement, along with their effects.     

Assessment of environmental variations caused by a very large floating structure in a semi-closed bay

To assess the environmental impacts of large floating structures, various physical, chemical, and biological parameters were measured. The current and water quality were monitored around a prototype floating structure called the Phase-II Mega-Float model (MF-II model), which was moored off Yokosuka in Tokyo Bay during the period 1999–2000. The effects of the MF-II model on the condition of the physical environment, e.g., the direction and flow rate of water currents and the stratification structure, were negligible. Analysis of water quality showed that the concentrations of chlorophyll a and nutrients only varied just below the MF-II model. However, such variations were localized to within 5 m below the MF-II model since the waters were exchanged because of the tidal current. The minor changes in water quality are attributable to the impedance of photosynthesis due to the sea-covering effect and the activities of sessile organisms fouling the bottom surface of the MF-II model.     

Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.