Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.     

Synthesis of Short-chain-length/Medium-chain-length Polyhydroxyalkanoate (PHA) Copolymers in Peroxisome of the Transgenic Arabidopsis Thaliana Harboring the PHA Synthase Gene from Pseudomonas sp. 61-3

In this paper, the photosynthetic production of short-chain-length/medium-chain-length polyhydroxyalkanoate (PHA) copolymers is reported. The wild-type and highly active doubly mutated PHA synthase 1 (S325T/Q481K, abbreviated ST/QK) genes from Pseudomonas sp. 61-3 were introduced into Arabidopsis thaliana. Peroxisome targeting signal 1 (PTS1) was used to target PHA synthases into the peroxisome to synthesize PHA from the intermediates of the β-oxidation pathway. The transgenic Arabidopsis produced PHA copolymers consisting of 40–57 mol% 3-hydroxybutyrate, 21–49 mol% 3-hydroxyvalerate, 8–18 mol% 3-hydroxyhexanoate, and 2–8 mol% 3-hydroxyoctanoate. The maximum PHA contents were 220μ g/g cell dry weight (cdw) in leaves, and 36μ g/g cdw in stems, respectively. The expression of the ST/QK mutated PHA synthase in leaves gene did not lead to significant difference in PHA content and monomer composition of PHAs, compared to the wild-type PHA synthase gene, suggesting that the supply of monomers may be a rate-determining step of PHA biosynthesis in the peroxisome. However, in stems, there were significant differences dependent on whether the wild-type or ST/QK mutated PHA synthase was expressed. These results suggest that tissue-specific monomer availability is important in determining the final mol% composition of PHA copolymers produced by the peroxisome in plants.     

Research to develop a predicting system of mammalian subacute toxicity (3) construction of a predictive toxicokinetics model

A new predictive toxicokinetics model was developed to estimate subacute toxicity (target organs, severity, etc.) of non-congeneric industrial chemicals, where the chemical structures and physico-chemical properties are only available. Thus, a physiological pharmacokinetics model, which consists of blood, liver, kidney (these were experimentally found as major toxicological targets), muscle and fat compartments , was established to simulate the chemical concentrations in organs/tissues with pharmacokinetic parameters by means of Runge-Kutta-Gill algorithm. The pliarmacokinetic parameters, i.e. absorption rate, absorption ratio, hepatic extraction ratio of metabolism and renal clearance were calculated by using separately established Quantitative Structure-Pharmacokinetics Relationship equations. The developed predictive model was then applied to simulations of 43 non-congeneric industrial chemicals. The chemical concentrations in organs/tissues after single oral administration were simulated, and their maximum concentrations (Cmax's) and area tinder the concentration-time curves (AUC's) were calculated.Fast Inverse Laplace Transform was newly applied for the purpose of simulation of 28-day repeated dose toxicity.Simulated concentrations of 28 days repeated dose were, however, found to be the same as those of simple repetitions of a single administration per day because of the short half-lives of non-congeneric industrial chemicals.A comparison of subacute toxicity data with Cmax's and AUC's in a single dose scenario suggested that the organs/tissues with relatively high concentrations of tested chemical substances were the most sensitive targets within a chemical.Chemical concentrations in liver, for instance, were correlated with the severity of hepatotoxicity among the chemicals. It was also suggested that to improve and widen the present approach, data of metabolite and reactivity of non-congeneric industrial chemicals to organs/tissues, receptors, etc. should be incorporated into the model.     

Heavy metals removal from aqueous solution using carbonaceous K_2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K_2S. Raw coal was mixed with K_2S powder and then heated at 800℃ for 30 min in nitrogen to produce K_2S char. The sulfur content and form in K_2S char were determined, and the ability of K_2S char to adsorb Zn~(2+), Cd~(2+) and Pb~(2+) was examined. The K_2S impregnation was effective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K_2S char was higher than those of raw coal and pyrolysis char. The Zn~(2+) removal in 2.4 mmol/L of Zn~(2+) solution by K_2S char was higher than raw coal with the removal rate of 100%. K_2S char adsorbed Pb~(2+) and Cd~(2+) in 24 mmol/L of Pb~(2+) and Cd~(2+) solution with the removal rate of 97 % and 35 %, respectively. The elution extents of adsorbed Pb~(2+) and Cd~(2+) were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an effective adsorbent for heavy metal ions was prepared from coal using K_2S sulfur impregnation, and that the adsorbed metals were strongly retained in K_2S char.     

Urinary concentrations of organophosphorus insecticide metabolites in Japanese workers

A recent development in analytical chemistry has enabled us to monitor systemic organophosphorus insecticide (OP) exposure at individual levels. At present, however, limited data are currently available on urinary OP metabolite levels worldwide. The purpose of this study was to assess urinary dialkylphosphate (DAP) concentrations in Japanese workers. Urine samples were collected in both summer and winter from 339 Japanese adults who worked as food distributors (FDs, n = 164), apple farmers (AFs, n = 147) and pest control operators (PCOs, n = 28). DAPs were measured by gas chromatography-mass spectrometry after derivatization with pentafluorobenzylbromide. Dimethylphosphate (DMP), diethylphosphate (DEP), dimethylthiophosphate (DMTP) and diethylthiophosphate (DETP) were detected in the urine of over 87% of the studied populations in both seasons. The geometric mean values of total DAPs (nmol g⁻¹ creatinine), DMP, DMTP, DEP and DETP (μg g⁻¹ creatinine) in summer and winter were 106.7 and 98.3, 7.0 and 3.8, 3.4 and 4.5, 0.8 and 1.5, and 0.3 and 0.2 for the FDs, 440.8 and 197.7, 33.1 and 10.8, 10.1 and 5.8, 4.2 and 4.7 and 1.6 and 0.8 for the AFs, and 473.4 and 284.6, 28.9 and 22.2, 17.6 and 4.6, 3.5 and 4.4, and 0.5 and 0.6 for the PCOs, respectively, thereby revealing significantly higher concentrations in AFs and PCOs groups than in the FDs in both seasons except for winter DMTP. These DAP concentrations were approximately the same or at lower levels compared with those reported in the previous literature. This is one of the first studies to demonstrate urinary DAP concentrations in Japanese adults.     

Nitrogen and phosphorus removal for swine wastewater by ammonium crystallization and intermittent aeration process

Abstract

A process on crystallized precipitation of ammonium by adding magnesium salt and phosphate was carried out to improve C/N ratio in swine wastewater. After completion of crystallized precipitation of ammonium, an intermittent aeration process with aeration and non‐aeration periods alternated at interval of 1:1 hr day^‐1 is used for the improved swine wastewater (T‐N/BOD=0.14: BOD=8200 mg/liter and T‐N=1166 mg/liter). The results obtained from the experiment show that the removal ratios of T‐N and NH₄‐N are 91% and 99%, respectively. T‐P is not removed, while the removal ratio of PO₄‐P is 60% as 3% of CaCl₂ liquid is added. The results also indicate that dilution with water is effective to improve the removal of phosphorus even if raw swine wastewater contains high concentrations of T‐N, T‐P, BOD, and TOC.     

Material conversion from paper sludge ash in NaOH solution to synthesize adsorbent for removal of Pb^2＋, NH^4＋ and PO4^3- from aqueous solution

Material conversion from paper sludge ash (PSA) in NaOH solution was attempted to synthesize the adsorbent for removal of inorganic pollutants, such as Pb2+, NH4 + and PO4 3?? from aqueous solution. PSA of 0.5 g was added into 10 mL of 3 mol/L NaOH solution, and then heated at 80, 120, and 160°C for 6–48 hr to obtain the product. PSA mainly composed of two crystalline phases, gehlenite (Ca2Al2SiO7) and anorthite (CaAl2Si2O8), and amorphous phase. Hydroxysodalite (Na6Al6Si6O24 8H2O) was formed at 80°C, and anorthite dissolved, whereas gehlenite remained una ected. Katoite (Ca3Al2SiO4(OH)8) was formed over 120°C, and hydroxycancrinite (Na8(OH)2Al6Si6O24 2H2O) was formed at 160°C, due to the dissolution of both gehlenite and anorthite. Specific surface areas of the products were almost same and were higher than that of raw ash. Cation exchange capacities (CECs) of the products were also higher than that of raw ash, and CEC obtained at lower temperature was higher. Removal abilities of products for Pb2+, NH4 +, and PO4 3?? were higher than that of raw ash.With increasing reaction temperature, the removal e ciencies of Pb2+ and NH4 + decreased due to the decrease of CEC of the product, while removal e ciency for PO4 3?? was almost same. The concentrations of Si and Al in the solution and the crystalline phases in the solid during the reaction explain the formation of the product phases at each temperature.     

淮河流域可持续发展研究的重点问题

以可持续发展的基本理论为指导 ,本研究选定淮河流域为研究的典型区域 ,试图通过对淮河流域社会、经济、资源、环境的系统分析 ,提出实现大河流域可持续发展战略的基本思路与框架     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.