The Role of a Salt Marsh Plant on Trace Metal Bioavailability in Sediments. Estimation By Different Chemical Approaches * (7 pp)

Goal, Scope and Background The presence or absence of vegetation can condition sediment characteristics. The main aim of this work was to investigate the influence of the sea rush Juncus maritimus on metal (Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) availability to organisms living on or in estuarine sediments, from Douro River (NW Portugal), by comparing the characteristics and chemical behaviour of rhizosediments (collected within the plant assemblage) and those of sediment (collected around the plant). In order to evaluate whether and how sediment characteristics condition the role of plants on metal availability, sandy and muddy sediments colonised by J. maritimus were studied in parallel. Methods Metal availability was estimated by enzymatic digestion with pepsin (ED), which may provide an estimate of metal availability to organisms living at estuarine sediments. Nevertheless, since no consensus exists yet on the most suitable methodologies to estimate metal bioavailability in sediments, two more conventional approaches, BCR sequential extraction (SE) and AVS/SEM model, were also used, in parallel, and the information these approaches provided was compared with that provided by ED. Total-recoverable metal contents were determined by atomic absorption spectrophotometry after sediment digestion using a high-pressure microwave system. Results and Discussion Plants could concentrate metals around its roots and rhizomes. In addition, they were capable of oxidizing (release of oxygen by the roots) the anaerobic medium surrounding their roots in muddy sediment (reducing AVS). As sulphide oxidation renders metals (Cd, Cu, Ni, Pb and Zn) into more soluble forms, according to the AVS/SEM model, metals from muddy sites would be more available in rhizosediment than in sediment. The SE approach led to a similar conclusion. Nevertheless, the results provided by ED pointed at opposite conclusion, particularly for Cd and Zn, indicating less availability at rhizosediments than in the surrounding sediment. ED results were interpreted as a consequence of an enrichment of the rhizosediment in organic ligands exuded by the roots or liberated by dead plants. The effect of complexation of metals by organic compounds, which ED could not decompose/dissolve, seemed to overcome that caused by sediment oxidation. In general, a comparison of the information about metal availability by ED, SE, AVS/SEM, showed that it did not always match and in few cases it was even contradictory. Conclusion and Outlook Therefore, a thorough evaluation of the metal availability in sediments requires a combination of different chemical approaches, so as to take into consideration differences in ways of organism exposure (interstitial water and/or ingestion of sediment particles). - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.     

Study of metal fractionation in river sediments. A comparison between kinetic and sequential extraction procedures

The extraction kinetic of trace metals (Cd, Cu, Pb, and Zn) in river sediments by four extraction agents was studied. As extractants ammonium acetate, acetic acid, hydroxylamine and EDTA solutions were assayed. These reagents can leach the metals more or less selectively from several metal compartments of sediments. The metal leaching kinetic model permits classification of the metal species in labile and moderately-labile ones. The combination of two or more non specific reagents permits a high characterisation of metal distribution and leachability. The results obtained with this model in four river sediments were compared with data obtained by the SM&T sequential extraction procedure, in order to characterise the chemical nature of leached metal.     

Effect of alkalinity on the performance of a simulated landfill bioreactor digesting organic solid wastes

This study investigated the effects of alkalinity on the anaerobic treatment of the organic solid wastes collected from the kitchen of Engineering Faculty in Dokuz Eylul University, Izmir, Turkey and the leachate characteristics treated in three simulated landfill anaerobic bioreactors. All of the reactors were operated with leachate recirculation. One reactor was operated without alkalinity addition. The second reactor was operated by the addition of 3 g l-1 d-1 of NaHCO3 alkalinity to the leachate and the third reactor was operated by the addition of 6 g l-1 d-1 NaHCO3 alkalinity to the leachate. After 65 d of anaerobic incubation, it was observed that the chemical oxygen demand (COD), volatile fatty acids (VFA) concentrations, and biochemical oxygen demand to chemical oxygen demand (BOD5/COD) ratios in the leachate samples produced from the alkalinity added reactors were lower than the control reactor while the pH values were higher than the control reactor. The COD values were measured as 18900, 3800 and 2900 mg l-1 while the VFA concentrations were 6900, 1400 and 1290 mg l-1, respectively, in the leachate samples of the control, and reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 after 65 d of anaerobic incubation. The total nitrogen (TN), total phosphorus (TP) and ammonium nitrogen (NH4-N) concentrations in organic solid waste (OSW) significantly reduced in the reactor containing 6 g l-1 NaHCO3 by d 65. The values of pH were 6.54, 7.19 and 7.31, after 65 d of anaerobic incubation, respectively, in the aforementioned reactors results in neutral environmental conditions in alkalinity added reactors. Methane percentage of the control, reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 were 37%, 64% and 65%, respectively, after 65 d of incubation. BOD5/COD ratios of 0.27 and 0.25 were achieved in the 3 and 6 g l-1 NaHCO3 containing reactors, indicating a better OSW stabilization. Alkalinity addition reduced the waste quantity, the organic content of the solid waste and the biodegradation time.     

Spectrophotometric determination of the fungicide captan

A spectrophotometric method for the determination of the fungicide captan has been developed based on its reaction with thiosemicarbazide. The absorbance was measured at 315 nm. The effects of the proportion of water, thiosemicarbazide concentration, pH and temperature on this reaction was studied to select the best chemical conditions. The calibration graph was obtained between 1.2 and 30 ppm and the detection limit is 0.5 ppm. The RSD (n = 10) was 1.34%. Possible interference of various pesticides was examined. The method was applied to the determination of captan in agrochemical formulations. Results agree well with the labelled values and also with results that were obtained by a polarographic method.     

Use of the ouput of a lead risk assessment model to establish soil lead cleanup levels

Three general methods to calculate soil contaminant cleanup levels are assessed: the truncated lognormal approach, Monte Carlo analysis, and the house-by-house approach. When these methods are used together with a lead risk assessment model, they yield estimated soil lead cleanup levels that may be required in an attempt to achieve specified target blood lead levels for a community. The truncated lognormal approach is exemplified by the Society for Environmental Geochemistry and Health (SEGH) model, Monte Carlo analysis is exemplified by the US EPA's LEAD Model, and the house-by-house approach is used with a structural equation model to calculate site-specific soil lead cleanup levels. The various cleanup methods can each be used with any type of lead risk assessment model. Although all examples given here are for lead, the cleanup methods can, in principle, be used as well with risk assessment models for other chemical contaminants to derive contaminant-specific soil cleanup levels.     

Diagnosis of Bloom's syndrome by sister chromatid exchange evaluation in chorionic villus cultures

Cultures of a chorion biopsy taken from a pregnancy at risk of Bloom's syndrome revealed the high sister chromatid exchange frequency diagnostic of this rare disorder. To obtain the result, cultures were grown under standard conditions, with the addition of 10μM 5′;-bromodeoxyuridine for the final 48 h of incubation. This result demonstrates the feasibility of early prenatal diagnosis of Bloom's syndrome.     

Grief and mid-trimester fetal loss

Fetal loss through miscarriage or termination of pregnancy for genetic reasons often provokes the grief of bereavement. This is not fully understood, and the extent of the distress is often underestimated by professionals and family alike. We have examined elements of the normal bereavement process and have found that they may occur in specific and accentuated forms in mid-trimester fetal loss. We discuss our findings in the light of the attachment theory—a psychodynamic model for understanding grief reactions.     

Dorsal shaving affects concentrations of faecal cortisol metabolites in lactating golden hamsters

Breeding of golden hamsters is classically performed at thermal conditions ranging from 20 to 24 °C. However, growing evidence suggests that lactating females suffer from heat stress. We hypothesised that shaving females dorsally to maximise heat dissipation may reduce stress during reproduction. We thus compared faecal cortisol metabolites (FCM) from shaved golden hamster mothers with those from unshaved controls. We observed significantly lower FCM levels in the shaved mothers (F_1,22?=?8.69, p?=?0.0075) pointing to lower stress due to ameliorated heat dissipation over the body surface. In addition, we observed 0.4 °C lower mean subcutaneous body temperatures in the shaved females, although this effect did not reach significance (F_1,22?=?1.86, p?=?0.18). Our results suggest that golden hamsters having body masses being more than four times that of laboratory mice provide a very interesting model to study aspects of lactation and heat production at the same time.     

Self‐leadership in the context of part‐time teleworking

Employees who work periodically in both a traditional office and home office (part‐time teleworkers) face opportunities and risks related to both working locations. As self‐leadership might play a crucial role in this context, we examined within‐person variations in self‐leadership (self‐reward, self‐punishment, self‐cueing, self‐goal setting, imagining successful performance, and evaluation of beliefs and assumptions) on home days and office days. In a typical workweek, 195 part‐time teleworkers filled out daily surveys (729 days), and we examined the relationship between working location (office and home) and self‐leading behavior as well as the mediating role of autonomy. Finally, we investigated whether self‐leading behavior relates to ego depletion and work satisfaction at the end of the working day. Multilevel analyses revealed that part‐time teleworkers reported higher use of self‐reward, self‐goal setting, and visualization of successful performance on home days than on office days. The association between working location and self‐reward, self‐goal setting, visualization of successful performance, and evaluation of beliefs and assumptions was mediated by autonomy. There were no indirect effects of working location on ego depletion through self‐leadership. However, we found that on home days, part‐time teleworkers were more satisfied with their job at the end of the workday through self‐goal setting.