Micro-spatial variation of soil metal pollution and plant recruitment near a copper smelter in Central Chile

Soil chemical changes produced by metal smelters have mainly been studied on a large scale. In terms of plant survival, determination of small scale variability may be more important because less toxic microhabitats may represent safe sites for successful recruitment and thus for plant survival. Three dominant microhabitats (open spaces and areas below the canopy of Sphaeralcea obtusiloba and Baccharis linearis shrubs) were defined in a heavily polluted area near a copper smelter and characterised in terms of microclimate, general soil chemistry, total and extractable metal concentrations in the soil profile (A0 horizon, 0-5 and 15-20 cm depth), and seedling densities. Results indicated a strong variability in microclimate and soil chemistry not only in the soil profile but also among microhabitats. Air/soil temperatures, radiation and wind speed were much lower under the canopy of shrubs, particularly during the plant growth season. Soil acidification was detected on top layers (0-5 cm depth) of all microhabitats while higher concentrations of N, Cu and Cd were detected on litter and top soil layers below shrubs when compared to open spaces; however, high organic matter content below shrubs decreased bioavailability of metals. Plant recruitment was concentrated under shrub canopies; this may be explained as a result of the nursery effect exerted by shrubs in terms of providing a more favourable microclimate, along with better soil conditions in terms of macronutrients and metal bioavailability.     

Sequential extraction of heavy metals in river sediments of an abandoned pyrite mining area: pollution detection and affinity series

In this paper heavy metal pollution at an abandoned Italian pyrite mine has been investigated by comparing total concentrations and speciation of heavy metals (Fe, Cu, Mn, Zn, Pb and As) in a red mud sample and a river sediment. Acid digestions show that all the investigated heavy metals present larger concentrations in the sediment than in the tailing. A modified Tessier's procedure has been used to discriminate heavy metal bound to organic fraction from those originally present in the mineral sulphide matrix and to detect a possible trend of metal mobilisation from red mud to river sediment. Sequential extractions on bulk and size fractionated samples denote that sediment samples present larger percent concentrations of the investigated heavy metals in the first extractive steps (I-IV) especially in lower dimension size fractionated samples suggesting that heavy metals in the sediment are significantly bound by superficial adsorption mechanisms.     

Modelling of the acid-base properties of natural and synthetic adsorbent materials used for heavy metal removal from aqueous solutions

In this paper a comparison about kinetic behaviour, acid-base properties and copper removal capacities was carried out between two different adsorbent materials used for heavy metal removal from aqueous solutions: an aminodiacetic chelating resin as commercial product (Lewatit TP207) and a lyophilised bacterial biomass of Sphaerotilus natans. The acid-base properties of a S. natans cell suspension were well described by simplified mechanistic models without electrostatic corrections considering two kinds of weakly acidic active sites. In particular the introduction of two-peak distribution function for the proton affinity constants allows a better representation of the experimental data reproducing the site heterogeneity. A priori knowledge about resin functional groups (aminodiacetic groups) is the base for preliminary simulations of titration curve assuming a Donnan gel structure for the resin phase considered as a concentrated aqueous solution of aminodiacetic acid (ADA). Departures from experimental and simulated data can be interpreted by considering the heterogeneity of the functional groups and the effect of ionic concentration in the resin phase. Two-site continuous model describes adequately the experimental data. Moreover the values of apparent protonation constants (as adjustable parameters found by non-linear regression) are very near to the apparent constants evaluated by a Donnan model assuming the intrinsic constants in resin phase equal to the equilibrium constants in aqueous solution of ADA and considering the amphoteric nature of active sites for the evaluation of counter-ion concentration in the resin phase. Copper removal outlined the strong affinity of the active groups of the resin for this ion in solution compared to the S. natans biomass according to the complexation constants between aminodiacetic and mono-carboxylic groups and copper ions.     

Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel

This research paper provides a brief discussion about the relevance of third generation biodiesel co-products diversification. This diversification can be performed through the utilization of residual microalgal biomass (RMB) after oil extraction process. The present work analyses the use of RMB as potential filler for biocomposite production by means of understanding the chemical composition, the thermal stability as well as the protein content of RMB. Thermogravimetric analysis revealed the processing window of the RMB for biocomposite production and its dependence on its purity, especially on residual fat content. Biocomposites of RMB and poly(butylene succinate) (PBS) were prepared by melting processing technique using extrusion followed by injection-molding. Tensile, flexural and impact properties of the processed samples were evaluated. Scanning electron microscopy of fractured sections of the biocomposites was also used to examine the dispersion of RMB in PBS matrix. Finally, this study shows a competitive alternative to produce PBS-RMB biocomposites by replacing PBS by RMB in the range between 20 and 30 %. However, further studies are necessary to improve the compatibility of RMB with PBS to obtain competitive mechanical properties, compared to neat materials through, for instance, block co-polymers.     

Acid mine drainage attenuation by inhibition of pyrite bioleaching using limestone and olive pomace

The control and inhibition of pyrite bioleaching involved in the generation of acid mine drainage was studied. Inhibition of pyrite bioleaching was performed by varying the pyrite concentration in the medium (substrate inhibition) and/or by addition of limestone (inhibition by pH increase) and olive pomace (inhibition by organic compounds). Inhibition tests of pyrite bioleaching were performed according to a full factorial design with three factors (pyrite, limestone and olive pomace) taken at two levels. Preliminary pyrite bioleaching tests showed the ability of the available inoculum to oxidise the mineral. Subsequently, experimental data for total soluble iron denoted strong inhibition under all the different operating conditions of the factorial design, except when larger pyrite concentrations were used. In particular, inhibition by limestone was due to the increase in pH which negatively affects microorganisms, while inhibition by olive pomace may be related to the antioxidant properties of polyphenols. Interactions among operating conditions were specifically assessed by analysis of variance. Only limestone and/or pomace addition resulted in a significant (95%) diminution of iron extraction.     

Characterization of turbulence statistics on the non-aerated skimming flow over stepped spillways: a numerical study

Environmental Fluid Mechanics - In this work we address the mean flow and turbulence statistics in the non-aerated region of a stepped spillway by using two different numerical strategies in two...     

Olive mill solid residues as heavy metal sorbent material: a preliminary study

Biosorption of heavy metals is an innovative and alternative technology to remove these pollutants from aqueous solutions using inactive and dead biomasses such as agricultural and industrial wastes, algae and bacteria. In this study olive mill solid residue was used as heavy metal adsorbent material for its wide availability as agricultural waste and also for its cellulosic matrix, rich of potential metal binding active sites. Preliminary studies concerned with the removal of different heavy metals (Hg, Pb, Cu, Zn and Cd), the effect of pre-treatments by water and n-hexane and the regeneration possibility. Olive mill solid residue resulted able to remove heavy metals from aqueous solutions with an affinity series reflecting the hydrolytic properties of the metallic ions, but also a particular affinity for copper. It can be supposed that biosorption phenomenon occur by a general ion exchange mechanism combined with a specific complexation reaction for copper ions. Water pre-treatment is sufficient to reduce COD release in the effluent according to the law limit, while n-hexane pre-treatment strongly reduces also the adsorption properties of this material. Experimental isotherms obtained under different operating conditions were fitted using a non linear regression method for the estimation of the Langmuir parameters. Moreover a simple Scatchard plot analysis was performed for a preliminary investigation of the active sites, showing the presence of two different site affinities depending on the metal concentration, according to the previous hypothesis of two kinds of uptake mechanisms for copper biosorption. Regeneration tests gave good results in terms of yield of regeneration and also concentration ratios.     

Restoration of a Small High Mountain Lake after Recent Tourist Impact: The Importance of Limnological Monitoring and Palaeolimnology

The natural Park of Peñalara consists of a small mountainousarea near Madrid and includes a series of water bodies (fromsmall mountain lakes to temporary ponds and peat bogs), the mostknown of them being the so-called `Laguna Grande dePeñalara'. Due to growing numbers of visitors theenvironmental conditions of this lake started to decline in theearly 1970s because of: (1) the start of severe soil erosionprocesses; (2) the increase of nutrient load; and (3) theintroduction of a non-native fish species. Since the area wasprotected in 1990, several conservation and restoration projectsincluded in an integrated management plan have been developed. Here we summarise some of the results of these efforts: (1) controlled access of livestock and visitors to the area; (2) palaeolimnology studies aimed at inferring recent changes in thewatershed; and (3) monitoring of the limnological features of thesystem. Restoration of this lake and its watershed is intendedto serve as a model for the management of other severely alteredhigh mountain lakes.     

Organic pollutant burden of the giant mussels Choromytilus chorus from the south-central Chilean coast

A comparative quantitative analysis was made on the contents of organochlorines (OCh) and polycyclic aromatic hydrocarbons (PAH) in tissues of the giant mussel Choromytilus chorus from three bays in south-central Chile exposed to various degrees of pollutant input. Mussels from the three bays contained levels of OCh near the detection limits of method, with a tendency to be slightly higher in the polluted bay (San Vicente) than in the other bays (Corral and Yaldad). PAH levels and types in Corral and Yaldad were well below of carcinogenicity permitted in mussels for human consumption.