静态旋流强化湿法烟气脱硫研究进展

静态旋流作为湿法烟气脱硫中一种强化传质的方式,对其发展现状与趋势展开研究。分析了旋流吸收器的内部气相速度场以及强化传质的过程原理,综合比较了各类气液接触的脱硫方式、脱硫剂的特征,确定了在运行范围内脱硫剂浓度、气液流速、SO₂浓度等操作参数对于脱硫效率η和气相总体积传质系数K_ga的影响及其机理,剖析了利用传质理论进行旋流吸收的研究及发展,介绍了旋流脱硫的工业应用。结果表明:静态旋流有助于脱硫传质过程的强化,在工况范围内,吸收液浓度、气液流速的增加,提高了η和K_ga,但随着SO₂浓度的增加,η及K_ga略有下降,分别最高下降7.1%和0.75 s-1,总工况范围内η和K_ga分别为68.58%~97.63%和5.08~8.46 s-1。研究结果可对基于旋流强化的工业烟气脱硫提供参考。     

含水层介质中1株异养硝化-好氧反硝化菌的分离鉴定与脱氮性能

从受氮污染浅层含水层介质中分离纯化得到1株高效异养硝化-好氧反硝化细菌XK51,经过菌落形态、生理生化特性及16S rDNA基因序列分析,鉴定该菌株为假单胞菌属恶臭假单胞菌(Pseudomonas Putida)。脱氮性能结果表明:XK51为兼性反硝化细菌,能在好氧或缺厌氧条件下高效反硝化脱氮,最大和平均反硝化速率分别为27.3,4.4 mg/(L·h),硝酸盐脱除率为95.3%;该菌株同时具有较高异养硝化能力,最大和平均硝化速率分别为4.2,1.4 mg/(L·h),氨氮脱除率为98.5%。XK51最佳碳源为柠檬酸三钠,适宜生长温度为28~35 ℃,最适温度为30 ℃;适宜生长pH为6.5~8.0,最适pH为7.0。XK51可同时进行异养硝化及同步硝化-反硝化,培养期间未出现明显亚硝酸盐和硝酸盐累积,在含氮污废水处理和地下水氮污染修复方面具有潜在工程应用价值。     

污泥生物炭去除水中重金属的研究进展

重金属带来的环境风险日益严峻,利用污泥生物炭去除水中重金属污染方面的研究得到了广泛关注。结合当前国内外研究现状,归纳了不同条件下制备的污泥生物炭对水中重金属,如Cd、Pb、Cr、As等的吸附机理,污泥生物炭对大多数重金属的吸附满足物理吸附和化学吸附的多重作用,可通过增加生物炭表面有效基团及有效吸附位点提升吸附性能。同时,总结了影响吸附效率的各种因素,探究了污泥生物炭的再生问题,并对今后污泥生物炭去除水中重金属的研究方向做出了展望。     

石墨烯/聚苯胺修饰阴极对反硝化MFC性能影响

反硝化生物阴极微生物燃料电池（MFC）以电极为电子供体,在自养条件下完成硝酸盐去除过程.本研究以碳布（CC）为基底材料,分别制备获得还原氧化石墨烯修饰（rGO-CC）,聚苯胺修饰（PANI-CC）及二者复合修饰的CC电极（rGO/PANI-CC）,并考察其作为阴极材料对反硝化生物阴极MFC产电脱氮性能的影响.扫描电镜结果显示,rGO-CC和PANI-CC的碳纤维分别被片层状rGO和网状PANI覆盖,而rGO/PANI-CC表面呈现PANI在附着rGO的碳纤维上团聚的形貌,均增大了碳布的比表面积.循环伏安测试显示,rGO/PANI-CC具有最高的电化学活性.以rGO-CC,PANI-CC和rGO/PANI-CC为阴极构建MFC的产电能力分别提高了82%,24%和41%,其阴极对NO₃^--N的去除能力增强了23%,9%和13%.16S rDNA测序结果揭示修饰后电极表面微生物的多样性下降,Stappia和Pacacoccus属微生物的丰度增加.     

基于Stacking的地面PM2.5浓度估算

为了解决地面PM_2.5监测网络在空间和时间覆盖受限的问题,提出了基于宽时空覆盖的卫星气溶胶光学厚度AOD,利用Stacking方法建立地面PM_2.5浓度估算模型,将AOD、PM_2.5和各气象参数以及与PM_2.5排放有关的数据进行训练,使用改进网格搜索对模型超参数进行优化,通过对多重共线性分析,建立基于Stacking的最优PM_2.5浓度估算模型。选取2016-01-01-2016-12-31的数据作为实验对象,结果表明:相比于随机森林、GBRT和XGBoost 3种模型,使用岭回归作为元学习器的Stacking模型性能更优,可见Stacking适用于大范围地理区域的大气污染监测。     

建筑垃圾堆放点样本集构建与优化研究

为更好地解决手工制作的建筑垃圾堆放点样本集效率低、数据量少,难以支撑基于深度学习的遥感图像目标检测算法训练需求的问题,采用基于像素的遥感分类方法构建建筑垃圾堆放点样本集,在此基础上结合直方图均衡化,CS-LBP算子约束以及迁移学习的方法对Wasserstein生成对抗模型（WGAN）进行优化,实现了样本集扩充。研究结果表明:相对于纯手工制作的样本集,基于像素的遥感分类方法可以显著提升样本集制作的效率;同时,经过WGAN优化后,生成样本模拟了原始数据的颜色与纹理特征分布规律,增加了原始数据的多样性,满足了扩充样本集的需求。     

中国工业园区绿色发展政策对比分析及对策研究

为了提升我国工业园区绿色发展水平,对目前我国工业园区发展历程、现状特征进行了分析,对工业园区绿色发展政策进行了梳理和对比,并结合工业园区绿色发展中存在的问题提出了对策建议.研究表明:①我国工业园区经历了快速发展、调整发展和科学发展等阶段,在经济发展、资源与能源优化利用、污染减排等方面成效显著.②我国工业园区绿色发展的相关政策主要体现在国家生态工业示范园区创建、园区循环化改造、国家低碳工业园区试点、绿色园区建设和UNIDO绿色工业园区创建等工作中,这些政策在推动主体、实施路径、侧重方向上各不相同又各有特色,对推动工业园区节能减排绩效明显.③目前,我国工业园区绿色发展存在的问题主要表现在重视程度有待提升、风险防范意识有待加强、创新能力有待提高等方面.为此,提出了我国工业园区绿色发展对策建议:积极践行绿色发展理念,推进园区绿色化、生态化、低碳化建设,实现经济环境双赢;注意环境风险防控,确保环境安全;创新管理机制,强化监督管理.      

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

武当山夏季颗粒物数浓度谱分布特征及气团来源影响研究

为研究大气边界层中上层大气颗粒物的数浓度谱分布特征及气团来源的影响,于2018年6月利用3080型SMPS粒径谱仪对武当山14.6~660 nm颗粒物数浓度谱进行观测,分析和探讨了其数浓度谱分布及日变化特征,并结合后向轨迹、潜在源贡献因子法（PSCF）与浓度权重轨迹分析法（CWT）探讨对武当山颗粒物数浓度影响较大的外源输送路径和贡献源区.结果表明:①武当山大气颗粒物主要以爱根模态为主,平均数浓度为2 500个/cm3,积聚模态、核膜态平均数浓度分别为2 265、359个/cm3,3种模态数浓度分别占总数浓度的48.79%、44.21%、7.01%.②在新粒子生成日,核膜态数浓度于10:00开始上升,11:00—17:00的核膜态数浓度相对较高,约2 000个/cm3.新粒子生成日ρ（SO₂）与ρ（O₃）的日变化趋势均与核模态数浓度较为相似,表明SO₂和O₃参与光化学反应后的产物（硫酸及有机物）有利于新粒子的生成与增长.新粒子生成日风速、温度均大于非新粒子生成日,但相对湿度较低.③在东部及局地气团影响下大气颗粒物主要以积聚模态为主,数浓度分别为2 311和2 596个/cm3;核模态、爱根模态数浓度在受西北气团影响时最大,数浓度分别为806和3 078个/cm3.④潜在源区分析表明,影响武当山积聚模态数浓度的主要源区为十堰市本地及襄阳市,二者贡献值在840个/cm3以上.研究显示,武当山颗粒物主要以爱根模态为主,颗粒物数浓度日变化主要受大气边界层发展及山谷风的影响,较高的ρ（SO₂）与ρ（O₃）以及高温、低湿及较大的风速均有利于新粒子的生成,周边城市的区域性传输对武当山颗粒物的影响较大.