The trade-off between economic growth and environmental quality: does economic freedom asymmetric matter for Pakistan?

Environmental Science and Pollution Research - This empirical study investigates the dynamic effects of economic freedom on economic growth and air quality for Pakistan over the period...     

Effect of land use changes on non-carcinogenic health risks due to nitrate exposure to drinking groundwater

Environmental Science and Pollution Research - This study aimed to determine the effect of land-use changes on the non-carcinogenic health risk of nitrate ion exposure of underground drinking water...     

The strain gradient approach to predict necking in tube hydroforming

A stress-based forming limit diagram for necking prediction which is based on the strain gradient theory of plasticity in conjunction with the M–K model has been represented and used in tube hydroforming. In this study, the finite element model for bulge forming of straight tube has been constructed and verified with published experimental data. The adaptive simulation technique is based on the ability to detect the onset and growth of defects (e.g., wrinkling, and bursting) and to promptly readjust the loading paths. Thus, a suitable load path has been obtained by applying Adaptive Simulation Method in ANSYS Parametric Design Language (APDL).     

Prevalence of Norovirus Infection in Children and Adults with Acute Gastroenteritis,Tehran, Iran, 2008–2009

Noroviruses are one of important agents that cause acute viral gastroenteritis worldwide. These viruses are belonging to Caliciviridae family and are genetically diverse. To date, there is no valuable data about prevalence of norovirus infection and the dominant genogroup/genotype among Iranian population. The objective of this study was to determine the frequency of norovirus infection in Iranian patients with gastroenteritis referred to three hospitals of Tehran and to specify the dominant genogroup/genotype of this virus among our study population. A total of 293 patients with acute gastroenteritis were included in the study. Detection of norovirus was performed using RT-PCR method and confirmed by direct sequencing with specific designed primers for capsid region of norovirus genome. Phylogenetic analysis was performed using the neighbor-joining method. Norovirus strains identified in our study were subsequently categorized according to previously defined genogroup/genotypes. Of these, norovirus GII was dominant genogroup. Sixty-five percent (17 of 26) of positive samples were determined as GII and 35% (9 of 26) were determined as GI, respectively, in 2008–2009. And among 8 sequenced strains of genogroup II the most frequent genotype was GII.3. The results of this study indicated that norovirus must be considered as one of the infectious causes of acute gastroenteritis among Iranian population. We also found that GII.3 is more prevalent in our study population. To the best of our knowledge there is limited data about the role of noroviruses in children and adults’ acute gastroenteritis among Iranian patients and this prevalence and genotyping report of norovirus infection could be remarkable for further studies.     

Leaching of styrene and other aromatic compounds in drinking water from PS bottles

Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene （PS） bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as ＂purge and trap＂ and analysed by gas chromatograph-mass spectrometer （GC/MS）. Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.     

Determination of organochlorine and organophosphate pesticide residues in fruits,vegetables and sediments

Abstract

A method is described for the determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments. The concentrated solvent extract was sealed in a polymeric membrane tube, dialysed in cyclohexane and the solvent replaced with hexane. The organophosphates were analysed on a specific thermionic detector without further clean‐up. For the organochlorine pesticides the extract was eluted through 3 g of alumina and analysed on GC/ECD. The clean‐up for sediment extract was carried out on a10 g alumina column with 100 mL hexane containing 5% acetone and the eluate was concentrated to 5 mL.

The detection limit for organophosphates on a 40 g sample and a final volume of 10 mL was on the average 0.01 mg/kg. The detection limit for organochlorine pesticides, with the final volume of 25 mL, was 0.005 mg/kg for all pesticides except for p,p'‐DDT and endosulfan sulphate, which was 0.01 mg/kg.

The detection limit for oganochlorine pesticides in sediment, with the final volume of 2 mL, was less than 1 μg/kg and for organophosphate pesticides less than 10 μg/kg when the final volume was made to 0.5 mL. At the detection limits the method produced a very high coefficient of variation for both organochlorine and organophosphate pesticides.     

Erosion Modeling in Hard Rock Terrain Using Morphometry: A Case Study from Tamilnadu,India

Remote sensing and geographical information system (GIS) can help identify erosion‐prone areas in need of soil conservation efforts     

Natural gas engine driven heat pump system – a case study of an office building

ABSTRACT

An eQUEST model was developed to conduct a simulation study of a natural gas engine-driven heat pump (GEHP) for an office building in Woodstock, Ontario, Canada. Prior to the installation of the GEHP, the heating and cooling demands of the office building were provided by rooftop units (RTUs), comprising of natural gas heater and electric air conditioner. Energy consumption for both GEHP and RTUs were monitored for operation in alternating months. These recorded energy consumptions along with weather data were used in the regression analysis. The developed eQUEST models were validated and calibrated with the regression analysis results with respect to the ASHRAE Guideline 14–2014. The eventual models were then applied to investigate the potential annual energy consumption, greenhouse gas (GHG) emission and energy cost savings achieved by using the GEHP in Woodstock, and other cities in Canada, particularly in Ontario.     

Residues of dicofol on cucumber grown under plastic covers in Jordan

Residues of dicofol were determined on cucumber leaves and fruits under plastic house (PH) and plastic tunnels (PT). Five sprays, 8 d apart, were applied at 0.15% concentration. Initial deposits on leaves were 48 and 58 ppm under PH and PT, respectively. In the last sampling date of leaves, the amounts of 191 and 135 ppm were detected under both cultures, respectively. There was a continuous increase in the initial residue after each spray. The highest amount of dicofol (401) was determined 1 d after the fifth spray under PH. The exposure to high residues may pose a risk to fieldworkers. On cucumber fruits, residues of 0.95 and 1.60 ppm were determined 1 d after the fourth spray under PH and PT, respectively. These residues decreased after 4 d to 0.40 and 1.49 ppm, respectively. Almost no detectable residues could be determined 8 d after sprays number 4 and 5 under both cultures. All dicofol residues on the fruits were below the tolerance level of 2 ppm.     

The fly ash influenced the heavy metal status of the soil and the seeds of sunflower. A case study

In this study, four cultivars of sunflower (Helianthus annuus) were grown in the sandy loam soil, supplemented with graded (v/v) quantity (0, 20, 40, 60, 80, 100%) of the fly ash, released by the combustion of the coal from the thermal power plant. The presence of fly ash in the soil increased its porosity, water holding capacity, pH, E.C., C.E.C., the content of sulphate, carbonate, bicarbonate, chloride, phosphorus, potassium, calcium and various trace elements. However, in the seeds, except Fe, Pb, Mn and Zn, and other heavy metals remained untraced up to 40% of the fly ash, above that their quantity slightly increased but the values are very much under the permissible limits.