Exposure profiles of mercury in human hair at a terai belt of North India

Human hair is frequently used as a bioindicator of mercury exposure. Mercury (Hg) has for centuries been a useful metal in a variety of applications. Unfortunately, this usefulness is counterbalanced by its neurotoxicological health impact. The US Environmental Protection Agency recommends keeping the hair Hg level <1.0 µg/g. Therefore, an investigation has been performed in order to ascertain the hair Hg levels among the people living at the terai belt of North India. Hair samples were collected from 111 individuals and were placed in an identified plastic bag, stapled to prevent the shift of the hair strand. Samples were analyzed by combustion, gold amalgamation, atomic absorption spectrometry (C-GA-AAS). The mean Hg level in hair was 0.28 µg/g for the whole group ranging from 0.0012 to 1.9091 µg/g. The mean hair Hg levels were 0.16 µg/g for men and 0.12 µg/g for women, indicating that men had higher hair Hg levels than women. Total hair Hg was found to be significantly associated with age, gender and fish consumption frequency. 98 % of the total sample had hair Hg concentrations less than 1.0 µg/g, i.e, within safe dose, whereas only 2 % had Hg concentrations greater than 1.0 µg/g, thereby exceeding the safe dose.

     

Experimental investigation of solar-powered desiccant cooling system by using composite desiccant “CaCl<Subscript>2</Subscript>/jute”

A solar-powered composite desiccant cooling system has been experimentally investigated. It consists of evacuated tube solar water heater, composite desiccant bed heat exchanger (CDBHE), direct evaporative cooling unit and cooling tower. The composite desiccant material has been synthesized by using iron mesh and jute layer impregnated with calcium chloride solution, and this composite desiccant is placed in shell- and tube-type heat exchanger to make CDBHE. In this desiccant cooling system, the evacuated tube solar water heater is used to produce required hot water for regeneration of composite desiccant material. A cooling tower is used to produce cooling water which is pumped into CDBHE during dehumidification process to remove heat of adsorption. Direct evaporative cooling unit is used to cool the outlet process air of CDBHE. It has been found that the average dehumidification rate increases by 54.1 % when using circulating cooling water. The COP_th of desiccant cooling system has been found to be 0.46 with a cooling capacity of 353.8 W.     

Landowner Motivations for Civic Engagement in Water Resource Protection

Scholars and water resource professionals recognize citizens must get involved in water resource issues to protect water resources. Yet questions persist on how to motivate community members to get and stay civically involved in nonpoint source pollution issues, given that problems are often ill‐defined. To be successful, interventions intended to engage individuals in collective action must be based on an understanding of the determinants of public‐sphere behavior. The purpose of this study is to explore the psycho‐social factors which influence landowner civic engagement in water resource protection. Data were collected using a self‐administered mail survey of landowners in the Cannon River Watershed and analyzed using structural equation modeling. Study findings suggest landowners are more likely to be civically engaged in water resource issues if they feel a personal obligation to take civic action and perceive they have the ability to protect water resources. Landowners who believe water resource protection is a local responsibility, perceive important others expect them to protect water resources, and believe they have the ability to protect water resources are more likely to feel a sense of obligation to take civic action. A combination of strategies including civic engagement programs addressing barriers to landowner engagement will be most effective for promoting civic engagement in water resource protection.     

Translocation of metals from fly ash amended soil in the plant of Sesbania cannabina L. Ritz: effect on antioxidants

The plants of Sesbania cannabina Ritz grown on different amendments of fly ash (FA), have shown a high accumulation of metals (Fe, Mn, Zn, Cu, Pb and Ni). The highest accumulation of Fe the and lowest level of Ni were recorded in these plants. The different amendments of fly ash with garden soil (GS) were extracted with DTPA and the levels of metals were found to be decreased with an increase in fly ash application ratio from 10% to 50% FA. The analysis of the results showed an increase in the level of malondialdehyde (MDA) content of the roots for all the exposure periods. The maximum increases of 136% (roots) and 120% (leaves) were observed in MDA content at 100% FA after 30 d of growth of the plant, compared to GS. The level of antioxidants was found to increase for all the exposure periods in the roots of the plants to combat metal stress. At 30 d, the maximum increase of 57% (ascorbic acid) and 78% (free proline) was observed in the roots of the plants grown on 100% and 10% FA, respectively, as compared to their respective GS. At 90 d, a maximum increase of 42% (cysteine) and 117% (NPSH) was recorded in the roots of the plants grown on 25% and 100% FA, respectively, as compared to their respective GS. In leaves, a significant increase in antioxidants i.e. cysteine, NPSH and free proline content was recorded after 30 d, whereas no such trend was observed for the rest of the exposure periods. The chlorophyll and carotenoid contents increased with an increase in the FA amendment ratio from 10% to 50% FA for all the exposure periods as compared to GS. In both roots and leaves, the level of protein content increased in all the amendments and 100% FA at 30 d as compared to GS. Thus, there is a balance in the level of MDA content and level of antioxidants in the plants at 90 d. In view of its tolerance, the plants may be used for phytoremediation of metals from fly ash contaminated sites and suitable species for plantation on fly ash land fills.     

Evaluation of model simulated atmospheric constituents with observations in the factor projected space: CMAQ simulations of SEARCH measurements

Two-year CMAQ simulations of gases and aerosols over the southeast are evaluated using SEARCH observations for 2000 and 2001, both by direct comparison to observations and by projecting both datasets to the factor space using the Positive Matrix Factorization (PMF) model. Model performance for secondary species (sulfate, ozone) is generally better than for primary species (EC, CO). Nitrate concentrations are overestimated, mainly due to wintertime over-partitioning to the particulate phase. Projecting both observed and simulated constituents to the factor space using PMF, four common factors are resolved for each surface site (two urban sites and two rural sites). The resolved factors include (1) secondary sulfate, (2) secondary nitrate, (3) a fresh motor vehicle factor characterized by EC, OC, CO, NO and NO_y, and (4) a mixed factor characterized by EC, OC, and CO. Performance for the sulfate and nitrate factors follow that of the corresponding driving species, while the motor vehicle and “mixed” factors exhibit performance corresponding to that of primary species. Comparing observations and CMAQ simulations in the projected space allow for an evaluation of the co-variability between species, an indicator of source impacts. The fact that similar factors were resolved by PMF from both the observations and the CMAQ simulations suggests that temporal processes related to emissions from specific source categories, as well as the subsequent dispersion and reactivity, are well captured by the CMAQ model. The ability to identify additional factors can be enhanced by adding tracer species in CMAQ simulations.     

A fuzzy composting process model

Composting processes are normally complicated with a variety of uncertainties arising from incomplete or imprecise information obtained in real-world systems. Previously, there has been a lack of studies that focused on developing effective approaches to incorporate such uncertainties within composting process models. To fill this gap, a fuzzy composting process model (FCPM) for simulating composting process under uncertainty was developed. This model was mainly based on integration of a fractional fuzzy vertex method and a comprehensive composting model. Degrees of influence by projected uncertain factors were also examined. Two scenarios were investigated in applying the FCPM method. In the first scenario, model simulation under deterministic conditions was conducted. A pilot-scale experiment was provided for verifications. The result indicated that the proposed composting model could provide an excellent vehicle for demonstrating the complex interactions that occurred in the composting process. In the second scenario, application of the proposed FCPM was conducted under uncertainties. Six input parameters were considered to be of uncertain features that were reflected as fuzzy membership functions. The results indicated that the uncertainties projected in input parameters will result in significant derivations on system predictions; the proposed FCPM can generate satisfactory system outputs, with less computational efforts being required. Analyses on degree of influence of system inputs were also provided to describe the impacts of uncertainties on system responses. Thus, suitable measures can be adopted either to reduce system uncertainty by well-directed reduction of uncertainties of those high-influencing parameters or to reduce the computational requirement by neglecting those negligible factors.     

Persistence and Dissipation Kinetics of Spiromesifen in Chili and Cotton

In a field study carried out at three different locations, the dissipation of spiromesifen on cotton and chili was studied and its DT₅₀, and DT₉₉ were estimated at each location. Spiromesifen was sprayed on chili at 96 and 192 g a.i. ha⁻¹ and cotton at 120 and 240 g a.i. ha⁻¹. Samples of chili fruits were drawn at 0, 1, 3, 5, 7, 10, 15, 21, 30 days after treatment and that of cotton seed and lint at first picking and harvest. Soil samples were drawn 30 days after treatment from 0 to 15 and 15 to 30 cm layer. Quantification of residues was done on GC–MS in Selected Ion Monitoring (SIM) mode in mass range 271–274 m/z. The LOQ of this method was found 0.033 μg g⁻¹, LOD being 0.01 μg g⁻¹. The DT₅₀ of spiromesifen when applied at recommended doses in chili fruits was found to be 2.18–2.40 days. Ninety-nine percent degradation was found to occur within 14.5–16.3 days after application. Residues of spiromesifen were not detected in cotton seed and lint samples at the first picking. In soil, no residues of spiromesifen were detectable 15 days after treatment.     

Cleaning the river Damodar (India): impact of COVID-19 lockdown on water quality and future rejuvenation strategies

Globally, it is established that the partial lockdown system assists to improve the health of the total environment due to inadequate anthropogenic actions in different economic sectors. The ample research on fitness of environment has been proved that the strict imposition of lockdown was the blessings of environment. The river Damodar has historical significance and lifeline for huge population of Jharkhand and West Bengal state of India but in the recent years the water quality has been deteriorated due to untreated industrial effluents and urban sewage. The main objective of this study is to examine the water quality of river Damodar during and prelockdown phase for domestic use and restoration of river ecosystem. A total of eleven (11) effluent discharge sites were selected in prelockdown and during lockdown phase. A new approach of water quality assessment, i.e., water pollution index (WPI) has been applied in this study. WPI is weightage free, unbiased method to analysis of water quality. The result shows that the physical, chemical and heavy elements were found beyond the standard limit in prelockdown period. The cation and anion were arranged in an order of Na²⁺ ?>?K⁺ ?>?Ca²⁺ ?>?Mg²⁺ and Cl^??>?So₄^??>?No₃^??>?F^? in both the sessions. WPI of prelockdown showed that about 100% water samples are of highly polluted. WPI of lockdown period showed that around 90.90% samples improved to ‘good quality’ and 9.10% of samples are of ‘moderately polluted.’ Hypothesis testing by ‘t’ test proved that there was a significant difference (ρ?=?0.05%) in values of each parameter between two periods. Null hypothesis was rejected and indicated the improvement of river water quality statistically. Spatial mapping using Arc GIS 10.4 interpolation (IDW) helps to understand spatial intensity of pollution load in two periods. This research study should be helpful for further management and spatial diagnosis of water resource of river Damodar.