Enhanced desorption of phenanthrene from soils using hydroxypropyl-beta-cyclodextrin: experimental results and model predictions

Objective of this study was to evaluate the effects of hydroxypropyl-beta-cyclodextrin (HPCD) on the removal of phenanthrene from solid phase. Batch tests for the phenanthrene distribution between aqueous and solid phase were conducted in the presence of HPCD. Column tests and numerical simulations were conducted to evaluate the roles of HPCD cavities and interaction rates between water, HPCD, and solid phase in the enhanced removal of phenanthrene. Experimental results showed that HPCD was effective in removing sorbed phenanthrene from subsurface environment, primarily due to its negligible sorption to the solid phase and the partitioning of phenanthrene into HPCD cavities. From the numerical simulations, it was found that rate-limited partitioning of phenanthrene into HPCD cavities was most influential factor in the enhanced elution of phenanthrene. Sorption and desorption rate of phenanthrene between aqueous and solid phase was very fast or near equilibrium state. Interaction rates of contaminant between water, HPCD, and solid phase could be affected by other factors such as soil types and organic matter contents. Results from this study implied that HPCD flushing could be effectively applied for the removal of hydrophobic organic pollutants existing in the soils as sorbed or NAPL state.     

Stabilization of the As-contaminated soil from the metal mining areas in Korea

Phytoextraction is a remediation technology with a promising application for removing arsenic (As) from soils and waters. Several plant species were evaluated for their As accumulation capacity in hydroponic culture amended with As. Cucumis sativus (cucumber) displayed the highest tolerance against As among 4 plants tested in this study (corn, wheat, sorghum and cucumber). The germination ratio of Cucumis sativus was more than 50% at the high concentration of 5,000 mg-As/l. In Cucumis sativus grown in a solution contaminated with 25 mg-As/l, the accumulated As concentrations in the shoot and root were 675.5 ± 11.5 and 312.0 ± 163.4 mg/kg, respectively, and the corresponding values of the translocation and bioaccumulation factors for As were 1.9 ± 0.9 and 21.1 ± 8.4, respectively. These results indicate Cucumis sativus is to be a candidate plant for phytoextraction of As from soils and water.     

Application of Zn-contaminated soil: Feasibility study on the removal of H2S from hot coal-derived gas

In this study, zinc-contaminated soils were chosen as a candidate material for the removal of hydrogen sulfide (H₂S) from hot coal-derived gas. Laboratory experiments showed that H₂S was decreased to less than 10 ppm when the zinc-contaminated soils were reacted with H₂S. The best removal temperature of H₂S was found to be at 550°C in the operating conditions. In addition to zinc species, free iron oxides in contaminated soils also performed an active species to react with H₂S and enhanced the sulfur capacity. Through the XPS analysis, iron sulfide (FeS) and zinc sulfide (ZnS) were the major products after removal experiments. Regeneration experimental results indicated that the zinc-contaminated soils can be regenerated by pass diluted air and thus be reused on the removal of H₂S for many times.     

Effects of ozonation and coagulation on effluent organic matter characteristics and ultrafiltration membrane fouling

Effluent organic matter （EfOM） is the major cause of fouling in the low pressure membranes process for wastewater reuse. Coagulation and oxidation of biological wastewater treatment effluent have been applied for the fouling control of microfiltration membranes. However, the change in EfOM structure by pre-treatments has not been clearly identified. The changes of EfOM characteristics induced by coagulation and ozonation were investigated through size exclusion chromatography, UV/Vis spectrophotometry, fluorescence spectrophotometry and titrimetric analysis to identify the mechanisms in the reduction of ultrafiltration （UF） membrane fouling. The results indicated that reduction of flux decline by coagulation was due to modified characteristics of dissolved organic carbon （DOC） content. Total concentration of DOC was not reduced by ozonation. However, the mass fraction of the molecules with molecular weight larger than 5 kDa, fluorescence intensity, aromaticity, highly condensed chromophores, average molecular weight and soluble microbial byproducts decreased greatly after ozonation. These results indicated that EfOM was partially oxidized by ozonation to low molecular weight, highly charged compounds with abundant electron- withdrawing functional groups, which are favourable for alleviating UF membrane flux decline.     

Determination of the applicable exhaust airflow rate through a ventilation shaft in the case of road tunnel fires

In this study, a model experiment in a long road tunnel employing the longitudinal ventilation system with a ventilation shaft is carried out during a fire accident to determine the optimum exhaust airflow rate through the ventilation shaft. The appropriate operation of the shaft fan according to the position of fire is investigated, and the optimum exhaust airflow rate for prevention of smoke spreading through the tunnel is determined based on the entire exhaust of both smoke and airflow generated by fire and jet fan operation, respectively. As a result of using the amount of smoke, the critical air velocity produced by jet fans, the effective cross-sectional area of a tunnel and the correction factor, a formula for exhaust airflow rate is drived. In addition, a correction factor (α = 1.1) for the thermal expansion caused by heat of a 20 MW fire is determined theoretically and experimentally. It is expected that this study will contribute to plan the shaft operation for the emergency ventilation as well as provide the preliminary data to design the airflow rate of shaft.     

Do foreign direct investments influence environmental degradation? Evidence from a panel autoregressive distributed lag model approach to low-, lower-middle-, upper-middle-, and high-income countries

Environmental Science and Pollution Research - The main aim of the present study is to examine the possible nonlinear relations between foreign direct investments and environmental deterioration...     

Thermal Stabilization of Recycled PET Through Chain Extension and Blending with PBT

This study investigates the effect of using a multifunctional epoxide chain extender (Joncryl^® ADR 4468) on the thermal stabilization and rheological properties of recycled polyethylene terephthalate (R-PET) and its blends with polybutylene terephthalate (PBT). The R-PET samples were prepared without and with chain extender (CE) contents of 0.4 wt% and 0.8 wt%. R-PET/PBT blends with weight ratios of 75w/25w, 50w/50w and 25w/75w were also prepared without and with a given CE content of 0.2 wt%. The thermal stability of the melt blended samples was analyzed through small amplitude oscillatory shear (SAOS) rheological experiments. The structure of the samples was evaluated using a Fourier transform infrared (FTIR) spectrometer. While the dynamic rheological properties of R-PET were improved with the addition of Joncryl and by blending with PBT, during the SAOS rheological experiments, the complex viscosity of R-PET further increased due to the concurrent polycondensation of R-PET and the resumption of Joncryl reaction with R-PET molecules. These reactions during the rheological experiments were further expedited with increasing the testing temperature. On the other hand, in R-PET/PBT blends, the reactivity of Joncryl was more noticeable in blends with higher R-PET contents due to the higher available internal reactive sites of much shorter R-PET molecules. It was observed that the addition of only 0.2 wt% Joncryl to the blends of R-PET/PBT (75w/25w) dramatically improves the thermal stability and dynamic rheological properties of R-PET and most likely its processability.

     

Electrospun Composite Nanofibers Based on Poly (ε-Caprolactone) and Styrax Liquidus (Liquidambar orientalis Miller) as a Wound Dressing: Preparation,Characterization, Biological and Cytocompatibility Results

Journal of Polymers and the Environment - In this study, styrax liquidus (sweet gum balsam) extracted from Liquidambar orientalis Mill. incorporated PCL fibrous scaffolds were prepared using the...