Bioleaching of heavy metals from sewage sludge,direct action of Acidithiobacillus ferrooxidans or only the impact of pH?

Journal of Material Cycles and Waste Management - The bioleaching process comprises two mechanisms: direct action of the bacteria and indirect effect of low pH. In this work, the effect of bacteria...     

Wood Plastic Composite Panels: Influence of the Species,Formulation Variables and Blending Process on the Density and Withdrawal Strength of Fasteners

In this work, the influence of four variable parameters including fiber types (poplar and rice straw), fiber contents (45, 60, and 75 wt%), fiber sizes (20–40 and 40–60 mesh), and blending methods (hot-pressing and extrusion) on the physico-mechanical properties of wood plastic composite panels were studied. Generally, the results showed that each of the above-mentioned parameters had significant effect on the nail and screw withdrawal strength (pull-out load) and density, whereas their interactions did not have highly impressive effects on the properties. All tested properties vary significantly with fiber origin. Composites filled with larger fiber size, produced panels with higher withdrawal strength and density. The effect of blending method on density was maximal. Withdrawal strength values of each sample decreased with increase in fiber loading. The lowest withdrawal strength values of nail and screw were obtained from the samples filled with rice straw. It was found that strength properties of the composites can be improved moderately by adding 45 wt% fiber, 20–40 mesh particle and poplar flour. According to the results, the blending method is a significant variable in the determination of withdrawal strength. Therefore, the blending method can be recommended based on the end product applications.     

Estimating and mapping forest biomass using regression models and Spot-6 images (case study: Hyrcanian forests of north of Iran)

Hyrcanian forests of North of Iran are of great importance in terms of various economic and environmental aspects. In this study, Spot-6 satellite images and regression models were applied to estimate above-ground biomass in these forests. This research was carried out in six compartments in three climatic (semi-arid to humid) types and two altitude classes. In the first step, ground sampling methods at the compartment level were used to estimate aboveground biomass (Mg/ha). Then, by reviewing the results of other studies, the most appropriate vegetation indices were selected. In this study, three indices of NDVI, RVI, and TVI were calculated. We investigated the relationship between the vegetation indices and aboveground biomass measured at sample-plot level. Based on the results, the relationship between aboveground biomass values and vegetation indices was a linear regression with the highest level of significance for NDVI in all compartments. Since at the compartment level the correlation coefficient between NDVI and aboveground biomass was the highest, NDVI was used for mapping aboveground biomass. According to the results of this study, biomass values were highly different in various climatic and altitudinal classes with the highest biomass value observed in humid climate and high-altitude class.     

A review of methods of public land ownership and allocation for housing in Iran

In the aftermath of the 1979 revolution, the new administration adopted a number of policies to address the question of land ownership, supply and allocation in order to tackle the acute shortage of housing in the urban areas. In 1982, the Five‐Year Urban Land Act was passed by the Parliament. Subsequently a body called the Urban Land Organisation (ULO) was set up to co‐ordinate the process of land preparation and allocation. The 1982 Urban Land act empowered the government to: (a) expropriate certain categories of abandoned urban land, and (b) to set a temporary time schedule of five years during which the act's work will be monitored.

This paper sets out to examine the policies related to urban land which have been introduced and implemented in the 1980s in Iran.     

Thermal and Environmentally Induced Degradation Behaviors of Amorphous and Semicrystalline PLAs Through Rheological Analysis

Journal of Polymers and the Environment - The degradation behaviors of an amorphous and a semicrystalline PLA (i.e., aPLA and cPLA) with similar molecular weights are compared at elevated...     

Multi-route human health risk assessment from trihalomethanes in drinking and non-drinking water in Abadan,Iran

Natural organic matter reacted with chlorine used for disinfection, and finally, trihalomethanes (THMs) are formatted. The main purpose of this study was to determine four THM concentrations and human health cancer risk and non-cancer risk assessment from exposure through oral ingestion, dermal contact, and inhalation for males and females in Abadan. Two sampling sites were selected, and five samples before and after treatment by two different water treatment systems (RO and ion exchange) were collected every week. Results showed that total THM concentrations before and after treatment by RO were 98.1 and 8.88 μg/L, and ion exchange ranged between 101.9 and 14.96 μg/L, respectively, that before treatment was upper than the maximum of 80 mg/L recommended by USEPA. Inhalation was the primary route of exposure by around 80–90% of cancer risk. Total cancer risk was higher than the USEPA acceptable limit of 10^?6 via three exposure routes. Oral route has the higher hazard index values than dermal ways.

     

A new method for environmental site assessment of urban solid waste landfills

Regarding various types of pollutant, waste management requires high attention. Environmental site selection study, prior to landfill operation, and subsequently, monitoring and maintaining of the location, are of foremost points in landfill site selection process. By means of these studies, it is possible to control the undesirable impacts caused by landfills. Study ahead aims at examination of effectiveness of a new method called Monavari 95–2 in landfill site assessment. For this purpose, two landfills Rasht and Andisheh, which are, respectively, located on humid and arid areas, were selected as case studies. Then, the results obtained from both sites were compared with each other to find out the weaknesses and strengths of each site. Compared with others similar methods, much more criteria (53 parameters) can be considered within this method, so the results will be more calculable. According to this method, Rasht landfill (site H) is classified as unacceptable landfill site i.e. there is an urgent need for a new suitable site for landfill, while Andishe Landfill (site D) is ranked as acceptable landfill site but needs environmental management program to handle the existing weaknesses.     

Improvement of digestibility of sunflower and corn residues by some saprophytic fungi

The in vitro degradation of fiber from two agricultural residues (Helianthus annuus and Zea mays) was studied using four saprophytic fungi. The changes in cellulolytic enzyme and phosphatase activities, the C/N ratio, the dry weight, the crude fiber (CF) content, and the protein and fiber digestibility coefficients were investigated in solid-state culture during a 45-day period of biodegradation. The FPase activity of Phanerochaete chrysosporium and the endoglucanase activities of P. chrysosporium and Trichoderma reesei compared to those of the other fungi were significantly (P < 0.05) high on both crop resides. Both acid and alkaline phosphatases were produced in greater amounts by P. chrysosporium than by the other fungi. The organic carbon contents of both residues were reduced more by T. reesei than by the other fungi. The fiber digestibility coefficient of untreated corn residue was higher than that of sunflower residue, but after treatment with fungi, the sunflower fiber digestibility increased more than that of corn did. Although the CF contents of both residues were decreased more by P. chrysosporium than by T. reesei, the fiber digestibility coefficients of both residues were increased more by T. reesei than by P. chrysosporium. The treatment of both crop residues increased their protein digestibility coefficients significantly compared to the control. The protein digestibility coefficients of both residues were increased more by T. reesei and P. chrysosporium than by the other fungi. In all treatments, the protein digestibility coefficient of sunflower residue was higher than that of corn residue.     

Monitoring,mapping and health risk assessment of fluoride in drinking water supplies in rural areas of Maku and Poldasht,Iran

The aim of this study was to investigate and determine fluoride concentrations in drinking water supplies in rural areas of Maku and Poldasht in West Azerbaijan Province, the northwest of Iran. Fluorosis risk assessment and characterization was also investigated. Fluoride concentrations mapping was accomplished by using the GIS system. Totally, 356 water samples, including one sample in each season, were collected from 89 water supplies providing water for 95 and 61 rural areas of Maku and Poldasht, respectively. According to the results, in Maku and Poldasht, 25 and 30 rural areas had contaminated water sources, respectively. Average annual fluoride concentrations ranged from 3.04 to 7.31 mg/l in the contaminated villages of Maku, which is about 2–4.8 times higher than the maximum standard level of the Iranian drinking water standard, and 4.52–8.21 mg/l in the contaminated areas of Poldasht, which is about 3–5.47 times higher than the maximum standard level. The maximum fluoride level was determined 11.12 mg/l and 10.98 mg/l in one of villages of Maku and Poldasht Counties in summer, respectively. Neither in Maku nor in Poldasht, water resources showed dental cavity risk, while dental fluorosis risk and skeletal fluorosis risk were very significant in some villages of both cities. Children were at most risk of fluorosis. New alternative water supplies for the contaminated villages if possible, consumption of bottled water and application of reverse osmosis are recommended as remedial actions in the contaminated areas.

     

Thermal Stabilization of Recycled PET Through Chain Extension and Blending with PBT

This study investigates the effect of using a multifunctional epoxide chain extender (Joncryl^® ADR 4468) on the thermal stabilization and rheological properties of recycled polyethylene terephthalate (R-PET) and its blends with polybutylene terephthalate (PBT). The R-PET samples were prepared without and with chain extender (CE) contents of 0.4 wt% and 0.8 wt%. R-PET/PBT blends with weight ratios of 75w/25w, 50w/50w and 25w/75w were also prepared without and with a given CE content of 0.2 wt%. The thermal stability of the melt blended samples was analyzed through small amplitude oscillatory shear (SAOS) rheological experiments. The structure of the samples was evaluated using a Fourier transform infrared (FTIR) spectrometer. While the dynamic rheological properties of R-PET were improved with the addition of Joncryl and by blending with PBT, during the SAOS rheological experiments, the complex viscosity of R-PET further increased due to the concurrent polycondensation of R-PET and the resumption of Joncryl reaction with R-PET molecules. These reactions during the rheological experiments were further expedited with increasing the testing temperature. On the other hand, in R-PET/PBT blends, the reactivity of Joncryl was more noticeable in blends with higher R-PET contents due to the higher available internal reactive sites of much shorter R-PET molecules. It was observed that the addition of only 0.2 wt% Joncryl to the blends of R-PET/PBT (75w/25w) dramatically improves the thermal stability and dynamic rheological properties of R-PET and most likely its processability.