Distribution, origin and fate of chromium in soils in Guanajuato, Mexico

Total, hexavalent and trivalent chromium were determined in surface and 30-cm depth soil samples from a highly chromium-polluted area in Guanajuato state, central México. Four samples were also analyzed by a sequential extraction procedure. Nearly 0.9 km(2) out of the 8 km(2) area sampled was polluted with chromium, at concentrations up to 12960 mg kg(-1), mostly as Cr(III). Concentrations of Cr(VI) were lower than 0.5 mg kg(-1) in most sampled points, with the exception of one, where the concentration was found to be 65.14 mg kg(-1). Chromiumcontaining dust from a chromate factory accounted for most of the contamination. The highest concentrations of hexavalent chromium in soil, were in the bottom sediments of an abandoned water reservoir used to store polluted water from a well, before use of the water in the factory process. Tannery wastes, dust from a sanitary landfill of chromate compounds and the transport of chromium products are the sources of chromium at other sites. Chromium is fixed preferentially in the hydrous Fe and Mn oxides in the more polluted soils. Less polluted soils have a high proportion of chromium associated with the sulfide and organic fraction. Cr(III) is retained preferentially in the superficial soil layer. Variations in the physical characteristics of the soil, relative abundance of the various soil components and characteristics of the contaminant source, give rise to differences in chromium soil concentrations with depth.     

Hydrolytic and enzymatic degradation of poly(γ-glutamic acid) hydrogels and their application in slow-release systems for proteins

The hydrolytic and enzymatic degradation of newly developed hydrogels, produced by cross-linking purified poly(-glutamic acid) (PGA) with dihaloalkane compounds, was studied and is reported in this paper. Analysis of hydrolysis of the hydrogel as a function of pH indicated that the hydrolysis occurred slowly at neutral pH, but fast in both acidic and alkaline solutions, while the polymer could be hydrolyzed rapidly only in acidic solutions. The ester bonds were more sensitive to hydrolysis than peptide bonds. The biodegradability of the hydrogel and polymer was further confirmed when enzymatic degradation was studied by three enzymes (cathepsin B, pronase E, and trypsin), which were able to cleave both ester and peptide bonds gradually. A slow-release system for porcine somatotropin (pST) formed by using the hydrogel as matrix to entrap the hormone was evaluatedin vitro andin vivo. Results demonstrated that the hydrogel was able to release the hormone for a period of 20–30 days and indicated its potential application in slow-release systems for bioactive materials, especially macromolecules, such as peptides and proteins.     

Risk factors associated with transcervical CVS losses

Factors found to be associated with pregnancy loss after transcervical CVS were race (higher for non-white), history of spontaneous abortion, unplanned pregnancy, history of spotting or bleeding during the pregnancy prior to CVS, and placental position (higher for fundal or lateral locations). Whether the increase in loss risk is due to the factor, per se, or the factor plus the CVS cannot be determined due to the lack of appropriate control data.     

Cytogenetic results from the U.S. collaborative study on CVS

Cytogenetic data are presented for 11 473 chorionic villus sampling (CVS) procedures from nine centres in the U.S. NICHD collaborative study. A successful cytogenetic diagnosis was obtained in 99.7 per cent of cases, with data obtained from the direct method only (26 per cent), culture method only (42 per cent), or a combination of both (32 per cent). A total of 1.1 per cent of patients had a second CVS or amniocentesis procedure for reasons related to the cytogenetic diagnostic procedure, including laboratory failures (27 cases), maternal cell contamination (4 cases), or mosaic or ambiguous cytogenetic results (98 cases). There were no diagnostic errors involving trisomies for chromosomes 21, 18, and 13. For sex chromosome aneuploidies, one patient terminated her pregnancy on the basis of non-mosaic 47,XXX in the direct method prior to the availability of results from cultured cells. Subsequent analysis of the CVS cultures and fetal tissues showed only normal female cells. Other false-positive predictions involving non-mosaic aneuploidies (n = 13) were observed in the direct or culture method, but these cases involved rare aneuploidies: four cases of tetraploidy, two cases of trisomy 7, and one case each of trisomies 3, 8, 11, 15, 16,20, and 22. This indicates that rare aneuploidies observed in the direct or culture method should be subjected to follow-up by amniocentesis. Two cases of unbalanced structural abnormalities detected in the direct method were not confirmed in cultured CVS or amniotic fluid. In addition, one structural rearrangement was misinterpreted as unbalanced from the direct method, leading to pregnancy termination prior to results from cultured cells showing a balanced, inherited translocation. False-negative results (n = 8) were observed only in the direct method, including one non-mosaic fetal abnormality (trisomy 18) detected by the culture method and seven cases of fetal mosaicism (all detected by the culture method). Mosaicism was observed in 0.8 per cent of all cases, while pseudomosaicism (including single trisomic cells) was observed in 1.6 per cent of cases. Mosaicism was observed with equal frequency in the direct and culture methods, but was confirmed as fetal mosaicism more often in cases from the culture method (24 per cent) than in cases from the direct method (10 per cent). The overall rate of maternal cell contamination was 1.8 per cent for the culture method, but there was only one case of incorrect sex prediction due to complete maternal cell contamination which resulted in the birth of a normal male. The rate of maternal cell contamination was significantly higher in samples obtained by the transcervical sampling method (2. 16 per cent) than in samples obtained by the transabdominal method (0.79 per cent). From these data, it is clear that the culture method has a higher degree of diagnostic accuracy than the direct method, which should not be used as the sole diagnostic technique. The direct method can be a useful adjunct to the culture method, in which maternal cell contamination can lead to incorrect sex prediction and potentially to false-negative diagnostic results.     

Biological solubilization and mineralization as novel approach for the pretreatment of food waste

The performance of a garbage disposal system to solubilize and mineralize food wastes through biological solubilization was evaluated through the examination of the effects of operational conditions like water supply volume, water supply frequency and aeration on the amount of waste solubilized, mineralized and accumulated in the reactor. The biological solubilization process consisted of a solubilization reactor and a circulation tank. Food waste and fresh water were supplied into the solubilization reactor with support media. Wastewater from the solubilization reactor was discharged to the circulation tank and water in the circulation tank was periodically pumped back to the solubilization reactor. In case of the total food waste loading of 16 kg m(3-1) d(-1), little carbon (0-5.7%) accumulated in the reactor as long as the system was kept under aerobic condition through large volume of water supply (higher than 3.5 lh(-1)) or applying aeration in the circulation tank. However, 42% of the loaded carbon accumulated under anaerobic condition in low water supply (less than 1.8 lh(-1)). The rest of the waste was either solubilized or mineralized. The aeration in the circulation tank, therefore, was effective to provide similar solubilization and mineralization as the large volume of water supply. However, frequency of feeding at the large volume of water supply had no significant effect on the amount of waste solubilization and mineralization.     

Metal Contamination of Sediments and Soils of Bayou Saint John: A Potential Health Impact to Local Fishermen?

This research examines the pattern of sediment contamination of an urban bayou of New Orleans (formerly a natural waterway) and the potential for human exposure from consumption of fish caught in the bayou. Sediments and soils of Bayou Saint John were evaluated for lead (Pb), zinc (Zn), and cadmium (Cd). Sediment cores were collected at bridges (n = 130) and sites between the bridges (n = 303) of the bayou. In addition, soil samples (n = 66) were collected along the banks of the bayou. Sediments below the bridges contain significantly more (p-value approximately 10(-7)) Pb and Zn (medians of 241 and 230 mg kg(-1), respectively) than bayou sediments located between bridges (medians of 64 and 77 mg kg(-1), respectively). Sediments below bridges of the upper reaches of the bayou contain significantly larger amounts of metals (p < 10(-14) for Pb and Zn and p approximately 10(-8) for Cd) (medians of 329, 383 and 1.5, respectively) than sediments below bridges in the lower reaches of the bayou (medians of 43, 31 and 0.5 for Pb, Zn and Cd, respectively). Likewise, medians for sediments located between bridges contain significantly (p < 10(-14)) higher quantities of Pb, Zn and Cd (170, 203 and 1.8 mg kg(-1), respectively) in the upper bayou than Pb, Zn, and Cd (48, 32, and 0.8 mg kg(-1), respectively) in the lower reaches of the bayou. The potential risk for human exposure may be magnified by the fact that fishing generally occurs from the numerous bridges that cross the bayou. Poor and minority people do most of the fishing. Most people (87%) indicated they ate fish they caught from the Bayou.     

Heterogeneous electro-Fenton process for degradation of bisphenol A using a new graphene/cobalt ferrite hybrid catalyst

Environmental Science and Pollution Research - A simple, efficient, environmentally friendly, and inexpensive synthesis route was developed to obtain a magnetic nano-hybrid (GH) based on graphene...     

Removal of a red dye using noncommercial peroxidase extracted from rice bran

The present study investigates the application of a noncommercial peroxidase enzyme, which was extracted from rice bran, to decolorize wastewater that was simulating effluent from a textile manufacturer using a red dye in its coloration process.     

Identification of protein biomarkers of mercury toxicity in fish

Bioaccumulative metals such as mercury are found in increasing amounts in fish and their consumers. In the region of the Madeira River, in the Brazilian Amazon, mercury (Hg) is a predominant contaminant in the aquatic ecosystem. There is therefore a need to find specific biomarkers of mercury toxicity in fish to monitor contaminations. Here, mercury-bound proteins were identified in the liver tissues of fishes Mylossoma duriventre and Brachyplatystoma rousseauxii. Mercury was quantified in liver tissue, pellets and protein spots by graphite furnace atomic absorption. Proteins were fractionated by two-dimensional polyacrylamide gel electrophoresis and identified by mass spectrometry with electrospray ionization. We identified nine proteins linked to mercury and that presented biomarker characteristics of mercury. Among the proteins identified, isoforms of parvalbumin, ubiquitin-40S ribosomal protein S27a, brain-specific angiogenesis inhibitor 1-associated protein 2-like protein 2 and betaine–homocysteine S-methyltransferase 1 are notable for having the molecular function of binding to metallic ions.     

Effect of ceramic industrial particulate emission control on key components of ambient PM10

The relationship between specific particulate emission control and ambient levels of some PM₁₀ components (Zn, As, Pb, Cs, Tl) was evaluated. To this end, the industrial area of Castellón (Eastern Spain) was selected, where around 40% of the EU glazed ceramic tiles and a high proportion of EU ceramic frits are produced. The PM₁₀ emissions from the ceramic processes were calculated over the period 2000–2006, taking into account the degree of implementation of corrective measures throughout the study period. Abatement systems were implemented in the majority of the fusion kilns for frit manufacture in the area as a result of the application of the Directive 1996/61/EC, leading to a marked decrease in PM₁₀ emissions. By contrast, emissions from tile manufacture remained relatively constant because of the few changes in the implementation of corrective measures. On the other hand, ambient PM₁₀ levels and composition measurements were carried out from 2002 to 2006. A high correlation between PM₁₀ emissions from frit manufacture and ambient levels of Zn, As, Pb and Cs (R² from 0.61 to 0.98) was observed. On the basis of these results, the potential impact of the implementation of corrective measures to reduce emissions from tile manufacture was quantified, resulting in a possible decrease of 3–5 μg/m³ and 2 μg/m³ in ambient mineral PM₁₀ (on an annual basis) in urban and suburban areas, respectively. This relatively simple methodology allows us to estimate the direct effect of a reduction in primary particulate emissions on ambient levels of key particulate components, and to make a preliminary quantification of the possibilities of air quality improvement by means of further emission reduction. Therefore, it is a useful tool for developing future air quality plans in the study area and in other industrialised areas.