Development of regenerative dye impregnated mesoporous silica materials for assessing exposure to ammonia

The mesostructured materials MCM-41 and SBA-15 were studied as possible supports of bromocresol green (BG) dye impregnation for the ammonia gas detection because of their large surface area, high regenerative property, and high thermal stability. X-ray diffraction, transmission electron microscopy, scanning electron microscope, and N₂ adsorption analysis were used to characterize the prepared materials. These materials could sense ammonia via visible color change from yellowish-orange to blue color. The color change process of the nanostructured materials was fully reversible during 10 cyclic tests. The results indicated that the ammonia absorption responses of the two nanostructured materials were both very sensitive, and high linear correlation and high precision were achieved. As the gaseous ammonia concentrations were 50 and 5 ppmv, the response times for the SBA-15/BG were only 1 and 5 min, respectively. Moreover, the BG dye-impregnated SBA-15 was less affected by the variation in the relative humidity. It also had faster response for the detection of NH₃, as well as lower manufacturing price as compared to that of the dye-impregnated MCM-41. Such feature enables SBA-15/BG to be a very promising material for the detection of ammonia gas.

Implications: The detector tube is a convenient ambient ammonia detection device. However, almost all the commercial detector tubes can be used once only, which not only increases the purchase cost but also produces lots of waste. In this study, we developed two sensing materials that are sensitive for repeated usage. The two mesoporous silica-based materials, MCM-41 and SBA-15, are impregnated by an organic dye of bromocresol green to induce color change behavior that can be easily observed by the naked eye, and it is concluded that dye-impregnated SBA-15/BG is a very promising material for the detection of ammonia gas.     

Background levels of Persistent Organic Pollutants in humans from Taiwan: Perfluorooctane sulfonate and perfluorooctanoic acid

Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) have recently received attention due to their widespread contamination of the environment. PFOS and PFOA are stable in the environment and resistant to metabolism, hydrolysis, photolysis and biodegradation. PFOS and PFOA have been found in human blood and tissue samples from both occupationally exposed workers and the general worldwide population. This study aimed to determine the background levels of PFOS and PFOA in the Taiwanese population, investigate related factors, and compare exposure in Taiwan to that in other countries. The concentration of PFOS in the 59 serum samples collected from the general population in Taiwan ranged from 3.45 to 25.65 ng mL⁻¹ (median: 8.52), and the concentration of PFOA ranged from 1.55 to 7.69 ng mL⁻¹ (median: 3.22). There was a significant positive correlation (r = 0.51; p < 0.0001) between PFOS and PFOA concentrations. Males had higher concentrations of PFOA and PFOS than females. PFOS levels in serum increased with age. This study is the first investigation to reveal the PFOS and PFOA levels of serum samples in the general population of Taiwan. The levels of PFOS and PFOA in Taiwanese serum samples were comparable with those from other countries (PFOS: 5.0–35 ng mL⁻¹, PFOA: 1.5–10 ng mL⁻¹).     

Characteristic Study of Ambient Air Total Gaseous Mercury (TGM) Concentrations During Rainy and Non-Rainy Periods at a Traffic Site in Taiwan

This investigation studied the concentrations of ambient air total gaseous mercury (TGM) during the rainy periods at the Hung-Kuang traffic sampling site in central Taiwan from May 26 to June 16, 2014. The results were compared with those of a previous study for ambient air TGM during non-rainy daytime and nighttime periods at the Hung-Kuang traffic sampling site, which was conducted during March 21 to July 20, 2012. The observed mean concentration of ambient air TGM was 1.16 ng/m³ during the rainy periods at the Hung-Kuang traffic sampling site. The mean ambient air TGM concentrations were higher in the non-rainy sampling period in daytime than in the rainy sampling period from this study. The mean ratio of non-rainy sampling period in daytime to that of rainy sampling period for ambient air TGM were 3.15. Furthermore, the mean ambient air TGM concentrations were higher in the non-rainy sampling period in nighttime in than in the rainy sampling period for this study. The mean rations for non-rainy sampling period in nighttime to that of the rainy sampling period for ambient air TGM were 2.70. The results obtained in this study also revealed that the ambient air TGM concentrations during the rainy period had the lowest concentrations when compared with the other sampling sites in other world regions.     

Validation of in-situ measurements of volatile organic compounds through flask sampling and gas chromatography/mass spectrometry analysis

Continuous monitoring of ambient non-methane hydrocarbons (NMHCs) by automated gas chromatographs equipped with flame ionization detection (termed in-situ GC/FID) with hourly data resolution was instated in ozone non-attainment areas throughout Taiwan. Performance of these on-site in-situ GCs was validated by manual flask sampling, as well as by in-lab gas chromatography/mass spectrometry (GC/MS) analysis. More than 50 VOCs from C₂ to C₁₁ were analyzed by both methods. Ninety flask samples were collected in series near an in-situ GC monitoring station in order to closely compare with the in-situ measurements. Both time-series and scatter plots from the two methods are displayed and discussed. It was found that over-simplified, un-humidified single-point calibration leading to surface loss was responsible for the bias in the in-situ method, resulting in greater error in accuracy as VOC volatility decreased. Although this over-estimate of the concentrations was found across all target VOCs, both methods were able to consistently capture the variability of ambient VOCs, with R² values greater than 0.9 for most of the major VOCs.     

Carbonyl species characteristics during the evaporation of essential oils

Carbonyls emitted from essential oils can affect the air quality when they are used in indoors, especially under poor ventilation conditions. Lavender, lemon, rose, rosemary, and tea tree oils were selected as typical and popular essential oils to investigate in terms of composition, thermal characteristics and fifteen carbonyl constituents. Based on thermogravimetric (TG) analysis, the activation energy was 7.6–8.3 kcal mol^?1, the reaction order was in the range of 0.6–0.7 and the frequency factor was 360–2838 min^?1. Formaldehyde, acetaldehyde, acetone, and propionaldehyde were the dominant carbonyl compounds, and their concentrations were 0.034–0.170 ppm. The emission factors of carbonyl compounds were 2.10–3.70 mg g^?1, and acetone, propionaldehyde, acetaldehyde, and formaldehyde accounted for a high portion of the emission factor of carbonyl compounds in essential oil exhaust. Some unhealthy carbonyl species such as formaldehyde and valeraldehyde, were measured at low-temperature during the vaporization of essential oils, indicating a potential effect on indoor air quality and human health.     

Biogeochemical reductive release of soil embedded arsenate around a crater area (Guandu) in northern Taiwan using X-ray absorption near-edge spectroscopy

This study investigates biogeochemical reductive release of arsenate from beudantite into solution in a crater area in northern Taiwan,using a combination of X-ray absorption near-edge structure (XANES) and atomic absorption spectrometry.Total arsenic (As) concentrations in the soil were more than 200 mg/kg.Over four months of laboratory experiments,less than 0.8% As was released into solution after reduction experiments.The 71% to 83% As was chemically reduced into arsenite (As(III)) and partially weathering into the soluble phase.The kinetic dissolution and re-precipitation of As,Fe,Pb and sulfate in this area of paddy soils merits further study.     

Microbial dechlorination of 2,4,6-trichlorophenol in anaerobic sewage sludge

The dechlorination of 2,4,6-trichlorophenol (TCP) in municipal sewage sludge with a chlorophenol (CP)-adapted consortium was investigated. Results show that dechlorination rates differed according to the source of the sludge samples used in the batch experiments. No significant differences in 2,4,6-TCP dechlorination were observed following treatment with inoculum at densities ranging from 10% to 50% (V/V), but a significant delay was noted at 5% (V/V) density. Overall, results show that the higher the 2,4,6-TCP concentration, the slower the dechlorination rate. The addition of acetate, lactate, pyruvate, vitamin B12 or manganese dioxide did not results in a significant change in 2,4,6-TCP dechlorination. Data collected from a bioreactor experiment revealed that pH 7.0 and a total solid concentration of 10 g/L were optimal for dechlorination. Dechlorination rates decreased significantly at higher agitation speeds. 2,4,6-TCP dechlorination was enhanced under methanogenic conditions, but it was inhibited under denitrifying and sulfate-reducing conditions.     

Effects of polyelectrolytes on reduction of model compounds via coagulation

The objective of this research work was to evaluate the performance of enhanced coagulation by alum and polymer. Synthetic source waters containing high molecular weight humic acids, medium molecular weight tannic acids and low molecular weight p-hydroxybenzoic acid were formulated by adjusting the concentration of turbidity and pH; and jar tests were used to study the effect of various types and dosages of polymer on reducing the above model compounds. At a specific pH condition, the applied alum dosage would efficiently decrease the turbidity to 2 NTU follows the order: humic>tannic>p-hydroxybenzoic acid. Adjustment of pH influenced the performance of alum obviously but not of p-DADMAC. High p-DADMAC dosage overwhelming the effects of alum is less affected by pH adjustment. The results of this investigation reveal that enhanced coagulation with p-DADMAC was founded to be very effective for removing high-molecular-weight THM precursors, i.e., humic acid and tannic acid, and markedly reduced the alum dosages required for turbidity removal. The other two polymers, i.e., cationic PAM and non-ionic PAM, which had higher molecular weight but lower charge density than p-DADMAC, were not capable of removing organic precursors. It was thus concluded that enhanced coagulation with polymer, p-DADMAC, could be considered as a promising technique for removal of NOMs with hydrophobic and higher-molar-mass (>1K) in water treatment plants.     

Filtration of fly ash using a fluidized-bed filter

This study focuses on the control of particulates with a fluidized-bed filter in exhaust gas stream. The fluidized-bed filter classified in the granular bed filtration technology was employed to demonstrate the performance for removal of fly ash at indicated operating velocities, fixed bed heights, and bed temperatures; then the collecting mechanisms of particulates by fluidized-bed filter were studied. The size distribution of fly ash passing through the fluidized-bed filter was also analyzed. The results indicate that at higher operating velocities and fixed bed heights, the removal of fly ash is more efficient and inertial impaction is the main mechanism when the fluidized-bed is operated at room temperature (25 degrees C). While operating at higher temperatures (200 degrees C), efficiency of 93.2% to 99.4% can be achieved for submicron particles. It is supposed to be the diffusion mechanism that is responsible for collecting such small particles, and high temperature is a favorable condition because of diffusion.