Assessment of urban sustainability efficiency based on general data envelopment analysis: a case study of two cities in western and eastern China

Sustainable urban development focuses on enhancing urban well-being, while also balancing the demands of urban social and economic development, natural resource consumption, and environmental pollution. This work used general data envelopment analysis to assess the urban sustainability efficiency (USE) and sustainability potential (SP) in Lanzhou and Xiamen, two cities that are characteristic of urban areas in western and eastern China. The assessment indicator system included important natural and urban welfare factors as input and output indices, respectively. The results showed that overall urban sustainability efficiency increased in Lanzhou and Xiamen from 1985 to 2010, but that the sustainability of natural resources clearly decreased. The urban sustainability efficiency of Xiamen was higher than that of Lanzhou, and the sustainability potential of Xiamen was lower than that of Lanzhou; this indicates that Xiamen performed better in terms of urban sustainable development. The urban sustainability efficiency in Xiamen has increased with increasing urban population, and the rate and scale of economic development have been higher than in Lanzhou. The assessment and analysis performed in this study show that cities with different natural resources and development characteristics have different forms, patterns, and trajectories of sustainable development.     

Direct measurements of the drag force over aligned arrays of cubes exposed to boundary-layer flows

Wind tunnel measurements of the total drag force for aligned arrays of cubes exposed to two different boundary-layer flows at three flow velocities are discussed. The drag force for eight different building packing densities λ _p (from 0.028 to 1) is measured with a standard load cell generating a novel dataset. Different λ _p are reproduced by increasing the number of buildings on the same lot area; this represents a real situation that an urban planner is faced with when a lot area of a given (fixed) size is allocated to the development of new built areas. It is assumed that the surrounding terrain is uniform and there is a transition from a given roughness (smooth) to a new roughness (rough). The approaching flow will adjust itself over the new surface within a distance that in general may be larger than the horizontal length covered by the array. We investigate the region where the flow adjustment occurs. The wide range of packing densities allowed us to analyse in detail the evolution of the drag force. The drag force increases with increasing packing densities until it reaches a maximum at an intermediate packing density (λ _p  = 0.25 in our case) followed by a slight decrease at larger packing densities. The value of the drag force depends on the flow adjustment along the array which is evaluated by introducing the parameter “drag area” to retrieve information about the drag distribution at different λ _p . Results clearly suggest a change of the distribution of the drag force, which is found to be relatively uniform at low packing densities, while most of the force acts on first rows of the arrays at large packing densities. The drag area constitutes the basis for the formulation of a new adjustment length scale defined as the ratio between the volume of the air within the array and the drag area. The proposed adjustment length scale automatically takes into account the change in drag distribution along the array for a better parameterization of urban effects in dispersion models.     

A techno-economic comparison of fluidized bed gasification of two mixed plastic wastes

A comparison between the most promising design configurations for the industrial application of gasification based, plastics-to-energy cogenerators in the 2-6 MWe range is presented. A pilot scale bubbling fluidized bed air gasifier, having a feeding capacity of 100 kg/h, provided experimental data: the syngas complete composition, the characterization of the bed material, the entrained fines collected at the cyclone and the purge material from the scrubber. Mass and energy balances and material and substance flow analyses have been therefore drawn to assess and compare design solutions utilizing two mixed plastic wastes (MPW) obtained from separate collection of plastic packaging, after different levels of pre-treatments. The related techno-economic performances have been finally estimated on the basis of the manufacturer’s specifications. The study concludes that the MPW obtained after a very simple pre-treatment and fed to a gasifier coupled with a steam turbine is the solution that currently offers the higher reliability and provides the higher internal rate of return for the investigated range of electrical energy production.     

拟开发场地的土壤重金属污染调查与评价实践

土壤污染调查乃"土壤修复"的前期。在某市郊拟开发建设的场地,按8个点分三层采集了24个土壤样品,用原子吸收光谱法测定样品中汞、铅、镉、铜、锌、镍、铬等7种重金属元素的含量,汞呈现对数正态分布,其他元素为正态分布,各元素在土壤层水平分布状态和垂直分布水平的差异性不显著,锌含量水平现状值在《土壤环境质量标准》GB15618-1995二级标准的指标限值内,汞、铅、镉、铜、镍、铬含量水平现状值均在土壤环境质量一级标准的指标限值内,且各元素浓度水平现状值均与场地所在区域土壤背景值一致。由此,本调查的场地土壤环境现状没有受到铅、汞、镉、铜、锌、镍、铬金属元素污染。     

武安市土地利用结构信息熵时空变化分析

分析土地利用结构时空变化是研究区域土地利用优化配置的重要途径之一.基于信息熵理论,以河北省武安市为例,对1996-2006年的土地利用结构信息熵变化以及2006年各乡(镇)信息熵差异进行研究,同时运用主成分分析法对信息熵变化的驱动力进行分析.结果表明,武安市土地利用结构信息熵持续增长,土地利用结构均衡度较高;2006年各乡镇信息熵差异较大,可划分成3种类型区;经济因素和人口流动因素是信息熵变化主要驱动力.     

Sustainability prioritization of sewage sludge to energy scenarios with hybrid-data consideration: a fuzzy decision-making framework based on full consistency method and fusion ranking model

Environmental Science and Pollution Research - This work proposed a novel mathematical framework for the sustainability assessment of sewage sludge to energy (SStE) scenarios, by resorting to fuzzy...     

Urban carbon emission intensity under emission trading system in a developing economy: evidence from 273 Chinese cities

Environmental Science and Pollution Research - The international community has generally recognized the key role of developing countries’ cities in reducing carbon emissions, an elemental way...     

Combined toxic impacts of thiamethoxam and four pesticides on the rare minnow (Gobiocypris rarus)

To examine pesticide mixture toxicity to aqueous organisms, we assessed the single and combined toxicities of thiamethoxam and other four pesticides (chlorpyrifos, beta-cypermethrin, tetraconazole, and azoxystrobin) to the rare minnow (Gobiocypris rarus). Data from 96-h semi-static toxicity assays of various developmental phases (embryonic, larval, juvenile, and adult phases) showed that beta-cypermethrin, chlorpyrifos, and azoxystrobin had the highest toxicities to G. rarus, and their LC₅₀ values ranged from 0.0031 to 0.86 mg a.i. L^?1, from 0.016 to 6.38 mg a.i. L^?1, and from 0.39 to 1.08 mg a.i. L^?1, respectively. Tetraconazole displayed a comparatively high toxicity, and its LC₅₀ values ranged from 3.48 to 16.73 mg a.i. L^?1. By contrast, thiamethoxam exhibited the lowest toxic effect with LC₅₀ values ranging from 37.85 to 351.9 mg a.i. L^?1. Rare minnow larvae were more sensitive than embryos to all the pesticides tested. Our data showed that a pesticide mixture of thiamethoxam–tetraconazole elicited synergetic toxicity to G. rarus. Moreover, pesticide mixtures containing beta-cypermethrin in combination with chlorpyrifos or tetraconazole also had synergetic toxicities to fish. The majority of pesticides are presumed to have additive toxicity, while our data emphasized that the concurrent existence of some chemicals in the aqueous circumstance could cause synergetic toxic effect, leading to severe loss to the aqueous environments in comparison with their single toxicities. Thence, the synergetic impacts of chemical mixtures should be considered when assessing the ecological risk of chemicals.

     

Biodegradable microplastics (BMPs): a new cause for concern?

Environmental Science and Pollution Research - With the increasingly serious pollution of plastics, biodegradable plastics (BDPs) have attracted attention as a new material that can replace...     

陕北黄土丘陵区不同土地利用方式下土壤碳剖面分布特征

黄土高原土层深厚,土壤剖面碳存储受土地利用方式影响明显.为探讨不同土地利用方式对深层土壤碳分布的影响,研究了人工经济林地(陕北米脂)、退耕还林地(神木)和防风固沙林地(榆林榆阳区)0~20.0 m土壤有机碳(SOC)和无机碳(SIC)的分布特征和差异.结果表明,在不同土地利用方式下SOC含量:矮化枣树(2.00 g·kg~(-1))未矮化枣树(1.54 g·kg~(-1))柠条林(0.97 g·kg~(-1))退化人工草地(0.81 g·kg~(-1))樟子松林(0.70 g·kg~(-1))荒草地(0.45 g·kg~(-1)),且各剖面之间SOC含量存在显著性差异(P0.05).在不同土地利用方式下SIC含量:矮化枣树(11.66 g·kg~(-1))≥未矮化枣树(11.59g·kg~(-1))柠条林(9.62 g·kg~(-1))退化人工草地(8.07 g·kg~(-1))樟子松林(4.32 g·kg~(-1))荒草地(0.47 g·kg~(-1));人工经济林和退耕还林(草)样地内所有土壤剖面之间SIC含量无显著性差异;人工经济林、退耕还林(草)剖面和防风固沙林地剖面SIC含量存在显著性差异(P0.05).矮化枣树、未矮化枣树、柠条林、退化人工草地、樟子松林和荒草地土壤剖面无机碳密度分别是有机碳密度的6.19、7.71、10.80、10.78、5.91和1.03倍.综上可见,不同土地利用方式之间土壤碳储量存在明显差异,无机碳的含量远高于有机碳.