Protective effect of different types of bicycle helmets

The effectiveness of bicycle helmets in preventing head injuries is well documented. There are different opinions about the effectiveness of helmets in preventing face injuries, and few studies have analyzed the effect of different types of helmets. This study was performed to examine the effect of different helmet types to head and face injuries. The use of helmets was analyzed in cyclists with head or face injuries and compared with two control groups. The main control group was cyclists that had injuries not including the head or neck, and another control group was cyclists that had been involved in an accident, regardless of whether they had sustained any injury. Cross-table and logistic regression analyses were applied to analyze the protective effect of helmets. A total of 991 injured patients served as a basis for this study. Most of the accidents, (82%) were single accidents with no other persons involved. Of patients with injuries to the head, excluding face, 11.4% had been using hard shell helmets, and 9.6% had been using foam helmets at the time of the accident. Among the emergency room controls, the proportion of hard shell helmet users and foam helmet users was 26.4% and 11.4%, respectively. Compared to non-helmet users, this gave an odds ratio of 0.36 (CI = 0.21-0.60) for getting head injuries if the cyclists had been using hard shell helmets at the time of the injury, and 0.83 (CI = 0.41-1.67) for users of foam helmets. The odds ratio for getting face injuries was 0.90 (CI = 0.58-1.41) among users of hard shell helmets, and 1.87 (CI = 1.03-3.40) for users of foam helmets. The use of hard shell helmets reduced the risk of getting injuries to the head. Children less than nine years old that used foam helmets had an increased risk of getting face injuries. All bicyclists should be recommended to use hard shell bicycle helmets while cycling.     

Transport and degradation of toluene and o-xylene in an unsaturated soil with dipping sedimentary layers

A lysimeter trench was established at the Gardermoen delta (50 km north of Oslo, Norway) to study the flow of water and transport and degradation of aromatic jet fuel components (toluene and o-xylene) in the undisturbed unsaturated zone. Site investigations with ground-penetrating radar revealed the presence of dipping sedimentary layers within the foreset unit. This study has shown that the foreset bed of the Gardermoen delta structure provided a preferential flow path for the transport of the solute plumes, but did not have dramatic effects on the degradation potential under the current conditions. The degradation potential for toluene and o-xylene in the unsaturated zone at Gardermoen was very high and almost all of the injected hydrocarbons were biodegraded before reaching the saturated zone. However, the horizontal displacement of the plume showed that knowledge about sedimentary structures in the unsaturated zone is important for a sufficient monitoring of contaminant transport and for remediation purposes. Carbon dioxide and O2 were measured in situ simultaneously with extraction of water samples, and indicated aerobic biodegradation of toluene and o-xylene. Overall, first-order degradation coefficients were calculated to be in the range of 0.19 to 0.21 d(-1) and 0.10 to 0.11 d(-1) for toluene and o-xylene, respectively.     

Sorption of polycyclic aromatic compounds to humic and fulvic acid HPLC column materials

Two different humic acids (HA) and a fulvic acid (FA) were chemically immobilized to a high performance liquid chromatography (HPLC) silica column material. The immobilization was performed by binding amino groups in HA/FA to the free aldehyde group in glutardialdehyde attached to the silica gel. The HPLC column materials were compared with a blank column material made by applying the same procedure but without immobilizing HA or FA. Also, a column was made by binding carbonyl groups in HA to amino groups attached to the silica gel. The humic substances were selected to secure appropriate variation of their structural features. The retention factors of 45 polycyclic aromatic compounds (PAC) to the four columns were determined by HPLC. The advantage of the technique is a large number of compounds can easily be studied. The binding procedure does not appear to cause a drastic selection between the HA molecules. The k' values obtained for the two Aldrich HA columns agree in general reasonably. The retention or sorption of the compounds increased with the size of the PAC and the number of lipophilic substituents, but decreased when polar substituents were present. The PAC retention was much stronger to the two HA columns than to the FA and blank column, both for hydrophobic polycyclic aromatic hydrocarbons (PAH) and the polar PAC. Other factors impacting the PAC binding may be specific interactions with HA and the ionic strength of the aqueous phase. The technique has been applied to do direct determinations of Koc.     

The influence on partial order ranking from input parameter uncertainty. Definition of a robustness parameter

The method of partial order ranking has been used within the environmental area for a variety of purposes as an attractive way of handling complex information. However, the environmental data are often associated with a significant degree of uncertainty. In this investigation the general nature of the influence from data uncertainty on the partial order ranking is analyzed. A Monte Carlo type analysis is performed in which a series of randomly formed data are used to test the influence of data uncertainty. The partial order ranking is interpreted, where the results are transferred to a one-dimensional ranking scale taking into account that not all elements are ranked with the same certainty. A simple general robustness parameter (E) in form of the expected number of comparisons for each ranking element is defined and correlated to the uncertainty analysis results. A simple equation relates E to the number of elements and the number of parameters, respectively. The magnitude of the ranking uncertainty is shown to increase rapidly when the E value decreases below 4-5 comparisons per element. When the E value exceeds 5 the ranking uncertainty becomes nearly constant and independent on the actual E value.     

Democracy at its Best? The Consensus Conference in a Cross-national Perspective

Over recent decades, public participation in technology assessment has spread internationally as an attempt to overcome or prevent societal conflicts over controversial technologies. One outcome of this new surge in public consultation initiatives has been the increased use of participatory consensus conferences in a number of countries. Existing evaluations of consensus conferences tend to focus on the modes of organization, as well as the outcomes, both procedural and substantial, of the conferences they examine. Such evaluations seem to rest on the assumption that this type of procedure has universally agreed goals and meanings, and that therefore consensus conferences can readily be interpreted and applied across national boundaries. This article challenges this approach to consensus conferences. The core of the article is a study of national differences in ideas about what constitutes legitimate goals for participatory arrangements. The study looks at three consensus conferences on GMOs, which took place in France, Norway, and Denmark. Drawing on this study, the article discusses the ways in which interpretations of the concept of participation; the value attributed to lay knowledge vs. technical expertise; as well as ideas about the role of the layperson, are all questions that prompt entirely different answers from country to country. Further, the article analyses these national differences within a theoretical framework of notions of democratic legitimacy.     

Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998–2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected for analysis and risk assessment. The levels of contaminants in the samples from the official control were below maximum limits from EU regulations with only a few exceptions in the following groups; dioxins and dioxin-like polychlorobiphenyls (PCBs) in fish-containing byproducts and dioxins in vegetable and animal fat, hydrogen cyanide in linseed, and cadmium in sunflowers. The levels of pesticides and mycotoxins in the additionally collected samples were below maximum limits. Enniatin B (ENN B) was present in all DDGS samples. The hypothetical cases of carry-over of contamination from these byproducts were designed assuming total absorption and accumulation of the ingested contaminant in meat and milk and high exposure (a byproduct formed 15–20% of the feed ration depending on the species). The risk assessment was refined based on literature data on metabolism in relevant animal species. Risk assessment of contaminants in byproducts is generally based on a worst-case approach, as data on carry-over of a contaminant are sparse. This may lead to erroneous estimation of health hazards. The presence of ENN B in all samples of DDGS indicates that potential impact of this emerging mycotoxin on feed and food safety deserves attention. A challenge for the future is to fill up gaps in toxicological databases and improve models for carry-over of contaminants.     

Crushed concrete as a phosphate binding material: a potential new management tool

To avoid eutrophication of receiving waters, effective methods to remove P in urban and agricultural runoff are needed. Crushed concrete may be an effective filter material to remove dissolved and particulate P. Five types of crushed concrete were tested in the laboratory to evaluate the retention capacity of dissolved P. All types removed P very effectively (5.1-19.6 g P kg(-1) concrete), while the possible release of bound P varied between 0.4 and 4.6%. The retention rate was positively related to a decreasing concrete grain size due to an increasing surface area for binding. The P retention was also related to a marked increase in pH (up to pH 12), and the highest retention was observed when pH was high. Under these circumstances, column experiments showed outlet P concentrations <0.0075 mg P L(-1). Furthermore, experiments revealed that release of heavy metals is of no importance for the treated water. We demonstrate that crushed concrete can be an effective tool to remove P in urban and agricultural runoff as filter material in sedimentation/infiltration ponds provided that pH in the treated water is neutralized or the water is diluted before outlet to avoid undesired effects caused by the high pH.     

The value of the environment – Is it a matter of approach?

This paper discusses why estimates of the benefits of reduced air pollution differ in accordance with the approach used. Estimates based on bottom-up studies of the damage costs related to air pollution usually turn out much lower than estimates based on assessments of the utility of reduced air pollution, obtained for instance by willingness to pay assessments. This is usually explained by the fact that the willingness to pay approach includes the utility aspect of non-market values, and for this reason, it is often preferred to the damage cost approach. This is, however, not the whole story. The paper shows why alternative approaches should not be considered as being in conflict, but rather as means to get supplementary information necessary to put a value on environmental quality. Information from bottom-up assessments of damage costs and from studies of the willingness to pay is used in a macroeconomic model to carry out an evaluation of the social costs of energy saving measures in Hungary.     

A matter of approach: the retort's potential to reduce mercury consumption within small-scale gold mining settlements in Tanzania

The mercury-based gold extraction processes prevalent within small-scale mining are both efficient and harmful. While ensuring relatively high levels of gold recovery, they cause environmental and health problems for people living within mining settlements. This mercury consumption can be minimized by using a simple mercury recycling device known as a retort. While mining legislation in Tanzania dictates the use of retorts for gold recovery, virtually no miners use them, indicating the inadequacy of previous introduction attempts. During action research, retorts were introduced in two mining settlements through a thorough and participatory approach. Twenty miners were given retorts and their attitudes and receptiveness to them were studied. Of the recipients, 18 used the retorts over a period of five months, recycling 10 kilos of mercury. Less mercury was spilled into the environment and miners saved money normally spent on purchasing mercury. The findings have implications for the strategies of development interventions targeting mercury-instigated problems within small-scale gold mining.