Variations in some environmental characteristics including C and N stable isotopic composition of suspended organic matter in the Mandovi estuary

Chemical and isotopic (??¹³C and ??¹⁵N) investigation of the Mandovi estuary along the Indian west coast affected strongly by the seasonal monsoon cycle was carried out. The Mandovi estuary is a major waterway for Goa and extensively used for transportation of iron and manganese ore. In addition, with large population centers as well as agricultural fields located on its shores, the estuary is assumed to have been influenced by human activities. Measurements of chemical and isotopic parameters made in the lower part of the estuary during the southwest (SW) monsoon and post-monsoon seasons reveal distinct changes, and it is observed that despite considerable enrichment of macronutrients during the SW monsoon, productivity of the estuary (phytoplankton biomass), as inferred from the chlorophyll-a content, is not as high as expected. This is due to occurrences of high turbidity and cloud cover that limits photosynthetic productivity. The isotopic characterization (C and N isotopes) of suspended organic matter produced/transported during the monsoon and post-monsoon seasons of year 2007 provides a baseline dataset for future isotopic studies in such type of tropical estuaries.     

Bioaccumulation of Selenium by the Bryophyte Hygrohypnum ochraceum in the Fountain Creek Watershed, Colorado

Aquatic bryophytes, Hygrohypnum ochraceum, were deployed “in situ” at 14 sites in the Fountain Creek Watershed, spring and fall, 2007 to study selenium (Se) accumulation. Dissolved, total, and pore (sediment derived) water samples were collected and water quality parameters determined while plants were exposed to the water for 10?days. There was a trend showing plant tissue-Se uptake with distance downstream and we found a strong correlation between Se in the water with total hardness in both seasons. There was a modest association between Se-uptake in plants with hardness in the spring of 2007 but not the fall. Plants bioconcentrated Se from the water by a factor of 5.8?×?10³ at Green Mountain Falls and 1.5?×?10⁴ at Manitou Springs in the fall of 2007. Both are examples of the bioconcentration abilities of the plants, primarily in the upper reaches of the watershed where bioconcentration factors were highest. However, the mean minima and maxima of Se in the plants in each of the three watershed segments appeared similar during both seasons. We found direct relationships between the pore and dissolved Se in water in the spring (R ²?=?0.84) and fall (R ²?=?0.95) and dissolved Se and total hardness in the spring and fall (R ²?=?0.92). The data indicate that H. ochraceum was a suitable indicator of Se bioavailability and Se uptake in other trophic levels in the Fountain Creek Watershed based on a subsequent study of Se accumulation in fish tissues at all 14 sites.     

PVA降解菌的复配组合及其紫外诱变处理的研究

对已筛选出的4株PVA降解菌进行不同的组合后测定PVA降解率,发现Z5与Z8菌株混合后在1周内对PVA的去除率达到了所有组合中的最高值52.07%,比单菌株提高了约22%。采用紫外照射的方法对混合菌进行诱变并利用正交实验研究其特性,结果表明,诱变后的混合菌在1周内降解了91.46%的PVA,并且碳源浓度对酶活的影响最为显著。当pH为7,碳源、氮源含量分别为1.5 g/L、0.6 g/L,NaC l浓度为1.5 g/L时,诱变菌株处于最佳生长状态。     

厌氧流化床微生物燃料电池及其串并联性能

在高650 mm、有效容积1 280 mL的液固厌氧流化床单室无膜空气阴极微生物燃料电池(MFC)中,研究了燃料电池串并联产电和有机污水处理性能,同时考察了电极面积、活性炭装填体积、温度等因素对产电性能的影响。结果表明,将燃料电池串联,总电压等于3个单级电池的电压之和,约为2 100 mV,最大功率为0.12 mW,而单级电池最大功率为0.05 mW。并联时,输出电压为800 mV,和单级电池输出电压大体相当,而电流为单级电流的2倍。阳极面积增加1倍,产电量增大了30%;电压随活性炭装填体积的增大而增大;温度为40℃时,燃料电池的产电性能最好。     

Monitoring and assessing variation of sewage quality and microbial functional groups in a trunk sewer line

In this study, the variation of sewage quality was investigated and the active fraction of different microbial functional groups in biofilm was quantified in a 5.6-km trunk sewer line. The sewage quality including suspended solids, biochemical oxygen demand, total chemical oxygen demand (COD), total nitrogen, total Kjeldahl nitrogen, ammonia nitrogen, nitrite nitrogen, and nitrate nitrogen were measured and compared with the values in literatures. The results indicated that since the wastewater treatment plant was not operated at its full capacity, the concentrations of different compounds were lower compared with the values in literatures. The values of heterotrophic growth rate constant lay between 5.6 and 8.6 day^???1. Its average value was 7.7 day^???1. The values of heterotrophic lysis rate constant lay between 0.2 and 0.4 day^???1. The active heterotrophic biomass in biofilm varied from 240 to 800 mg COD m^???2 and average value was 497 mg COD m^???2. The biofilm mass varied from 880 to 1,080 mg m^???2. The percentage of heterotroph to biofilm mass fall within the range of 24.0–90.9% and average value was 52.9%. In the oxygen uptake rate batch tests, the biomass, growth rate constant, and lysis rate constant of autotroph could not be determined because the fraction of autotroph in biofilm was relatively few. It revealed that the degradation of organic matters, nitrification, and denitrification occurred in the trunk sewer line. But the results indicate that the condition seem favorable for nitrification.     

两阶段曝气生物滤池的硝化性能

曝气生物滤池(BAF)是近年来受到广泛关注的一种新型污水处理技术,具有占地面积少、投资费用低、处理效率高、出水水质好等优点。现已被应用于许多污水处理厂的二级处理、深度处理以及污水的回用。实验以陶粒为填料,自行设计了升流式两阶段BAFs(UBAFs)处理模拟生活污水,考察了反应器运行条件对COD与氨氮去除影响,并探讨了UBAFs反应器内氮流失及同步硝化反硝化情况。结果表明,UBAFs对生活污水处理具有良好的净化效果。在进水COD和氨氮浓度分别为200~363 mg/L和16.8~31.3 mg/L条件下,UBAFs处理出水水质均达到《城市污水再生利用城市杂用水水质》(GB/T 18920-2002)标准,能够满足回用要求。通过采用氮平衡分析方法和借助电子扫描电镜技术,初步认为UBAFs反应器脱氮方式是由于在UBAFs第一阶段局部厌氧环境中以传统方式进行硝化反硝化脱氮,第二阶段是在好氧条件下,异养好氧硝化菌的同步硝化反硝化脱氮。     

Analysis and comparison of inertinite-derived adsorbent with conventional adsorbents

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples. In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 degrees C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4 x 6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons. Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

Characteristics of springtime profiles and sources of ozone in the low troposphere over northern Taiwan

To quantify the possible sources of the high ambient ozone concentration in the low troposphere over Taiwan, ozone sounding data from a two-year intensive field measurement program conducted in April and early May of 2004 and 2005 in northern Taiwan has been examined. We found that the vertical ozone distributions and occurrence of enhanced ozone in the lower troposphere (below 6 km) mainly resulted from (1)Type NE: the long-range transport of ozone controlled by the prevailing northeasterly winds below 2 km, (2)Type LO: the local photochemical ozone production process, and (3)Type SW: the strong southwest/westerly winds aloft (2–6 km). In the boundary layer (BL), where Asian continental outflow prevails, the average profile for type NE is characterized by a peak ozone concentration of nearly 65 ppb at about 1500 m altitude. For type LO, high ozone concentration with an average ozone concentration greater than 80 ppb was also found in the BL in the case of stagnant atmospheric and sunny weather conditions dominated. For type SW, significant ozone enhancement with average ozone concentration of 70–85 ppb was found at around 4 km altitude. It is about 10 ppb greater than that of the types NE and LO at the same troposphere layer owing to the contribution of the biomass burning over Indochina. Due to Taiwan's unique geographic location, the complex interaction of these ozone features in the BL and aloft, especially features associated with northeasterly and south/southwesterly winds, have resulted in complex characteristics of ozone distributions in the lower troposphere over northern Taiwan.     

原铝生产流程温室气体排放主要影响因素的关联度分析

铝是国民经济建设和发展的关键基础材料,然而由其生产过程所产生的大量温室气体排放也逐渐成为政府关注的焦点。本研究计算了我国原铝生产不同年度的生命周期能耗和温室气体排放量,并分析了资源消耗和生产工序能耗等影响因素与温室气体排放的关联性。结果表明,在各年原铝生产的温室气体排放总量中,电力和阳极效应导致的排放所占比重分别为68.5%和7.9%,其他影响因素所占比重均低于6%;与温室气体排放关联度最高的3个影响因素依次是电耗、煤气燃烧和石灰石煅烧,其值分别为0.937、0.899和0.893;在目前铝电耗和阳极效应控制水平提升空间有限的情况下,降低煤气的消耗,提高石灰石的使用效率,是实现原铝生产温室气体减排的有效途径。     

A/O工艺N_2O的产生与释放的影响因素

采用A/O工艺,在连续运行条件下,以DO、SRT和硝化液回流比(R)为影响因素,对A/O生物脱氮工艺处理模拟城市生活污水过程中N2O的释放进行了研究。实验结果表明,SRT对A/O工艺N2O释放的影响最大,其次是DO,R的影响最小。N2O转化率随着SRT的升高而降低,当SRT从10 d升高到20 d时,总N2O平均转化率从0.319%下降到0.002%。总N2O转化率随着好氧池DO的升高先降低后有所升高,当DO分别为0.6 mg O2/L、1.2 mg O2/L、2.5 mg O2/L时,反应器的总N2O平均转化率分别为0.306%、0.007%和0.013%。R对N2O释放的影响差异不明显,总N2O平均转化率在300%时最低,为0.007%。N2O释放量最低的工艺运行条件组合是SRT为20 d、DO为1.2 mg O2/L、R为300%。