Can decentralized planning really achieve first-best in the presence of environmental spillovers?

It is generally accepted that decentralized policy choice in the presence of interjurisdictional spillovers is inefficient. Strikingly, Ogawa and Wildasin (2009) find that in a model with heterogenous jurisdictions, interjurisdictional capital flows, and interjurisdictional environmental damage spillovers, decentralized planning outcomes are equivalent to that under a centralized planner. We first show the critical importance of two key assumptions (no retirement of capital, fixed environmental damages per unit of capital) in obtaining this result. Second, we consider a more general model allowing for capital retirement and abatement activities and show that the outcome of a decentralized market generally differs from the solution of a centralized planner?s social welfare-maximizing problem.     

Glacier protection laws: Potential conflicts in managing glacial hazards and adapting to climate change

The environmental, socioeconomic and cultural significance of glaciers has motivated several countries to regulate activities on glaciers and glacierized surroundings. However, laws written to specifically protect mountain glaciers have only recently been considered within national political agendas. Glacier Protection Laws (GPLs) originate in countries where mining has damaged glaciers and have been adopted with the aim of protecting the cryosphere from harmful activities. Here, we analyze GPLs in Argentina (approved) and Chile (under discussion) to identify potential environmental conflicts arising from law restrictions and omissions. We conclude that GPLs overlook the dynamics of glaciers and could prevent or delay actions needed to mitigate glacial hazards (e.g. artificial drainage of glacial lakes) thus placing populations at risk. Furthermore, GPL restrictions could hinder strategies (e.g. use of glacial lakes as reservoirs) to mitigate adverse impacts of climate change. Arguably, more flexible GPLs are needed to protect us from the changing cryosphere.     

An analysis of spatial and temporal properties of daily sulfate, nitrate and chloride concentrations at UK urban and rural sites

Daily measurements of sulfate, nitrate and chloride in PM(10) have been made at three geographically separated UK sites over a three year period. Chloride shows a clear seasonal pattern with highest concentrations in winter, whilst sulfate and nitrate both show highest concentrations in the spring, apparently related to weather patterns. Spatial variability of both sulfate and nitrate is low in comparison to temporal variations, with high correlations of both species between all three sites, London (North Kensington), Harwell and Belfast, despite a geographic separation of 510 km. Both SO/SO(2) and NO/NO(x) ratios are considerably higher in summer than winter, reflecting a greater oxidising capacity of the atmosphere. SO(4)(2-)/NO(3)(-) ratios are higher in summer than winter, suggesting that aqueous phase oxidation of SO(2), expected to be most important in the winter months is not appreciably influencing production of sulfate aerosol, although greater dissociation of ammonium nitrate in summer may also play a role. Regression of concentrations at London, North Kensington with those from the proximate rural site of Harwell is interpreted as showing a similar effect of regional transport at the two sites and a small influence of local formation in the urban atmosphere or primary emissions, averaging 0.46 microg m(-3) of nitrate and 0.22 microg m(-3) of sulfate.     

Determination of relative assay response factors for toxic chlorinated and brominated dioxins/furans using an enzyme immunoassay (EIA) and a chemically-activated luciferase gene expression cell bioassay (CALUX)

Determination of toxic activity requires knowledge of both the concentration and toxicity to evaluate the risk for adverse human health and environmental effects. A chemically-activated luciferase gene expression cell bioassay system (CALUX) and an antibody-based method enzyme immunoassay (EIA) were used to detect the dioxin-like response of several polybrominated, polychlorinated, and polybrominated/chlorinated dibenzo-p-dioxins/furans (PBDDs/Fs, PCDDs/Fs, and PBCDDs/Fs, respectively). It has been suggested that the biological activity of the brominated and mixed bromo/chloro compounds is similar to their chlorinated analogues (measured by binding to the Ah receptor). PBDD/F, PCDD/F, and PBCDD/F laboratory standards exhibited biological activity ranging over three orders of magnitude. The highest relative potency (REP) values from CALUX analysis, when compared to 2,3,7,8-TCDD, were 2,3,7,8-TBDD at 0.99 (± 0.07), 1,2,3,7,8-PeCDD at 0.69, and 2-Br-3,7,8-TriCDD at 0.72 (± 0.02). Cross-reactivities were calculated using EIA for several PBDDs/Fs and PBCDDs. The highest percent cross-reactivity was found for 2,3,7,8-TBDD at 138 (± 34%), and 2,3,7-TriBDD at 84 (± 36%).     

A European aerosol phenomenology – 3: Physical and chemical characteristics of particulate matter from 60 rural,urban, and kerbside sites across Europe

This paper synthesizes data on aerosol (particulate matter, PM) physical and chemical characteristics, which were obtained over the past decade in aerosol research and monitoring activities at more than 60 natural background, rural, near-city, urban, and kerbside sites across Europe. The data include simultaneously measured PM₁₀ and/or PM_2.5 mass on the one hand, and aerosol particle number concentrations or PM chemistry on the other hand. The aerosol data presented in our previous works (Van Dingenen et al., 2004, Putaud et al., 2004) were updated and merged to those collected in the framework of the EU supported European Cooperation in the field of Scientific and Technical action COST633 (Particulate matter: Properties related to health effects). A number of conclusions from our previous studies were confirmed. There is no single ratio between PM_2.5 and PM₁₀ mass concentrations valid for all sites, although fairly constant ratios ranging from 0.5 to 0.9 are observed at most individual sites. There is no general correlation between PM mass and particle number concentrations, although particle number concentrations increase with PM_2.5 levels at most sites. The main constituents of both PM₁₀ and PM_2.5 are generally organic matter, sulfate and nitrate. Mineral dust can also be a major constituent of PM₁₀ at kerbside sites and in Southern Europe. There is a clear decreasing gradient in SO₄^2? and NO₃^? contribution to PM₁₀ when moving from rural to urban to kerbside sites. In contrast, the total carbon/PM₁₀ ratio increases from rural to kerbside sites. Some new conclusions were also drawn from this work: the ratio between ultrafine particle and total particle number concentration decreases with PM_2.5 concentration at all sites but one, and significant gradients in PM chemistry are observed when moving from Northwestern, to Southern to Central Europe. Compiling an even larger number of data sets would have further increased the significance of our conclusions, but collecting all the aerosol data sets obtained also through research projects remains a tedious task.     

Identification of brake wear particles and derivation of a quantitative tracer for brake dust at a major road

Traffic-generated air pollutant emissions can be classified into exhaust and non-exhaust emissions. Increased attention is focussing on non-exhaust emissions as exhaust emissions are progressively limited by regulations. To characterise metal-rich emission from abrasion processes, size-segregated analysis of atmospheric aerosol particles sampled with micro-orifice uniform deposit impactors (MOUDI) in March 2007 in London was performed. The samples were collected at a roadside and a background site and were analysed for Al, Ba, Cu, Fe, Sb, Ti, V, Zn, Ca²⁺, K⁺, Mg²⁺, Na⁺, and NH₄⁺. Most components showed a clear roadside increment, which was evident as a higher mass concentration and a change in the size distribution. In particular, Fe, Cu, Ba, and Sb correlated highly, indicative of a common traffic-related source. Using complementary information on the fleet composition, vehicle number and average speed, the brake wear emission was calculated using the EMEP/CORINAIR emission database. The total PM₁₀ and barium emission of the traffic was determined by ratio to NO_x whose source strength was estimated from published emission factors. Barium was found to comprise 1.1% of brake wear (PM₁₀) particles from the traffic fleet as a whole, allowing its use as a quantitative tracer of brake wear emissions at other traffic-influenced sites.     

Biotic, temporal and spatial variability of tritium concentrations in transpirate samples collected in the vicinity of a near-surface low-level nuclear waste disposal site and nearby research reactor

The results of a 21 month sampling program measuring tritium in tree transpirate with respect to local sources are reported. The aim was to assess the potential of tree transpirate to indicate the presence of sub-surface seepage plumes.Transpirate gathered from trees near low-level nuclear waste disposal trenches contained activity concentrations of ³H that were significantly higher (up to ∼700 Bq L⁻¹) than local background levels (0-10 Bq L⁻¹). The effects of the waste source declined rapidly with distance to be at background levels within 10s of metres. A research reactor 1.6 km south of the site contributed significant (p < 0.01) local fallout ³H but its influence did not reach as far as the disposal trenches.The elevated ³H levels in transpirate were, however, substantially lower than groundwater concentrations measured across the site (ranging from 0 to 91% with a median of 2%). Temporal patterns of tree transpirate ³H, together with local meteorological observations, indicate that soil water within the active root zones comprised a mixture of seepage and rainfall infiltration. The degree of mixing was variable given that the soil water activity concentrations were heterogeneous at a scale equivalent to the effective rooting volume of the trees. In addition, water taken up by roots was not well mixed within the trees. Based on correlation modelling, net rainfall less evaporation (a surrogate for infiltration) over a period of from 2 to 3 weeks prior to sampling seems to be the optimum predictor of transpirate ³H variability for any sampled tree at this site.The results demonstrate successful use of ³H in transpirate from trees to indicate the presence and general extent of sub-surface contamination at a low-level nuclear waste site.     

Improving the farmland biodiversity value of riparian buffer strips: conflicts and compromises

The intensity of management of lowland grassland fields in the United Kingdom, coupled with the fact that such grasslands dominate much of the lowland landscape, means that there are now few opportunities for many plants, invertebrates, birds, or mammals to survive. The Scottish Agricultural College (SAC) has investigated whether fencing off the margins of such fields next to watercourses to control diffuse pollution has any positive impacts on biodiversity, based on assessments of vegetation composition and condition and structure of assemblages of invertebrates of importance as foodstuffs to farmland birds. Fencing watercourses increased the abundance of key groups of invertebrates. However, the invertebrate species diversity was not increased unless the margins were ≥ 5.4 m in width. Margins established in the study area to prevent access by livestock to watercourses or to enhance biodiversity are generally ≤ 2.6 m wide and are therefore unlikely to provide conditions for additional invertebrate species to use. The dense, tall swards within such margins are also unlikely to provide foraging opportunities for farmland birds. Management (such as low-intensity grazing by livestock in the margins) is essential to provide the conditions required for these groups, but this could conflict with the diffuse pollution mitigation aims. A compromise is proposed whereby limited autumn/winter grazing by livestock could be used to open the vegetation structure in the margins. Grazing by livestock at that time may be acceptable since it is not occurring in the period of main diffuse pollution concern (i.e., the fecal contamination of watercourses and bathing waters in the spring and summer). It is also essential that a landscape-scale approach is taken, driven by knowledge of the full needs of the species concerned, when deciding where best to target agri-environmental actions aimed at farmland bird conservation.     

Development and Evaluation of an Impactor for a PM2.5 Speciation Sampler

ABSTRACT

A conventional impactor for a particle speciation sampler was developed and validated through laboratory and field tests. The speciation sampler consists of the following components: a PM_2.5 conventional impactor that removes particles larger than 2.5 μm, an all-glass, coated honeycomb diffusion denuder, and a 47-mm filter pack. The speciation sampler can operate at two different sampling rates: 10 and 16.7 L/min. An experimental characterization of the impactor’s performance was conducted. The impactor’s collection efficiency was examined as a function of critical design parameters such as Reynolds number, the distance from the nozzle exit to the impac-tion plate, and the impaction substrate coating method. The bounce of particles larger than the cut point was successfully minimized by using a greased surface as the im-paction substrate. Additionally, a series of field intercomparison experiments were conducted at both 10 and 16.7 L/min airflow. PM_2.5 mass and SO₄ ^2- concentrations were measured and compared with the Federal Reference Method (FRM) and found to be in good agreement. Results of the laboratory chamber tests also indicated that the impactor’s performance was in good agreement with the FRM.