Dietary PBDE intake: a market-basket study in Belgium

A food market-basket, representative for the general Belgian population, containing various meat, fish and dairy food products, was assembled and analysed for its polybrominated diphenyl ether (PBDE) content. Additionally, fast food samples were also investigated. Based on the measured PBDE levels, an average daily dietary intake estimate of PBDEs was calculated. Of all foods analysed, fish had the highest average sum of PBDE levels (BDEs 28, 47, 99, 100, 153, 154, and 183; 460 pg/g ww), followed by dairy products and eggs (260 pg/g ww), fast food (86 pg/g ww) and meat products (70 pg/g ww). One fresh salmon filet had the highest total concentration of PBDEs (2360 pg/g ww), whereas levels in steak and chicken breast were the lowest of all foods analysed. BDE 209 was never found above LOQ in any food. PBDE intake calculations were based on the average daily food consumption in Belgium and were estimated between 23 and 48 ng/day of total PBDEs (lower and upper bound). This value is in accordance with what was previously reported for diets from geographical distinct areas, such as Canada, Finland, Spain, Sweden and the UK. Although it is only a minor constituent of the Belgian diet, fish is the major contributor to the total daily PBDE-intake (around 40%) due to the high PBDE levels in this type of food. Although low contaminated, meat products account for around 30% of the total dietary intake of PBDEs. Dairy products and eggs contribute to a lesser degree (less than 30%).     

Postnatal nutrition influences male attractiveness and promotes plasticity in male mating preferences

Poor early-life nutrition could reduce adult reproductive success by negatively affecting traits linked to sexual attractiveness such as song complexity. If so, this might favor strategic mate choice, allowing males with less complex songs to tailor their mating tactics to maximize the reproductive benefits. However, this possibility has been ignored in theoretical and empirical studies. By manipulating the micronutrient content of the diet (e.g., low or high) during the postnatal period of male zebra finches, we show for the first time (1) that males reared on a poor (low) micronutrient diet had less complex songs as adults; (2) that these males, in contrast to the high micronutrient diet group, were more selective in their mating strategies, discriminating against those females most likely to reduce their clutch size when paired with males having less complex songs; and (3) that by following different mating strategies, males reared on the contrasting diets obtained similar reproductive benefits. These results suggest that early-life dietary conditions can induce multiple and long-lasting effects on male and female reproductive traits. Moreover, the results seem to reflect a previously unreported case of adaptive plasticity in mate choice in response to a nutritionally mediated reduction in sexual attractiveness.     

The use of sensory perception indicators for improving the characterization and modelling of total petroleum hydrocarbon (TPH) grade in soils

This paper proposes a multistep approach for creating a 3D stochastic model of total petroleum hydrocarbon (TPH) grade in potentially polluted soils of a deactivated oil storage site by using chemical analysis results as primary or hard data and classes of sensory perception variables as secondary or soft data. First, the statistical relationship between the sensory perception variables (e.g. colour, odour and oil–water reaction) and TPH grade is analysed, after which the sensory perception variable exhibiting the highest correlation is selected (oil–water reaction in this case study). The probabilities of cells belonging to classes of oil–water reaction are then estimated for the entire soil volume using indicator kriging. Next, local histograms of TPH grade for each grid cell are computed, combining the probabilities of belonging to a specific sensory perception indicator class and conditional to the simulated values of TPH grade. Finally, simulated images of TPH grade are generated by using the P-field simulation algorithm, utilising the local histograms of TPH grade for each grid cell. The set of simulated TPH values allows several calculations to be performed, such as average values, local uncertainties and the probability of the TPH grade of the soil exceeding a specific threshold value.     

Implication of nitric oxide in the heat-stress-induced cell death of the symbiotic alga <Emphasis Type="Italic">Symbiodinium microadriaticum</Emphasis>

One of the major consequences of global warming is a rise in sea surface temperature which may affect the survival of marine organisms including phytoplankton. Here, we provide experimental evidence for heat-induced cell death in a symbiotic microalga. Shifting Symbiodinium microadriaticum from 27 to 32°C resulted in an increase in mortality, an increase in caspase 3-like activity, and an increase in nitric oxide (NO) production. The caspase-like activity was strongly correlated with the production of NO in thermally challenged microalgae. For this experiment, the application of Ac-DEVD-CHO, a mammalian caspase 3-specific inhibitor, partly prevented (by 65%) the increase in caspase-like activity. To verify the relationship between NO and the caspase-like activity, S. microadriaticum were subsequently incubated with 1.0 mM of the following chemical NO donors: sodium nitroprusside (SNP), S-nitrosoglutathione (GSNO), S-nitroso-N-acetylpenicillamine (SNAP) and 3,3bis(Aminoethyl)-1-hydroxy-2-oxo-1-triazene (NOC-18). The supplementation of both SNP and NOC-18 caused a significant increase in caspase-like activity compared to the control treatment. Pre-treatment of the microalgae with the inhibitor Ac-DEVD-CHO before the supplementation of the different NO donors completely prevented the increase in caspase-like activity. These results suggest that NO could play a role in the induction of cell death in heat-stressed S. microadriaticum by mediating an increase in caspase-like activity.     

A methodology to identify representative configurations of sensors for monitoring soil moisture

Soil moisture is the key link among hydroecological compartments, responding dynamically to sequences of atmospheric processes and management conditions and modulating physical, chemical, and biological processes in the soil. Currently, there are a variety of monitoring techniques to measure, directly or indirectly, the soil moisture. However, some practical issues remain open like the definition a priori of the number, location and depth of the monitoring points, and the impact of failing or poor performance soil moisture sensors. Here, we present a set of techniques, namely Δθ time series, wavelet filtering, and time stability, to identify representative points and monitoring depths through an analysis of hourly soil moisture time series for different configuration of the monitoring network. We used real data from a monitoring network consisting of seven monitoring points, each one with four EC-5 probes (Decagon Devices Inc., Pullman, WA) at 20, 40, 60, and 100?cm. The use of simple time series of Δθ allowed us to assess the spatiotemporal influence of the monitoring points, while the wavelet periodograms allowed us to get insight about the response of the monitoring points at different time scales. Both methods are easy to implement or adapt to specific conditions, being coherent to the results derived from time stability analysis. For our case study, we concluded that we could reallocate 16 sensors (out of 28) without a significant loss of information. However, the final decision strongly relies on a deep knowledge of the site features and the objectives of the monitoring network.     

Environmental and social determinants of anuran lekking behavior: intraspecific variation in populations at thermal extremes

Environmental and social factors are critical to determine the timing and duration of lekking behavior since they provide species with signs to maximize benefits over costs in sexual displays. However, these factors have rarely been studied under different environmental conditions, and thus, it remains unclear whether exogenous factors affecting group displays show a general species-specific pattern or whether they are population-specific. Using audio-trapping techniques, we compared factors influencing the daily occurrence and duration of lekking behavior in two populations of Hyla molleri and two populations of Hyla meridionalis located at the thermal extremes (coldest vs. hottest) of their Iberian distribution range. From 12,240 hourly recordings over one season, multimodel inference revealed that the major determinants of chorus occurrence were similar between populations and species (i.e., chorus size the previous day, daytime air temperature, relative humidity, and barometric pressure), and accounted for 51–79 % of its deviance. In contrast, the major determinants of chorus duration differed between populations and species (i.e., chorus size, number of day, and air temperature and relative humidity at the onset of the chorus), and accounted for 38–69 % of its variance. Our findings suggest that the decision making related to lek attendance is environment-dependent, takes place at time between lekking events, and is associated with exogenous factors that may be both stable across species ranges and population-specific when populations are under different climatic conditions. This intraspecific variation might be underlain by plasticity mechanisms providing tree frogs with means to cope with changing environments. Moreover, social facilitation related to male-male acoustic competition seems to play a relevant role on the daily time invested by males in lek attendance.     

Construction safety: An analysis of systems failure: The case of the multifunctional Bos & Lommerplein estate,Amsterdam

Bos & Lommer is a district in the west of Amsterdam. The new centre, consisting of the district office, 96 apartments, a few dozen businesses and shops, a two-storey parking lot with capacity for more than 500 cars, and a market place, was completed in 2004. Less than 2 years later, in July 2006, this whole multifunctional complex had to be urgently cleared, because its safety could not be guaranteed.The investigations revealed that the planning and realisation of the Bos & Lommer complex were anything but exceptional. What happened there could have happened anywhere in the Netherlands and possibly elsewhere.This paper analyses the decision-making process in the planning and construction of the Bos & Lommerplein estate on the basis of accident causation theories. It will ascertain which safety science methodology is best equipped to describe and analyse the events in this multifunctional estate. The analysis forms the basis for a reflection on a set of concrete guidelines for designing and constructing complex projects. Construction safety would be enhanced if the scope for improvement in decision-making on complex building projects were properly utilised.     

Effect of feeding strategy and COD/sulfate ratio on the removal of sulfate in an AnSBBR with recirculation of the liquid phase

The objective of this work was to analyze the effect of the interaction between feeding strategy and COD/sulfate ratio on the removal efficiency of sulfate and organic matter from a synthetic wastewater. An anaerobic sequencing batch reactor with recirculation of the liquid phase and containing immobilized biomass on polyurethane foam (AnSBBR) was used. The AnSBBR with a total volume of 3.7 L, treated 2.0 L synthetic wastewater in 8-h cycles at 30 ± 1 °C and was inoculated with anaerobic biomass from a UASB. Two feeding strategies were assessed: (a) batch and (b) batch followed by fed-batch. In strategy (a) the reactor was fed in 10 min with 2 L wastewater containing sulfate and carbon sources. In strategy (b) 1.2 L wastewater (containing only the sulfate source) was fed during the first 10 min of the cycle and the remaining 0.8 L (containing only the carbon source) in 240 min. The COD/sulfate ratios assessed were 1 and 3. Based on these values and on the concentrations of organic matter (0.5–11.25 gCOD/L) and sulfate (0.5 and 2.5 gSO₄^2?/L), the sulfate and organic matter loading rates applied equaled 1.5 and 4.5 gSO₄^2?/L d for sulfate and 1.5, 4.5 and 13.5 gCOD/L d for organic matter. After stabilization of the system time profiles were run of monitored parameters (COD, sulfate, sulfide and sulfite). In general, the reactor showed to be robust for use in the anaerobic treatment of wastewaters containing sulfate. Gradual feeding (strategy b) of the carbon source favored sulfate reduction, resulting in sulfate removal efficiencies of 84–98% and organic matter removal efficiencies of 48–95%. The best results were observed under COD/sulfate ratio equal to 1 (loading rates of 1.5 and 4.5 gSO₄^2?/L d for sulfate, and 1.5 and 4.5 gCOD/L d for organic matter). When COD/sulfate ratio was 3 (loading rates of 1.5 and 4.5 gSO₄^2?/L d for sulfate, and 4.5 and 13.5 gCOD/L d for organic matter) the effect of feed mode became less significant. These results show that the strategy batch followed by fed-batch is more advantageous for COD/sulfate ratios near the stoichiometric value (0.67) and higher organic matter and sulfate concentrations.     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.