Determination of chemical characterizations of activated carbons from various raw materials

The objectives of this research were to identify the surface chemical features of activated carbons made of peat, bituminous coal and coconut shell, as well as examine the specific relationship of these properties by using statistical analyses. The results showed that the peat carbons contained much more amounts of Ca, S, P and Mg; however, the bituminous carbons possessed higher contents of Si, Al and Fe. In addition, the content ratios of Al to Si exhibited the Al enrichment phenomenon occurred after the heat treatment. A nonlinear correlation between the pH value and the difference in the amounts of basic and acidic groups was developed. Unfortunately, there were no specific mass ratios found among the acidic functional groups. The results of correspondence analysis (CA) gave a promising confirmation about the EDXRF analysis; moreover, the results of factor analysis (FA) fairly agreed with the findings suggested by CA. Both could explain the specific chemical features of activated carbons made from different materials, especially the CA could differentiate each other in detail.     

Forward

Abstract

Three collectives of substances - plastics, plant nutrients, biotoxins - are candidates for monitoring programmes that could keep track of the quality of ocean waters for vital life processes. All three are not subject to systematic surveillance at present. They are each characterized by long residence times in the marine environment, by increasing influx, and by growing evidence of their deleterious impacts on living systems.     

Fluxes and Transport of Organic Carbon and Trace Metals in the Tropical Tsengwen Estuary,Southwestern Taiwan

Distributions of organic carbon and trace metals were investigated in the tropical Tsengwen river end-member and in the estuary to better understand thoroughly the riverine fluxes and estuarine transports of constituents into the sea. Experimental results indicated that riverine fluxes of organic carbon and trace metals possessed a highly temporal variability, attributed primarily to temporal variation in river water discharge and suspended load. More than 70% of annual fluxes of dissolved constituents and >90% of particulate constituents arose from river floods caused by summer typhoons. the flushing time of fresh water in the estuary varied from a half month in the dry season to a half day in the flood period. Dissolved organic carbon (DOC) and nutrienttype metals (Cd, Cu, Zn) were conservatively transported through the estuary. Dissolved particle-reactive metals (Mn, Pb), however, were apparently transported non-conservatively through the estuary. Particulate organic carbon (POC) and trace metals (PTM) were transported non-conservatively by following the transport mode of total suspended matter (TSM) in the estuary. DOC slightly dominates the transport of organic carbon while particle-reactive PTM predominates the transport of trace metals through the estuary. Total organic carbon (TOC) in estuarine sediment was progressively enriched with ¹³C downstream, as derived by mixing the overlying TSM between terrestrial and marine end-members. Distributions of trace metals in sediment were subsequently controlled by sedimentary TOC and particle size. Based on results presented here, we believe that enrichments of trace metals in the estuary are attributed primarily to the natural processes of transport and sedimentation of fluvial TSM     

Removal of hazardous heavy metals from aqueous environment by low-cost adsorption materials

The rapid growth of the human population and industrialization in the world has indirectly increased environmental problems such as water, air and land pollution. Amongst all, heavy metals can be considered as the most problematic pollutants. Numerous efforts have been attempted to minimize the impact of heavy metals. This chapter discusses the recent developments and technical applicability of different treatment methods for heavy metal removal. The adsorption process using various low-cost materials as the potential alternative for heavy metal removal is being highlighted and summarized.     

Site-specific bioaccumulation of polychlorinated dibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins and polychlorinated dibenzofurans (PCDD/PCDFs) in mothers and their infants living in vicinity of Bien Hoa airbase,Southern Vietnam

Bien Hoa airbase is located in Dong Nai Province (Southern Vietnam). Several sites within the airbase are highly contaminated by Agent Orange/Dioxin, and thus, they are also commonly named as an Agent Orange/Dioxin hotpot. In the present study, 36 maternal milk samples were collected from primiparas who have lived at least 5 years in four wards, Buu Long, Quang Vinh, Trung Dung and Tan Phong, which are closed to Bien Hoa airbase in order to investigate the level and distribution of Agent Orange/Dioxin exposure in different local communities. The mean concentrations of PCDD/PCDFs in four investigated wards range from 6.4 to 13.6 pgTEQ/g lipid. The highest mean TEQ of PCDD/PCDFs was observed in Buu Long ward (13.6 pgTEQ/g lipid), followed by Tan Phong ward (12.3 pgTEQ/g lipid), and the lowest value was observed in Trung Dung ward (6.4 pgTEQ/g lipid). The mean concentration of 2,3,7,8-TCDD in Buu Long (7.6 pg/g lipid) was approximately 2–6 times higher than those in Tan Phong (3.9 pg/g lipid), Quang Vinh (2.3 pg/g lipid), or Trung Dung (1.2 pg/g lipid). These results imply site-specific exposure to PCDD/PCDFs in different local communities living around Bien Hoa airbase. The mean values of daily intake of dioxin estimated for the breast fed infants living in Buu Long, Quang Vinh, Trung Dung and Tan Phong were about 80, 37.5, 31.7 and 58 pg TEQ/kg bw/day, respectively.     

Development of nutrient cycle through agricultural activities of a rural area in the North of Vietnam

Material flow analysis (MFA) has been applied to assess the environmental impact of human activities on nutrient flows at the commune scale. This paper reports the assessment of human excreta and animal manure as a nutrient source for paddy fields and fishponds in Hoang Tay commune, Ha Nam province, Vietnam. The quality of MFA model was confirmed through modified uncertainty analysis, then was used to originally quantify and visualize the interlinks of livestock with the environmental sanitation and agricultural system in terms of nutrients. Currently, half of the pig manure was collected to the biogas, and the remainders were freely discharged to the commune’s drainage system (25%) or directly reused in the paddy fields (25%). While wastewater in the drainage system was the biggest source of nitrogen (contributed 46%), paddy field was the biggest source of phosphorous (contributed 55%) discharged to the Nhue River, totaling 57 ± 9 ton N and 29 ± 6 ton P, annually. Consequently, mitigation measures for nutrient resource management were proposed, and reducing half of chemical fertilizers applied and reusing all excreta and manure in the paddy fields were the most effective option.     

Comparison of the physical and chemical characteristics of fine road dust at different urban sites

The size distribution and chemical components of a fine fraction (<2.5 μm) of road dust collected at urban sites in Korea (Gwangju) and Mongolia (Ulaanbaatar) where distinct urban characteristics exist were measured. A clear bimodal size distribution was observed for the resuspended fine road dust at the urban sites in Korea. The first mode peaked at 100–110 nm, and the second peak was observed at 435–570 nm. Ultrafine mode (~30 nm) was found for the fine road dust at the Mongolia site, which was significantly affected by residential coal/biomass burning. The contribution of the water-soluble ions to the fine road dust was higher at the sites in Mongolia (15.8–16.8%) than at those in Korea (1.2–4.8%). Sulfate and chloride were the most dominant ionic species for the fine road dust in Mongolia. As (arsenic) was also much higher for the Mongolian road dust than the others. The sulfate, chloride, and As mainly come from coal burning activity, suggesting that coal and biomass combustion in Mongolia during the heating season should affect the size and chemical components of the fine road dust. Cu (copper) and Zn (zinc), carbonaceous particles (organic carbon [OC] and elemental carbon [EC]) increased at sites in Korea, suggesting that the fine road dust at these sites was significantly affected by the high volume of traffic (engine emission and brake/tire wear). Our results suggest that chemical profiles for road dust specific to certain sites should be applied to more accurately apportion road dust source contributing to the ambient particulate matter.

Implications: Size and chemical characteristics of fine road dust at sites having distinct urban characteristics were examined. Residential coal and biomass burning and traffic affected physiochemical properties of the fine road dust. Different road dust profiles at different sites should be needed to determine the ambient PM2.5 sources more accurately.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

A new joint publication

Special FeatureWaste Management Research in Korea

A new joint publication     

Relationship of urinary arsenic metabolites to intake estimates in residents of the Red River Delta, Vietnam

This study investigated the status of arsenic (As) exposure from groundwater and rice, and its methylation capacity in residents from the Red River Delta, Vietnam. Arsenic levels in groundwater ranged from <1.8 to 486 μg/L. Remarkably, 86% of groundwater samples exceeded WHO drinking water guideline of 10 μg/L. Also, estimated inorganic As intake from groundwater and rice were over Provisional Tolerable Weekly Intake (15 μg/week/kg body wt.) by FAO/WHO for 92% of the residents examined. Inorganic As and its metabolite (monomethylarsonic acid and dimethylarsinic acid) concentrations in human urine were positively correlated with estimated inorganic As intake. These results suggest that residents in these areas are exposed to As through consumption of groundwater and rice, and potential health risk of As is of great concern for these people. Urinary concentration ratios of dimethylarsinic acid to monomethylarsonic acid in children were higher than those in adults, especially among men, indicating greater As methylation capacity in children.