Whole-mount in situ TUNEL method revealed ectopic pattern of apoptosis in cadmium treated naupliar larvae of barnacle (Balanus amphitrite Darwin)

The effect of cadmium on stage II naupliar larvae of barnacle (Balanus amphitrite Darwin) was investigated. Barnacle larvae were exposed to 0-15 microM CdCl(2) for 24 h. Apoptotic cells were stained by the terminal deoxyribonucleotidyl transferase mediated dUTP nick end labelling (TUNEL) method. Incidence of apoptosis, as measured by numbers of animals with ectopic pattern of apoptosis as well as numbers of apoptotic cells per animal, was assessed using confocal microscopy. An increase in incidence of apoptosis was observed in the experimental animals with an increase in cadmium concentration. Mortality increased, and motility decreased, when barnacle larvae were exposed to an increasing concentration of cadmium. The relationship between the occurrence of apoptosis and swimming behaviour was investigated in larvae exposed to 10 microM CdCl(2). Significant increases in apoptosis were detected in the non-motile and dead nauplii. This study suggested that whole-mount in situ TUNEL method may be used to study increased occurrence of apoptotic cells in crustacean larvae.     

Microsomal monooxygenase activity in Tilapia (Oreochromis mossambicus) exposed to a bleached kraft mill effluent using different exposure systems.

Bleached kraft pulp and paper mill effluents (BKMEs) are known to have adverse effects on aquatic organisms. One of the effects of BKMEs is its ability to induce cytochrome P4501A activity in exposed fish. 7-Ethoxyresorufin O-deethylase (EROD) activity is the most common biomarker used to measure the mixed-function monooxygenase activity. In this study, Tilapia were exposed to BKMEs using different exposure systems and their hepatic EROD activity, as well as liver/somatic index (LSI), were determined. In the Phase I study, Tilapia treated with betaNF and a whole (100%) BKME using a static, non-renewal system exhibited statistically significant EROD induction, but LSI values were not altered. In the Phase II study, fish were either caged in the mill's fishpond with the whole effluent passing through or cultured in tanks receiving 100% of the BKME continuously using a flow-through system in the laboratory. Their EROD activities were then compared with the non-exposed fish (control). The EROD activities in both groups of fish were elevated significantly with the greatest induction being observed in the field-exposed group. The LSI values in all of the field-exposed fish were significantly greater than the control Tilapia. The EROD assay was sensitive in detecting biological changes in fish exposed to the BKME. Further studies are warranted to better understand the impacts of BKMEs on aquatic organisms in Taiwan.     

Development of nutrient cycle through agricultural activities of a rural area in the North of Vietnam

Material flow analysis (MFA) has been applied to assess the environmental impact of human activities on nutrient flows at the commune scale. This paper reports the assessment of human excreta and animal manure as a nutrient source for paddy fields and fishponds in Hoang Tay commune, Ha Nam province, Vietnam. The quality of MFA model was confirmed through modified uncertainty analysis, then was used to originally quantify and visualize the interlinks of livestock with the environmental sanitation and agricultural system in terms of nutrients. Currently, half of the pig manure was collected to the biogas, and the remainders were freely discharged to the commune’s drainage system (25%) or directly reused in the paddy fields (25%). While wastewater in the drainage system was the biggest source of nitrogen (contributed 46%), paddy field was the biggest source of phosphorous (contributed 55%) discharged to the Nhue River, totaling 57 ± 9 ton N and 29 ± 6 ton P, annually. Consequently, mitigation measures for nutrient resource management were proposed, and reducing half of chemical fertilizers applied and reusing all excreta and manure in the paddy fields were the most effective option.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

Reliability of solid phase microextraction in estimating bioavailability of pyrene in soil

Solid phase microextraction (SPME) coupled with gas chromatography was employed to estimate bioavailability of pyrene in soils with different properties of textures, organic matter contents (SOM) and aging periods. Experimental results indicated that biodegradation rates increased from 0.10 (sandy loam) to 0.15 (silty loam) microg g-1 hr1. By contrast, biodegradation rate decreased from 0.10(1.3% SOM) to 0.04 (7.6% SOM) microg g-1hr1. The amounts of pyrene biodegraded decreased 27% when SOM was modified from 1.3 to 7.6%, indicating that distributions of pyrene in soils at biodegradation end points were affected by the SOM. Sequestration as measured by sonication extraction had evidently occurred in aged soil samples. SPME measurements slightly overestimated the amount of pyrene degraded by indigenous and seeded microorganisms, in soils with the different properties (correlation coefficient, R2= 0.74). The present study demonstrates that the SPME method can not replace biodegradation tests commonly used for predicting bioremediation efficacy.     

LINE SOURCE DISPERSION WITH APPLICATION TO MIXING IN RIVER CHANNELS1

ABSTRACT: Two-dimensional solutions for transient dispersion of nonconservative dispersants in uniform flow resulting from a transverse line source of variable concentration are obtained using multiple integral transformations. In general, the solutions are in integral forms, which can be efficiently evaluated using Filon's quadratures. Examples are presented for cases of practical interest. Applicability of the solution for modeling dispersion in natural river channel where the distribution of flows across the channel are nonuniform is discussed.     

Assessment of pilot direct contact membrane distillation regeneration of lithium chloride solution in liquid desiccant air-conditioning systems using computer simulation

Environmental Science and Pollution Research - Membrane distillation (MD) has been increasingly explored for treatment of various hyper saline waters, including lithium chloride (LiCl) solutions...     

Characterization of dissolved organic carbon and Humic substances in the well water of the Blackfoot disease area in Taiwan

Since the early 1960s, many investigators have reported that blackfoot disease, a peripheral vascular disease, observed in southwestern Taiwan is due to drinking the higher arsenic concentration in well water. However, recent studies indicated that the relationship with blackfoot disease is not only with arsenic but also humic substances. This paper presents some results concerning the characterization (such as fluorescence, elemental composition, molecular weight and carbon distribution) of humic substances isolated from the Fuhsing well water of the blackfoot disease area. For comparison, the dissolved organic carbon (DOC) and humic substances in the normal well water from Chiuying and the Nanwan coastal water were also analyzed. In general, in the well water of the blackfoot disease area, extremely high concentrations of DOC (18.5mg/L) and fulvic acid (7.54mg/L) with high fluorescence intensity (59.1, equivalent to 0.0282uM quinine sulfate solution) and high percentages (over 50%) of low molecular weights of less than 1,000 were obtained compared with those of normal waters. C‐13 Nuclear magnetic resonance spectroscopy showed a high content (37.2%) of aromatic carbon. These higher concentrations of DOC and fulvic acid with the higher content of aromatic carbon in well water might be one of the key factors causing the blackfoot disease in Taiwan.     

Determination of chemical characterizations of activated carbons from various raw materials

The objectives of this research were to identify the surface chemical features of activated carbons made of peat, bituminous coal and coconut shell, as well as examine the specific relationship of these properties by using statistical analyses. The results showed that the peat carbons contained much more amounts of Ca, S, P and Mg; however, the bituminous carbons possessed higher contents of Si, Al and Fe. In addition, the content ratios of Al to Si exhibited the Al enrichment phenomenon occurred after the heat treatment. A nonlinear correlation between the pH value and the difference in the amounts of basic and acidic groups was developed. Unfortunately, there were no specific mass ratios found among the acidic functional groups. The results of correspondence analysis (CA) gave a promising confirmation about the EDXRF analysis; moreover, the results of factor analysis (FA) fairly agreed with the findings suggested by CA. Both could explain the specific chemical features of activated carbons made from different materials, especially the CA could differentiate each other in detail.