Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.     

A fractal derivative model to quantify bed-load transport along a heterogeneous sand bed

Environmental Fluid Mechanics - Bed-load transport is a complex process exhibiting anomalous dynamics, which cannot be efficiently described using the traditional advection–diffusion...     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

Effects of rainfall on surface environment and morphological characteristics in the Loess Plateau

Environmental Science and Pollution Research - Slope failure is a one of major process that causes severe landform variation and environment variation, and slope failure has become a major hidden...     

Power asymmetries and institutions: landscape conservation in central India

Understanding the importance of cross-sectoral implications of climate and socio-economic change in Scotland is essential for adaptation policy. This study explored the direct and indirect sectoral impacts of future change using the CLIMSAVE Integrated Assessment Platform. There is great spatial diversity in projected impacts across Scotland, and increasing uncertainty in the direction of change of impacts from the national to regional scale associated with climate uncertainty. Further uncertainty associated with socio-economic change results in 6 out of 13 indicators (artificial surfaces, biodiversity vulnerability, forest area, land-use intensity, irrigation usage and land-use diversity) with robust directions of change at the national scale and only three (artificial surfaces, forest area and irrigation usage) that are robust across all regions of Scotland. Complex interactions between socio-economic scenario assumptions (e.g. food imports, population and GDP), climatic suitability and agricultural productivity and profitability lead to significant national and regional changes in the distribution and extent of land cover types, with resultant cross-sectoral interactions with water, forestry and biodiversity. Consequently, stakeholders characterised robust adaptation policy options, within the CLIMSAVE participatory process, as those beneficial to society (and the country) in all scenarios, irrespective of the direction of change of the impacts. The integration in CLIMSAVE of a participatory scenario development process and an integrated participatory modelling framework has allowed the exploration of future uncertainty in a structured approach and better represented the importance of qualitative information and the social and institutional contexts within adaptation research.     

Can we infer avalanche–climate relations using tree-ring data? Case studies in the French Alps

Dendrogeomorphology is a powerful tool to determine past avalanche activity, but whether or not the obtained annually resolved chronologies are sufficiently detailed to infer avalanche–climate relationships (in terms of temporal resolution) remains an open question. In this work, avalanche activity is reconstructed in five paths of the French Alps and crossed with a set of snow and weather variables covering the period 1959–2009 on a monthly and annual (winter) basis. The variables which best explain avalanche activity are highlighted with an original variable selection procedure implemented within a logistic regression framework. The same approach is used for historical chronologies available for the same paths, as well as for the composite tree-ring/historical chronologies. Results suggest that dendrogeomorphic time series allow capturing the relations between snow or climate and avalanche occurrences to a certain extent. Weak links exist with annually resolved snow and weather variables and the different avalanche chronologies. On the contrary, clear statistical relations exist between these and monthly resolved snow and weather variables. In detail, tree rings seem to preferentially record avalanches triggered during cold winter storms with heavy precipitation. Conversely, historical avalanche data seem to contain a majority of events that were released later in the season and during episodes of strong positive temperature anomalies.     

Biodegradability of the anticancer drug etoposide and identification of the transformation products

Etoposide susceptibility to microbiological breakdown was studied in a batch biotransformation system, in the presence or absence of artificial wastewater containing nutrients, salts and activated sludge at two concentration levels. The primary focus of the present study was to study etoposide transformation products by ultra-high performance liquid chromatography coupled to high-resolution hybrid quadrupole-Orbitrap tandem mass spectrometry (MS/MS). Data-dependent experiments combining full-scan MS data with product ion spectra were acquired to identify the molecular ions of etoposide transformation products, to propose the molecular formulae and to elucidate their chemical structures. Due to the complexity of the matrix, visual inspection of the chromatograms showed no clear differences between the controls and the treated samples. Therefore, the software package MZmine was used to facilitate the identification of the transformation products and speed up the data analysis. In total, we propose five transformation products; among them, four are described as etoposide transformation products for the first time. Even though the chemical structures of these new compounds cannot be confirmed due to the lack of standards, their molecular formulae can be used to target them in monitoring studies.     

Structural regulation of electroplating sludge by a metal–organic framework synthesis method for an enhanced denitrification activity

Journal of Material Cycles and Waste Management - Electroplating sludge contained multi-metals and organics. In previous reports, electroplating sludges were usually recycled by direct calcination...