Muscle tetanus and loading condition effects on the elastic and viscous characteristics of the thorax

Thoracic deformation under an applied load is an established indicator of injury risk, but the force required to achieve an injurious level of deformation currently is not understood adequately. This article evaluates how two potentially important factors, loading condition and muscle tensing, affect the structural response of the dynamically loaded thorax. Structural models of two human cadaver thoraxes and two porcine thoraxes were used to quantify the effects. The human cadavers, which represent anthropometric extremes, were subjected to anterior loading from (1) a 5.1-cm-wide belt oriented diagonally (i.e., seatbelt-like loading), (2) a 15.2-cm-diameter rigid hub, and (3) a 20.3-cm-wide belt oriented laterally (i.e., a distributed load). A structural model having the mathematical formulation of a quasilinear viscoelastic material model was used to model the elastic and viscous response, with ramp-hold tests used to determine the model coefficients. The effect of thoracic musculature was assessed using similar ramp-hold tests on the porcine subjects, each with and without forced muscle contraction. Even maximally contracted thoracic musculature is shown to have a minimal effect on the response, with similar elastic and viscous characteristics exhibited by each subject regardless of muscle tone. The elastic response is shown to be approximately a factor of three stiffer for diagonal belt loading and for this distributed loading condition than for the hub loading, indicating that the response is influenced most by the particular anatomical structures that are engaged and, secondarily, by the area of load application. Specifically, shoulder involvement is shown to have a strong influence. The force relaxation is found to be pronounced, but insensitive to the loading condition, with long-time force relaxation coefficients (G( infinity )) in the range of 0.1 to 0.3. The findings of this study provide restraint-specific guidelines for the force-deflection characteristics of both physical and computational thoracic models.     

How future trends in societal aging, air bag availability, seat belt use, and fleet composition will affect serious injury risk and occurrence in the United States

The objective of this study was to quantify the importance of societal aging relative to other factors that are known to affect injury risk. An aging population's effect on Maximum Abbreviated Injury Scale (MAIS) 3+ injury trends for passenger car drivers in frontal crashes was projected and compared to the effects of projected changes in fleet composition, changes in seat belt usage, and changes in air bag availability. It was determined that increased frailty due to an aging population will result in 19,816 to 43,568 additional injuries to passenger car drivers in frontal crashes from 1996 to 2012. Aging was shown to have an effect similar to the increased presence of light trucks in the fleet (a cumulative increase of approximately 47,428 injuries). Aging and changing fleet composition were shown to have a smaller effect than the projected increases in seat belt use or air bag availability, though the effect of increased belt use is not much greater than the effect of aging. After 2012, however, air bag availability and seat belt use will plateau, while societal aging will continue.     

Valuing freshwater salmon habitat on the west coast of Canada

Changes in land use can potentially reduce the quality of fish habitat and affect the economic value of commercial and sport fisheries that rely on the affected stocks. Parks and protected areas that restrict land-use activities provide benefits, such as ecosystem services, in addition to recreation and preservation of wildlife. Placing values on these other benefits of protected areas poses a major challenge for land-use planning. In this paper, we present a framework for valuing benefits for fisheries from protecting areas from degradation, using the example of the Strait of Georgia coho salmon fishery in southern British Columbia, Canada. Our study improves upon previous methods used to value fish habitat in two major respects. First, we use a bioeconomic model of the coho fishery to derive estimates of value that are consistent with economic theory. Second, we estimate the value of changing the quality of fish habitat by using empirical analyses to link fish population dynamics with indices of land use in surrounding watersheds. In our example, we estimated that the value of protecting habitat ecosystem services is C$0.93 to C$2.63 per ha of drainage basin or about C$1322 to C$7010 per km of salmon stream length (C$1.00=US$0.71). Sensitivity analyses suggest that these values are relatively robust to different assumptions, and if anything, are likely to be minimum estimates. Thus, when comparing alternative uses of land, managers should consider ecosystem services from maintaining habitat for productive fish populations along with other benefits of protected areas.     

Hydrolysis of Polylactic Acid (PLA) and Polycaprolactone (PCL) in Aqueous Acetonitrile Solutions: Autocatalysis

Polylactic acid (PLA) is a hydrolytically degradable aliphatic polyester. The rate of polymer hydrolysis increases with time, and that has been attributed to the high reactivity of the terminal ester and the kinetics of autocatalysis. Hydrolysis is carried out in an acetonitrile/water solution to eliminate any solid-state contributions such as diffusion and crystallinity to the degradation process. A kinetic equation is derived to describe the autocatalytic effect of the increasing carboxylic acid end-group concentration. The results of solution hydrolysis are examined and found to fit the derived equation. Hydrolysis was also carried out with polycaprolactone (PCL) in acetonitrile, where reaction kinetics were found to differ from those of PLA. The PCL polymer required external acid catalysis by the addition of HCl, whereas hydrolysis of PLA was selfcatalyzed by the carboxylic acid end-groups.     

Using a geographical information system for monitoring space shuttle launches: Determining cumulative distribution of deposition and an empirical test of a spatial model

Space shuttle launches produce localized hydrochloric acid deposition. The interaction of solid rocket motor exhaust and deluge water released on the pad at the time of launch results in the formation of an exhaust cloud. The spatial pattern and extent of deposition from the launch cloud are predicted by the rocket exhaust effluent diffusion (REED) model. The actual pattern of deposition has been mapped by field surveys for each shuttle launch since 1981. In this paper we use a geographical information system (GIS) to compare model predictions with ground patterns for 49 shuttle launches. We also compile cumulative maps of deposition patterns needed to consider long-term impacts. The direction of launch cloud movement did not differ significantly from model predictions. The REED model overpredicted both the area that received deposition and the maximum distance from the launch pad that deposition occurred. Severe vegetation damage was restricted to near-field deposition areas within 1980 m north of each launch pad. Total area impacted from launches has been 87.0 ha around pad 39A and 52.9 ha around pad 39B. Far-field deposition has caused leaf spotting from acid droplets or aluminum oxide over a wider and more variable area than near-field. A total of 19,397 ha has received deposition, but 63.6% of this area has received deposition only one time and 92.2% not more than three times. GIS techniques provide means to test spatial models and compile information useful for assessing cumulative impacts.     

The readability of federal land management plans

Regulations to implement the National Environmental Policy Act state that environmental impact statements shall be written in plain language. Federal land management agencies operate under this guideline when they prepare plans for their lands. We examined 23 agency plans, using the Flesch Reading Ease Scale, to determine if they met this criterion. The scores show that the plans are written for people with three to six years of college education, far beyond the reading ability of the average person. The results suggest that the plans may limit or bias who participates in agency planning. National policy on the readability of the plans needs to be clarified, and agencies need to evaluate, and defend or revise, their writing programs.     

GROUND WATER QUALITY PREDICTION USING CLIMATIC INDICES1

ABSTRACT: Drought affects the quality of ground water in certain aquifers used by municipalities in Kansas. Water quality changes occur as a function of the amount of water available for recharge and hence to dilute more mineralized ground waters. Several measures of meteorological drought, including the Palmer Index and Eagleman Aridity Index, were correlated with water quality data to determine the degree of association. Several locations showed sharp delinces in water quality as the drought progressed. These relationships can be used to predict possible variations in present and future well-water supplies in locations subject to drought induced water quality deterioration.     

Characterization of physicochemical properties of beryllium aerosols associated with prevalence of chronic beryllium disease

Little is known about the physicochemical properties of beryllium aerosols associated with increased risk of beryllium sensitization and chronic beryllium disease (CBD). Such information is needed to evaluate whether airborne mass of beryllium is the appropriate metric of exposure or alternatively to provide a scientific basis for using information on particle size, surface area, and chemistry to support an improved exposure limit based on bioavailability through the inhalation and dermal routes of exposure. Thus, we used a suite of analytical techniques to characterize aerodynamically size-fractionated beryllium particles and powders that have been associated in epidemiological studies with higher prevalence of CBD. Aerosol particles were sampled from the ventilation systems of production lines for powders of beryllium metal and beryllium oxide and for ingots of copper-beryllium alloy. End product powders from the metal and oxide production lines were also collected.Particles released during production of beryllium metal were found to be complex, having heterogeneous composition, including reactive species such as fluorine. Powders from beryllium metal production were of high purity with only a minor component of beryllium oxide. Both particles and powders from oxide production were high-purity oxide. Particles released during production of copper-beryllium alloy were heterogeneous, being predominantly copper oxides. Thus, all particles and powders contain at least some beryllium in the form of beryllium oxide.These data justify efforts to thoroughly characterize beryllium aerosol properties when performing exposure assessments. The data also suggest that differences in particle chemical composition, size, number, and surface area may influence bioavailability of beryllium and contribute to risk of CBD. However, a scientific basis does not yet exist to replace mass as the current metric of exposure.     

Sources of lead and zinc associated with metal smelting activities in the Trail area,British Columbia,Canada

The spatial distribution and deposition of lead and zinc emitted from the Trail smelter, British Columbia, Canada, was studied by strategically locating moss bags in the area surrounding the smelter and monitoring the deposition of elements every three months. A combined diffusion/distribution model was applied to estimate the relative contribution of stack-emitted material and material emitted from the secondary sources (e.g., wind-blown dust from ore/slag storage piles, uncovered transportation/trucking of ore, and historical dust). The results indicate that secondary sources are the major contributor of lead and zinc deposited within a short distance from the smelter. Gradually, the stack emissions become the main source of Pb and Zn at greater distances from the smelter. Typical material originating from each source was characterized by SEM/EDX, which indicated a marked difference in their morphology and chemical composition.     

Use of the instream flow incremental methodology: A tool for negotiation

The resolution of conflicts arising from differing values and water uses requires technical information and negotiating skills. This article outlines the Instream Flow Incremental Methodology (IFIM), developed by the US Fish and Wildlife Service, and demonstrates that its use to quantify flows necessary to protect desired instream values aids negotiation by illustrating areas of agreement and possible compromises between conflicting water interests. Pursuant to a Section 404 permit application to the US Army Corps of Engineers made by City Utilities of Springfield, Missouri, in 1978, IFIM provided the means by which City Utilities, concerned with a secure water supply for a growing population, and those advocating instream values were satisfied that their requirements were met. In tracing the 15-month process, the authors conclude that the application of IFIM, as well as the cooperative stance adopted by the parties involved, were the key ingredients of the successful permit application.