Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

UV/H2O2 oxidation of tri(2-chloroethyl) phosphate: Intermediate products, degradation pathway and toxicity evaluation

Tri(2-chloroethyl) phosphate (TCEP) with the initial concentration of 5 mg/L was degraded by UV/H₂O₂ oxidation process. The removal rate of TCEP in the UV/H₂O₂ system was 89.1% with the production of Cl^? and PO₄^3? of 0.23 and 0.64 mg/L. The removal rate of total organic carbon of the reaction was 48.8% and the pH reached 3.3 after the reaction. The oxidative degradation process of TCEP in the UV/H₂O₂ system obeyed the first order kinetic reaction with the apparent rate constant of 0.0025 min^?1 (R²=0.9788). The intermediate products were isolated and identified by gas chromatography-mass spectrometer. The addition reaction of HO? and H₂O and the oxidation reaction with H₂O₂ were found during the degradation pathway of 5 mg/L TCEP in the UV/H₂O₂ system. For the first time, environment risk was estimated via the “ecological structure activity relationships” program and acute and chronic toxicity changes of intermediate products were pointed out. The luminescence inhibition rate of photobacterium was used to evaluate the acute toxicity of intermediate products. The results showed that the toxicity of the intermediate products increased with the increase of reaction time, which may be due to the production of chlorine compounds. Some measures should be introduced to the UV/H₂O₂ system to remove the highly toxic Cl-containing compounds, such as a nanofiltration or reverse osmosis unit.     

Photodegradation of Hexafluoropropylene Oxide Trimer Acid under UV Irradiation

As a novel alternative to traditional perfluoroalkyl substances (PFASs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), hexafluoroproplyene oxide trimer acid (HFPO-TA) has been detected worldwide in surface water. Moreover, recent researches have demonstrated that HFPO-TA has stronger bioaccumulation potential and higher hepatotoxicity than PFOA. To treat these contaminants e.g. PFOA and PFOS, some photochemical techniques by adding exogenous substances had been reported. However, there is still no report for the behavior of HFPO-TA itself under direct UV irradiation. The current study investigated the photo-transformation of HFPO-TA under UV irradiation in aqueous solution. After 72 hr photoreaction, 75% degradation ratio and 25% defluorination ratio were achieved under ambient condition. Reducing active species, i.e., hydrated electrons and active hydrogen atoms, generated from water splitting played dominant roles in degradation of HFPO-TA, which was confirmed by different effects of reaction atmospheres and quenching experiments. A possible degradation pathway was proposed based on the products identification and theoretical calculations. In general, HFPO-TA would be transformed into shorter-chain PFASs, including hexafluoropropylene oxide dimer acid (HFPO-DA), perfluoropropionic acid (PFA) and trifluoroacetate (TFA). This research provides basic information for HFPO-TA photodegradation process and is essential to develop novel remediation techniques for HFPO-TA and other alternatives with similar structures.     

含油污泥处理技术进展

石油工业生产的特征固体废物——含油污泥,是一种由石油烃、水、固体颗粒物和其他物质（如重金属）组成的固态/半固态复合物,因毒性和易燃性被归入危险废物管理。我国含油污泥年产量高达500万t,其中含有15%~50%的石油烃。含油污泥的处理要兼顾无害化和资源化。基于其组成、性质和危害,介绍了含油污泥的油品资源化分离法（离心、溶剂萃取、热解）和无害化剩余含油残渣处理法（焚烧、固化、生物处理）等国内外常用的处理方法。大体上,含油污泥的处理思路为,首先预处理降低含水率、提高含油率,再经油品分离法回收含油污泥中的石油烃,最后无害化处理剩余含油残渣。讨论了各方法的特点以及国内外研究进展,提出了含油污泥处理技术的发展建议。     

基于环境统计调查数据的中国省会城市煤炭消费变化历史趋势研究

煤炭是我国主要能源,分析煤炭消费变化趋势对于预测我国二氧化碳及大气污染物排放具有重要意义。基于全国环境统计调查数据,分析了2011—2018年主要城市煤炭消费的利用情况,利用热力聚类图对我国省会城市（含直辖市）聚类分析其工业源和生活源的煤炭消费趋势,并按东部、中部和西部城市进行煤炭消费的区域性对比。结论如下:通过聚类分析发现,位于同一簇的城市之间工业企业煤炭消耗总量的基数和变化趋势有一定的相似性;总体上,城市工业企业的煤炭消耗呈逐年递减趋势,东部城市煤炭消耗总量高于中部、西部城市煤炭消耗总量,东部城市煤炭消费量下降情况总体好于中部和西部城市;除北京等少数城市外,电力、热力生产和供应行业每年的煤炭消耗量基本变化不大;城市生活源煤炭消费量变化趋势总体呈逐年递减趋势,西部呈上升趋势,东部、中部城市呈下降趋势;东部城市中的城市总煤炭消费达峰情况优于中部、西部城市。     

澜沧江下游过饱和TDG时空分布及影响因素

为掌握澜沧江下游流域过饱和总溶解气体时空分布特征及影响因素,文章基于2018年澜沧江下游10个断面TDG过饱和度监测数据,采用空间数据统计方法和IDW插值法探究该流域过饱和总溶解气体时空分布规律,并运用相关性分析和主成分分析探讨TDG过饱和度的影响因素。结果显示:(1)澜沧江下游干、支流水体TDG过饱和度均呈枯水期略大于丰水期和平水期的季节分布规律。(2)从空间看,干流TDG过饱和度从大朝山到允景洪水电站整体呈沿程下降趋势,但糯扎渡坝上明显高于临近的上游、下游河段;3条主要支流从上游到下游同呈下降趋势。(3)澜沧江流域下游水体TDG过饱和度与pH和溶解氧呈极显著相关关系,与氧化还原电位、总溶解固体、盐度相关性显著;主成分分析发现,影响TDG过饱和度的主要因素为固体溶解能力和氧化还原能力。     

基于BP神经网络的三峡库区土壤侵蚀强度模拟

降雨侵蚀力变化是一复杂过程,其变化存在一定的随机波动性,土壤侵蚀是三峡库区生态环境脆弱最主要的影响因素之一,查明库区土壤侵蚀强度的演化过程及未来趋势是库区生态文明建设过程中急需解决的关键科学问题。论文基于三峡库区1990年侵蚀降雨特征,利用BP神经网络对2010年75个站点降雨侵蚀力进行模拟、验证,预测2030年75个站点降雨侵蚀力。选取2030年预测结果中位于库区周围的27个站点,结合2030年库区自然增长、生态保护情景下土地利用模拟数据,使用RUSLE计算2030年土壤侵蚀强度。结果表明：1）2010年库区降雨侵蚀力模拟相对误差为15%,测试样本数据相对误差为14.67%,预测相对误差为19.65%,NE系数为0.85,说明BP神经网络对库区降雨侵蚀力具有良好模拟效果;2）2010年库区土壤侵蚀强度的Kappa指数为0.75,计算结果能满足模拟与预测需求;3）在土地利用不变情况下,2030年库区轻度、中度侵蚀面积均有所增加,微度及强烈以上侵蚀面积均呈减少趋势,且侵蚀强度转变中的58%来源于相邻侵蚀强度,跨侵蚀等级区的较少;4）在降雨侵蚀力不变情况下,自然增长、生态保护情景下未来土地利用变化所导致的土壤侵蚀均呈下降趋势,后者下降的趋势更为明显;5）在降雨侵蚀力及土地利用均变化的情况下,自然增长、生态保护情景下土壤侵蚀均呈下降趋势。     

Regionalization based on spatial and seasonal variation in ground-level ozone concentrations across China

Owing to the vast territory of China and strong regional characteristic of ozone pollution,it's desirable for policy makers to have a targeted and prioritized regulation and ozone pollution control strategy in China based on scientific evidences. It's important to assess its current pollution status as well as spatial and temporal variation patterns across China.Recent advances of national monitoring networks provide an opportunity to insight the actions of ozone pollution. Here, we present rotated empirical orthogonal function(REOF)analysis that was used on studying the spatiotemporal characteristics of daily ozone concentrations. Based on results of REOF analysis in pollution seasons for 3 years' observations, twelve regions with clear patterns were identified in China. The patterns of temporal variation of ozone in each region were separated well and different from each other, reflecting local meteorological, photochemical or pollution features. A rising trend in annual averaged Eight-hour Average Ozone Concentrations(O_3-8 hr) from 2014 to 2016 was observed for all regions, except for the Tibetan Plateau. The mean values of annual and 90 percentile concentrations for all 338 cities were 82.6 ± 14.6 and 133.9 ± 25.8 μg/m~3,respectively, in 2015. The regionalization results of ozone were found to be influenced greatly by terrain features, indicating significant terrain and landform effects on ozone spatial correlations. Among 12 regions, North China Plain, Huanghuai Plain, Central Yangtze River Plain, Pearl River Delta and Sichuan Basin were realized as priority regions for mitigation strategies, due to their higher ozone concentrations and dense population.     

基于短时傅里叶变换的干扰信号识别方法

目的提高无线电引信识别欺骗式干扰的能力。方法根据炮弹弹体自旋的特点,使得采用连续波线极化天线的无线电引信所收到的干扰信号呈现出有别于地面回波的周期性幅度调制特征,通过对此特征进行短时傅里叶变换后进行识别,可以作为无线电引信是否受到欺骗式干扰的判断依据。结果通过仿真和试验对方法的可行性进行了验证,表明该识别方法可以很好地提高连续波无线电引信的识别欺骗式干扰的能力。结论基于短时傅里叶变换检测旋转调制的对地旋转弹无线电引信欺骗干扰识别的方法可以对干扰信号特征进行识别,算法处理时间短,能够作为引信是否受到干扰的一种判断依据。