Biosorption potential of Cr(VI) by Kocuria sp. ASB107, a radio-resistant bacterium isolated from Ramsar,Iran

Heavy metal pollution in soil and wastewater is a worldwide environmental issue in which microorganisms play a significant role for its removal. In the present study, biosorption of Cr(VI) by the live and dead cells of Kocuria sp. ASB107, a radio-resistant bacterium, was investigated. The effect of contact time, solution pH, initial hexavalent chromium concentration and adsorbent dose on biosorption efficiency was studied. Also, live cells were further immobilised on various matrices by different techniques and then were examined for tolerance to chromium biosorption. Experimental results indicated that the removal efficiency of chromium increased with decrease in pH, initial Cr(VI) concentration, and also increase in adsorbent dose and the contact time. The maximum removal efficiency of live and dead cells at acidic pH of 4–4.5, contact time of 24 hours, adsorbent dose 1.6?g/100?mL and initial chromium concentration 25?mg/L were 82.4% and 69.2%, respectively. The adsorption data was described well by Langmuir isotherm model. Among all immobilisation techniques tested, cross-linking showed the highest biosorption of Cr(VI). Results indicated that live cells of Kocuria sp. ASB107 were better than dead ones.     

Optimization and determination of Cd (II) in different environmental water samples with dispersive liquid�Cliquid microextraction preconcentration combined with inductively coupled plasma optical emission spectrometry

Dispersive liquid?Cliquid microextraction followed by inductively coupled plasma-optical emission spectrometry has been investigated for determination of Cd(II) ions in water samples. Ammonium pyrrolidine dithiocarbamate was used as chelating agent. Several factors influencing the microextraction efficiency of Cd (II) ions such as extracting and dispersing solvent type and their volumes, pH, sample volume, and salting effect were optimized. The optimization was performed both via one variable at a time, and central composite design methods and the optimum conditions were selected. Both optimization methods showed nearly the same results: sample size 5 mL; dispersive solvent ethanol; dispersive solvent volume 2 mL; extracting solvent chloroform; extracting solvent volume 200  $\upmu $ L; pH and salt amount do not affect significantly the microextraction efficiency. The limits of detection and quantification were 0.8 and 2.5 ng L^???1, respectively. The relative standard deviation for five replicate measurements of 0.50 mg L^???1 of Cd (II) was 4.4%. The recoveries for the spiked real samples from tap, mineral, river, dam, and sea waters samples ranged from 92.2% to 104.5%.     

Heavy metals removal/stabilization from municipal solid waste incineration fly ash: a review and recent trends

Waste treatment using thermal technologies, such as incineration, leads to the production of pollutants and wastes, including fly ash (FA). Fly ash contains heavy metals (HMs) and other contaminants and can potentially pose high risks to the environment and negatively impact health and safety. Consequently, stabilizing fly ash prior to either use or landfilling is crucial. The toxicity of fly ash through heavy metal leaching can be assessed using leaching tests. The leaching rates of heavy metals primarily depend on the surrounding conditions as well as fly ash properties and metal speciation. Physical separation, leaching or extraction, thermal treatment and solidification/chemical stabilization are proposed as suitable approaches for fly ash treatment. Economic considerations, environmental concerns, energy consumption and processing times can define the efficiency and selection of the treatment approach. This review considers the latest findings and compares the advantages and shortcomings of different fly ash treatment methods with the aim of highlighting the recent advances in the field. The review concludes that the simultaneous implementation of various methods can lead to highly efficient heavy metals removal/stabilization while simultaneously taking economic and environmental considerations into account.

     

The detection of SARS-CoV-2 RNA in indoor air of dental clinics during the COVID-19 pandemic

Environmental Science and Pollution Research - In the indoor environment of dental clinics, dental personnel and patients are exposed to a risk of infection because of the transmission of...     

Investigating the quantitative and qualitative status of effluent in the wastewater treatment plant in Iran Central Iron Ore

The aim of present study was to investigate the quality of the produced effluent from different units of the Iran Central Iron Ore in Bafq city and comparison of effluent with the standards. This study presents the physicochemical and biological parameters data of effluent of three Sequencing batch reactors (SBR) with a capacity of 160 m³?d^?1. Most common parameters include pH, total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), biochemical oxygen demand (BOD₅), chemical oxygen demand (COD), heavy metals, and total coliforms and fecal coliforms as biological indicators. Then, for each SBR system, the average of each parameter was determined, and results were compared with the standard recommended by the Iranian Environmental Protection Agency. Based on the results, some of the parameters, including BOD₅, COD, and TSS in the wastewater treatment plant (WWTP) effluent, are higher than the permitted amount for discharge to the surface water. Considering the BOD₅, COD, and TSS concentration in WWTPs, the treated wastewater is only suitable for agricultural and irrigation use. Therefore, wastewater produced by Iran Central Iron Ore Co. will need additional treatment to achieve standard quality of water before discharge in surface water and adsorbent well.     

Removal of antibiotics from aqueous solutions by nanoparticles: a systematic review and meta-analysis

Environmental Science and Pollution Research - Antibiotics, as one of the emerging pollutants, are non-biodegradable compounds and long-term exposure to them may affect endocrine, hormonal, and...     

Effect of Habitat Complexity on Richness, Abundance and Distributional Pattern of Forest Birds

Structurally complex forests provide more diverse conditions in comparison to homogenous forests because of greater variety of microhabitats and trees. This study assesses the association of bird species richness, abundance, and distributional pattern with habitat complexity (HC) in Kheyrud Forest in the north of Iran. Birds were surveyed during spring 2009 by 100 point counts. In each point count six habitat features related to the index of HC were computed and scored from 0 to 3. Then the scores were summed and divided into two groups of low and high complexity, HC ≤ 6 and HC > 6, respectively. To compare bird richness and abundance in different HCs, a two sample t-test was used. Presence and absence of bird species at each plot as a dependent variable were compared with the vegetation characteristics as an independent variable by means of the Canonical Correspondence Analysis. The results revealed bird species richness and abundance were significantly higher in more complex habitats. Bird species can be divided into two groups, the first group including species which associated with late successional stages and the second group, species belonging to early successional stages. Numbers of birds belonging to the first group declined in less complex forests, whereas the numbers of birds belonging to the second group increased. At the stand scale, our results reveal that bird abundance and richness are strongly associated with the complexity of vegetation structure in the study area.     

Electron transfer sensitized photodechlorination of surfactant solubilized PCB 138

Sensitized photodechlorination of polychlorinated biphenyl, PCB 138, in three different surfactant solutions was studied. The sensitizer of choice was leuco-methylene blue, which was produced in situ from methylene blue using either triethylamine or sodium borohydride. Three types of surfactants, anionic (SDS), neutral (TWEEN 80), and cationic (CTAB) at different concentrations were investigated. The neutral and cationic surfactants were found to be more effective than anionic. In each case the surfactant concentration was found to play a significant role in the rate of dechlorination. For different sensitized systems (triethylamine or sodium borohydride), a different product distribution and a different pathway of dechlorination was observed.