Reduction of natural resource consumption in cement production in Japan by waste utilization

According to Japanese government policy, the input of natural resources should be minimized and input resources should be utilized to the greatest extent possible so that, eventually, minimum waste is generated. The cement industry of Japan has worked hard to maximize waste utilization. Focusing on the cumulative amounts of the elements needed for clinker and gross calorific values, this study estimated the extent to which waste utilization has directly or indirectly reduced natural resource consumption and greenhouse gas emissions associated with cement production at 32 factories in Japan and clarified the effect of waste utilization in the cement industry on the resource productivity of Japan based on information for fiscal year 2008. Had no wastes been utilized, the cement industry consumption of limestone would have been 18% higher; of clay, 2,899% higher; and of energy, 22% higher. The utilization of wastes in the mixing and burning process of cement production directly reduced greenhouse gas emissions (12% emitted gas reduction) by a larger amount than the indirect reduction achieved by their utilization during the admixing process (10% reduction). Waste utilization for cement production contributed to an increase in resource productivity of about 8,000 Japanese Yen/ton.     

Properties and biodegradability of chain-extended copoly(succinic anhydride/ethylene oxide)

Chain-extension reactions were carried out using titanium-iso-propoxide (TIP) as a catalyst for a series of polyesters or copolyesterethers with low molecular weights (M _n =1500–10,000) synthesized by the ring-opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO). The copolymers having aM _n from 25,000 to 50,000 of different properties were obtained. Both the melting point (T _m ) and the fusion heat (H), which indicate the crystallinity of the copolymers, rose with an increase in SA content in the copolymers. Semitransparent films were prepared by compression molding of the copolymers. The biodegradation of the copolymer films was evaluated by enzymatic hydrolysis by lipases and by an aerobic gas evolution test in standard activated sludge. The hydrolyzability of these copolymers by three kinds of lipases was affected by their copolymer composition SA/EO, form, andM _n . The copolyesterether (SA/EO=43/57,M _n =48,900) was more easily biodegraded by standard activated sludge compared to the polyester (SA/EO=47/53,M _n =36,300).Presented at the Pacifichem-95, December 17–22, 1995, Honolulu, Hawaii.     

Continuous treatment of azo acid dyes by photo-dependent denitrifying sludge

Simultaneous removals of dye and nitrate by photo-dependent denitrifying sludge(PDDS)have been demonstrated in a continuousflow bench-scale reactor.The best C/N for the degradation of azo dyes by PDDS was 1.5.The specific removal rate of azo dye AB92 decreased with a decrease in hydraulic retention time and increased with a decrease in solids retention time.The degradation rate of TOC decreased with a decrease in hydraulic retention time.AB92,which has nitro and hydroxyl substitutions in non-para positions,was uniquely degraded.During continuous flow treatment experiments using PDDS,complete degradation of azo dyes AB92 and AO20 at influent concentrations of 40mg/L and 30mg/L,respectively,was achieved with an HRT of 16.     

Influence of coexisting surface-active agents on leachability of dioxins in raw and treated fly ash from an MSW incinerator

The leaching behavior of dioxins from raw and treated fly ash (FA) under the coexistence of several types of surface-active agents (SAAs) was examined by batch leaching tests to obtain significant information not only for evaluating leachability of dioxins as hydrophobic organic pollutants (HOPs) under the severe environment in which SAAs coexist, but also for evaluating the reduction efficiency of dioxin-leachability from the treated FA. Enhancement of dioxin-leachability by sufficient addition of SAAs was observed in the leaching test, whereas addition of a smaller quantity depressed the leachability. The higher the degree of chlorination in PCDDs/PCDFs homologues, the more effectively the SAAs enhanced the leachability. Moreover, there was a large difference in the potential for leachability enhancement due to each surface activity, based on critical micelle concentration (CMC) of the SAAs although Aldrich humic acid enhanced the leachability at a much lower concentration than CMC. A comparison of the leachability in FA treated by several methods showed a difference in the reduction efficiency of leachability, depending on the adsorption of SAAs by each treated FA.     

Sensitivity analysis of radionuclide migration in compacted bentonite: a mechanistic model approach

Mechanistic model calculations for the migration of Cs, Ra, Am and Pb in compacted bentonite have been carried out to evaluate sensitivities with respect to different parameter variations. A surface chemical speciation/electric double layer model is used to calculate: (i) porewater composition and radionuclide speciation in solution and at the bentonite surface, yielding the distribution of mobile and sorbed species and (ii) interaction of diffusing species with negatively charged pore walls to obtain diffusion parameters. The basic scenario considers the interaction of compacted bentonite with a fresh-type groundwater; variations include the presence of bentonite impurities and saline groundwater. It is shown that these scenarios result in significant variations of porewater composition that affect migration via three mechanisms that can partly compensate each other: (1) effects on sorption through radionuclide complexation in solution, and competition of major cations for surface sites; (2) changes in radionuclide solution speciation leading to different diffusing species under different conditions; (3) effects on diffusion through changes in the electric double layer properties of the clay pores as a function of ionic strength.     

Evaluation of river pollution of neonicotinoids in Osaka City (Japan) by LC/MS with dopant-assisted photoionisation

An atmospheric pressure photoionisation (APPI) source for liquid chromatography/mass spectrometry (LC/MS) was applied to determine neonicotinoid pesticides in the aquatic environment. Dopant-assisted APPI was very effective in the ionisation of neonicotinoids. Neonicotinoids generated protonated molecules in APPI with high sensitivity, while adduct ions, such as sodiated molecules, were predominantly generated in conventional electrospray ionisation. The ionisation of neonicotinoids was confirmed by ultra-high-resolution MS. An analytical method coupled with solid phase extraction was developed for acetamiprid, clothianidin, dinotefuran, imidacloprid, nitenpyram, and thiamethoxam. Method detection limits were 0.47 to 2.1 ng L(-1) for six neonicotinoids. Dinotefuran was the most frequent and highest among the neonicotinoids examined in the aquatic environment in Osaka, Japan. The maximum concentration of dinotefuran was 220 ng L(-1). Given the toxicity of neonicotinoids for aquatic creatures, the concentrations observed here were substantially low. The change in concentrations was temporally coincident with the period of the neonicotinoid application. Although rapid photodegradation and some degradation products have been elucidated, the degradation products in the aquatic environment were not identified in the present study.     

Measuring future dynamics of genuine saving with changes of population and technology: application of an integrated assessment model

Theoretical and empirical studies have been conducted on the genuine saving (GS) based on neoclassical economic theory to assess sustainable development (SD). However, only market prices and statistical national accounts have been used in empirical studies due to limited data availability. The data availability limits to measure GS only in the past and current, causing a wide gap with theoretical results. In this paper, we propose computing GS using an integrated assessment model (IAM) as connected to the mainframe model of macroeconomy. This enables us to use shadow prices, rather than market prices, obtained through an IAM, which ensures substantial consistency among variables. An example would be endogenous capital–output ratio and the rate of TFP. Also, our indicator of GS is more comprehensive in that they now account for various resources, environmental degradation, and land use. Our simulation results, with a particular focus on GS with population change (GSn) and with technological change as well (GSnt), show a sustainable future for up to the end of the century thanks to declining population in the latter half of the century and technological progress, although GS without accounting for population and technology tend to be negative, driven by, among others, capital depreciation and net primary productivity degraded by land use.