Coagulation characteristics of humic acid modified with glucosamine or taurine

To suppress the coagulation of humic acid (HA) in aqueous solutions, HA was modified with hydrophilic amines, such as glucosamine or taurine. These amines were attached to carboxyl groups in HA via amide bond formation. The degree of modification (R(m)) was estimated to be 21-38%. Infrared spectra of the modified HAs were also consistent with the presence of amide bonds. Acid-base titration showed that the average acid-dissociation constant (pK(app)) of the HA samples was increased by the modification. The Ca(2+) binding capacity of HA decreased with an increase in R(m) value. Critical pH or Ca(2+) concentration, at which HA coagulation occurs, was increased as the result of the modification. These critical points for taurine-HA were higher than those for glucosamine-HA. This is mainly due to electrostatic repulsion by sulfonate groups in taurine. These results indicate that the coagulation of HA is suppressed by modifying the molecules with glucosamine or taurine.     

Study on 14C-BHA absorption and distribution in rat

BHA was administered to rats at doses of 5 or 500 mg/kg for seven days. ¹⁴C-BHA absorption was investigated on the eighth day and compared with animals receiving a single dose of 5 or 500 mg/kg BHA. Absorption of ¹⁴C-BHA was proportionately greater at the high dose rats. ¹⁴C distribution was 3–6 times higher in the forestomach than in the pyloric region of the stomach. The urinary excretion of BHA conjugates was not dependent on pretreatment with BHA or on the dose.     

A practical and simple method in fractional determination of ambient forms of mercury in air

A collecting method to prepare a fractional determination of ambient forms of mercury in air is proposed. Particulate mercury is collected by a glass fiber filter. Sequential trap tubes consist of four long and slender quartz tubes, in which the Chromosorb W treated with HC$\text{l}$ gas for Hg(II), the Chromosorb W treated with 0.1 M NaOH for methylmercury, the silver-wire tip for metallic mercury and the gold plate tip for dimethylmercury are packed. The collection efficiency for these trap tubes was in the range of about 85 ～ 100% at the μg or ng concentration level. With this method, the air was collected by suction at the rate of 1.5 $\text{l}$/min. for about five hours, the detection limit being 0.2 ng Hg/m³. The results indicate that the regional distribution of total mercury in air was considerably greater in the volcanic and hot spring regions. Mercury species was found to be mostly Hg(II), followed by metallic mercury, methylmercury, dimethylmercury and particulate mercury in this order.     

Effect of humic acids on the toxicity of pollutants to Chlamydomonas reinhardtii: Investigation by a microscale algal growth inhibition test

Dissolved humic substances (DHSs) are the major components of organic matter in the aquatic environment. DHSs are well known to considerably affect the speciation, solubility, and toxicity of a wide variety of pollutants in the aquatic environment. In this study, the effects of the toxicity of heavy metals and hydrophobic organic pollutants (HOPs) on Chlamydomonas reinhardtii in the presence of humic acid (HA) were examined by a microscale algal growth inhibition (μ-AGI) test based on spectrophotometric detection. To clarify the relationship between the chemical properties of HAs and the toxicity change of pollutants, eight HAs from different sources were prepared and used. HAs were responsible for mitigating the toxicity of Hg, Cu, pesticides (γ-HCH, 2,4-D, and DDT), and polycyclic aromatic hydrocarbons (PAHs) such as naphthalene (Nap), anthracene (Ant), and benzo[a]pyrene (BaP). In particular, an approximately 100-fold decrease in the toxicity of BaP was observed in the presence of 10 ppm HAs extracted from tropical peat. The results indicated that the carboxylic group content and the HA molecular weight are correlated to the changes in the heavy metal toxicity. For HOPs, the aromaticity and polarity of HAs are crucial for mitigating their toxicity. Furthermore, it was clearly shown that the lake water including a high concentration of DHSs collected from Central Kalimantan, Indonesia, reduced the toxicity of Hg and γ-HCH on Chlamydomonas reinhardtii.

Graphical abstract

     

Analysis of the migration of instantaneously injected cesium in artificial fractures of Lac du Bonnet granite, Manitoba, Canada

Breakthrough curves of ¹³⁷Cs and tritiated water injected instantaneously into artificial fractures in Lac du Bonnet granite were analyzed using the analytical solution for a single rock-fracture system and assuming the linear sorption isotherm of the solute. Parameters of nuclide diffusion and sorption in rock matrices, obtained by fitting, varied depending on the flow velocity in the fractures. According to theoretical calculations, different fracture flow velocities lead to different diffusion distances of nuclides in matrices at the same injection volume. As microscopic inhomogeneity is considered to exist in the rock matrix, the average diffusion-sorption characteristics of the matrix within the diffusion distance may have varied with the fracture flow velocity. Surface sorption was marked in fractures that had relatively high matrix sorption-diffusion capacities. The phenomenon was interpreted using the theoretical relationships developed between the surface sorption, matrix sorption and pore diffusion coefficient, and the porosity of matrices.The effect of the nonlinear sorption of solute was examined by numerically solving model equations that incorporate the nonlinear isotherm. This incorporation may contribute to the reduction of deviations between theoretical and experimental BTC's.     

Characterization of activated carbon fiber filters for pressure drop, submicrometer particulate collection, and mercury capture

The use of activated carbon fiber (ACF) filters for the capture of particulate matter and elemental Hg is demonstrated. The pressure drop and particle collection efficiency characteristics of the ACF filters were established at two different face velocities and for two different aerosols: spherical NaCl and combustion-generated silica particles. The clean ACF filter specific resistance was 153 kg m-2 sec-1. The experimental specific resistance for cake filtration was 1.6 x 10(6) sec-1 and 2.4 x 10(5) sec-1 for 0.5- and 1.5-micron mass median diameter particles, respectively. The resistance factor R was approximately 2, similar to that for the high-efficiency particulate air filters. There was a discrepancy in the measured particle collection efficiencies and those predicted by theory. The use of the ACF filter for elemental Hg capture was illustrated, and the breakthrough characteristic was established. The capacity of the ACF filter for Hg capture was similar to other powdered activated carbons.     

A cross-border recycling system in Asia under the resource and environmental constraints: a challenging project by the city of Kitakyushu and the city of Tianjin

In this article, we present an overview of the current circumstances of the trade of recyclable resources, i.e. end-of-life products, parts and materials, and recycled resources in Asian countries, indicating that pollution potential is spreading there due to the improper handling of those resources. Conversely, Japan’s domestic recycling activities are shown to be adversely affected by the increasing outflow of those resources on one hand and the sudden stagnation of trade on the other. Considering that cross-border resource circulation in Asia is unavoidable and desirable in certain conditions, we propose a feasible and sustainable transaction scheme of recyclable and recycled resources, exemplified by a project which was carried out by the city of Kitakyushu and the city of Tianjin.     

IV. Recovery of Flue Gas Sulfur as Ammonium Phosphate

The present development in industry has greatly increased the consumption of fossil fuel all over the world. The sulfur present in these fuels on combustion impairs the atmosphere and has to be removed before or after combustion. Direct desulfurization is still in its initial stage of commercial application and is thought to be rather expensive. Most projects today are concerned with flue gas desulfurization and a few people have been successful in the pilot plant scale. Flue gas sulfur is usually recovered as sulfuric acid or ammonium sulfate. The Kiyoura-T.I.T. process employs a completely dry method to recover this sulfur as ammonium sulfate. However, the present trends in fertilizers show that there is a marked drop in the consumption of this type of fertilizer except for China and other Asian countries.

Experiments were carried out to produce a high grade phosphatic fertilizer with a larger field of application. The authors were successful in rendering the phosphate in phosphate rock water soluble by reacting it with the sulfate radical of the ammonium sulfate. Ammonium acid sulfate was used in the experiments and the phosphate radical was determined by a colorimeter utilizing the ammonium molybdate method.

The results showed a conversion and an extractability of 98%, when the molecular ratio of ammonium acid sulfate to the CaO in phosphate rock was in the vicinity of 1:1.4-1.5. The reaction time was 120-180 minutes.

The extracted liquid was crystallized and put through X ray diffractometer experiments which showed that most of the crystals were ammonium phosphate containing about 15% N and 39% P₂O₅ on a dry basis. Thus, it is evident that this could be effectively applied in a commercial scale plant, recovering the flue gas sulfur as ammonium phosphate. The Kiyoura-T.I.T. process can be utilized to recover the flue gas sulfur either as the sulfate or as the phosphate.     

Dose-response relationships in mutagenicity assays including an appropriate positive control group: a multiple testing approach

The objective of mutagenicity assays in regulatory toxicology is the decision on non-mutagenicity or mutagenicity. An inherent problem of statistical tests is the possibility of false decisions, i.e., a mutagenic substance will be falsely labeled as non-mutagenic or a non-mutagenic substance will be falsely labeled as mutagenic. These probabilities of false negative (consumer's risk=type II error) and/or false positive decision (producer's risk=type I error) can be limited by using suitable testing procedures as well as a design including an appropriate positive control. Using the proof of hazard concept the well-known many-to-one procedures with total order restriction for increasing effect differences are used, while using the proof of safety concept procedures on equivalence with total order restriction are discussed. Both approaches are demonstrated on a real data example.