Effects of different soil pH and nitrogen fertilizers on Bidens pilosa L. Cd accumulation

Environmental Science and Pollution Research - Bidens pilosa L. was a Cd hyperaccumulator. This experiment determined the effects of different soil pH (adjusted by weak acid and alkali at 4.83,...     

Pesticide effects on crabs: How environmental concentrations of endosulfan and chlorpyrifos affect embryos

The objectives of this work were to evaluate the effects of environmentally relevant chlorpyrifos and endosulfan, concentrations in the incubation period, effective hatching and survival of embryos and neonates of the freshwater burrowing crab, Zilchiopsis collastinensis (Decapoda, Trichodactylidae). Both pesticides were prepared from commercial and technical grade products. The exposure to about 100, 200, and 400 ng endosulfan L^?1, and 48, 240, and 1,200 ng chlorpyrifos L^?1 did not cause differences in the incubation period or in effective hatching but decreased survival of neonates, especially in the concentrations prepared from the technical grade product. Even if these concentrations are below the median lethal concentration (LC₅₀) values for embryos, these caused a significant decrease in the survival of neonates, i.e. when crabs are outside the egg and not protected by chorion. The decrease in the neonate population caused by these concentrations, which could be found in the environment, might impact aquatic communities.     

Ions in motor vehicle exhaust and their dispersion near busy roads

Measurements in the exhaust plume of a petrol-driven motor car showed that molecular cluster ions of both signs were present in approximately equal amounts. The emission rate increased sharply with engine speed while the charge symmetry remained unchanged. Measurements at the kerbside of nine motorways and five city roads showed that the mean total cluster ion concentration near city roads (603 cm^?3) was about one-half of that near motorways (1211 cm^?3) and about twice as high as that in the urban background (269 cm^?3). Both positive and negative ion concentrations near a motorway showed a significant linear increase with traffic density (R² = 0.3 at p < 0.05) and correlated well with each other in real time (R² = 0.87 at p < 0.01). Heavy duty diesel vehicles comprised the main source of ions near busy roads. Measurements were conducted as a function of downwind distance from two motorways carrying around 120–150 vehicles per minute. Total traffic-related cluster ion concentrations decreased rapidly with distance, falling by one-half from the closest approach of 2 m to 5 m of the kerb. Measured concentrations decreased to background at about 15 m from the kerb when the wind speed was 1.3 m s^?1, this distance being greater at higher wind speed. The number and net charge concentrations of aerosol particles were also measured. Unlike particles that were carried downwind to distances of a few hundred metres, cluster ions emitted by motor vehicles were not present at more than a few tens of metres from the road.     

机动车细微颗粒物及气体污染物排放的隧道实测研究

利用隧道实验法对澳洲Vulturestreet公交专用隧道的细微颗粒物和气体污染物进行连续4d实测,分析了自然通风和纵向通风下隧道内NOX、细微颗粒物数目浓度以及细微颗粒物粒度分布特征。结果表明,隧道内细微颗粒物粒径谱呈双峰分布,峰值区段细微颗粒物粒径分别在19～25、70～105nm,判定为低硫柴油公交车和CNG公交车共同作用结果。隧道内NO2/NOX比值与NOX具有很强的相关性(R2=0.8320),当NOX大于1.000×10-6时,NO2/NOX渐进于(0.088±0.001),同时,NOX与细微颗粒物数目浓度、细微颗粒物总体积(VFP)呈明显的线性相关关系。柴油公交车和CNG公交车的混合条件下,细微颗粒物数目浓度、NOX平均排放因子分别为(2.48±1.53)×1014个/km、(12.8±5.1)g/km,柴油车和CNG公交车细微颗粒物数目浓度排放因子和NO排放因子没有明显差异。     

Particle emission factors during cooking activities

Exposure to particles emitted by cooking activities may be responsible for a variety of respiratory health effects. However, the relationship between these exposures and their subsequent effects on health cannot be evaluated without understanding the properties of the emitted aerosol or the main parameters that influence particle emissions during cooking. Whilst traffic-related emissions, stack emissions and concentrations of ultrafine particles (UFPs, diameter < 100 nm) in urban ambient air have been widely investigated for many years, indoor exposure to UFPs is a relatively new field and in order to evaluate indoor UFP emissions accurately, it is vital to improve scientific understanding of the main parameters that influence particle number, surface area and mass emissions. The main purpose of this study was to characterise the particle emissions produced during grilling and frying as a function of the food, source, cooking temperature and type of oil. Emission factors, along with particle number concentrations and size distributions were determined in the size range 0.006–20 μm using a Scanning Mobility Particle Sizer (SMPS) and an Aerodynamic Particle Sizer (APS). An infrared camera was used to measure the temperature field. Overall, increased emission factors were observed to be a function of increased cooking temperatures. Cooking fatty foods also produced higher particle emission factors than vegetables, mainly in terms of mass concentration, and particle emission factors also varied significantly according to the type of oil used.     

Distribution and temporal variation of trace metal enrichment in surface sediments of San Jorge Bay, Chile

Cu, Pb, and Hg concentrations were determined in surface sediment samples collected at three sites in San Jorge Bay, northern Chile. This study aims to evaluate differences in their spatial distribution and temporal variability. The highest metal concentrations were found at the site “Puerto”, where minerals (Cu and Pb) have been loaded for more than 60 years. On the other hand, Hg does not pose a contamination problem in this bay. Cu and Pb concentrations showed significant variations from 1 year to another. These variations seem to be a consequence of the combination of several factors, including changes in the loading and/or storage of minerals in San Jorge Bay, the dredging of bottom sediments (especially at Puerto), and seasonal changes in physical–chemical properties of the water column that modify the exchange of metals at the sediment–water interface. Differences in the contamination factor and geoaccumulation index suggest that pre-industrial concentrations measured in marine sediments of this geographical zone, were better than geological values (average shale, continental crust average) for evaluating the degree of contamination in this coastal system. Based on these last two indexes, San Jorge Bay has a serious problem of Cu and Pb pollution at the three sampling locations. However, only Cu exceeds the national maximum values used to evaluate ecological risk and the health of marine environments. It is suggested that Chilean environmental legislation for marine sediment quality—presently under technical discussion—is not an efficient tool for protecting the marine ecosystem.     

Temporal evolution of charged and neutral nanoparticle concentrations during atmospheric new particle formation events and its implications for ion-induced nucleation

Time series of nanoparticle number concentration during new particle formation (NPF) events in the urban environment of Brisbane, Australia, showed that the formation of charged particles often occurred before that of neutral particles. We monitored 241 days during the calendar year 2012 over which NPF events were observed on 108 days. We studied the times at which the charged and neutral particle concentrations in the size range 1.8–3.2 nm reached their peak values and found that they were clearly different in 50 events with the peak neutral particle concentration lagging behind the charged particle concentration during 42 of these events with a mean time lag of 24±12 min. While the charged particles were more likely to form before the neutral particles, once formed, the growth rate of the particles did not depend on their charge. While ion-induced nucleation is not the dominant mechanism of NPF in the atmosphere, our observations suggest that the presence of ions in the atmosphere plays a role that cannot be ignored.

Open image in new window

     

Metal contents in coastal waters of San Jorge Bay, Antofagasta, northern Chile: a base line for establishing seawater quality guidelines

We measured the concentration of 12 metals in coastal waters of seven sites of San Jorge Bay in Antofagasta (northern Chile), in order to relate the presence of metals with the different uses of San Jorge Bay coastal border, and to evaluate the quality of the bay's bodies of water according to the proposed current Chilean Quality Guide for trace elements in seawater (CONAMA 2003). The results suggest that the coastal water of San Jorge Bay has very good quality according to the proposed regulation mentioned above. However, the distribution of metals such as Cu and Pb along the bay's coast line evidences a notorious effect of the industrial activity, which would involve different behavior patterns for some trace elements in some bodies of water, suggesting that the levels indicated in the environmental guideline of the Chilean legislation do not represent pollution-free environments.     

The Cytotoxicity of Some Organic Solvents on Isolated Hepatocytes in Monolayer Culture

The cytotoxic effects of volatile and water-insoluble organic solvents (ethylbenzene, tetrachloroethylene, n-hexane) were tested on isolated hepatocytes in monolayer culture by using the 3-(4,5 dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide (MTT) reduction assay. All of the tested compounds inhibited metabolic activity of hepatocytes and this effect depended on the concentration of solvents in the incubatory medium. The presence of fetal calf serum in the medium did not change the cytotoxicity of xenobiotics. IC₅₀ values calculated on the basis of the MTT assay indicated that ethylbenzene was more cytotoxic than tetrachloroethylene and n-hexane. Using hepatocyte monolayer culture and the MTT assay to assess cytotoxicity of organic solvents causes many technical problems. It seems that it cannot be used as a rapid, cheap, and credible method.     

Long-distance GM pollen movement of creeping bentgrass using modeled wind trajectory analysis.

The importance of understanding the role of atmospheric conditions in pollen dispersal has grown in recent years with increased field-testing of genetically modified (GM) crop plants. An atmospheric model was used to characterize wind trajectories at 10 m and 100 m above GM pollen source fields located within a 4452-ha "control" area north of Madras, Oregon, USA, designated by the Oregon Department of Agriculture (ODA). The area was used in 2003 for the growth of GM creeping bentgrass (Agrostis stolonifera) engineered to be resistant to glyphosate herbicide. The presence of the GM gene (CP4 EPSPS) provided a distinct selectable marker for pollen-mediated gene flow to sentinel and resident Agrostis spp. plants. Linkage of GM gene presence with wind flow characteristics over the "control" area became essential to understand the timing and processes leading to long-distance transport of this pollen. Wind trajectories showed a general pattern of northwest to southeast air movement. Trajectory travel distances calculated hourly from 06:00 hours to 15:00 hours during the 2003 pollination period (15 June-15 July) showed movement up to 15 km from the "control" area's center by the first hour. Maximum travel distances increased to 40 and 55 km after two and three hours from release, respectively. Calculated wind trajectory positions corresponded with observed long-distance pollen-mediated gene flow in the seedlings of sentinel and resident plants. The highest correlations were found during the late morning hours. Back-calculated wind trajectories from sentinel and resident locations with GM-gene-positive progeny suggested that most successful fertilizations occurred in the direction of prevailing winds during late June 2003. The occurrence of positive progeny from sentinel plants, upwind of the "control" area during this period, indicated the additional influence of local topography on pollen dispersal.