New catalyst comprising Silicotungstic acid and MCM-22 for degradation of some organic dyes

A heterogeneous catalyst comprising Keggin type polyoxometalate, silicotungstic acid (SiW₁₂), and MCM-22 was synthesized using wet impregnation method and characterized by acidity measurement, BET, FT-IR, XRD, and SEM. Their catalytic activity was evaluated for the degradation of cationic organic dyes like methylene blue (MB), crystal violet (CV), and an azo dye Chryosidine Y (CY) in an aqueous solution. The experimental parameters such as catalyst amount, initial dye concentration, and contact time were studied for the degradation of dyes, and it was found that the cationic dyes like methylene blue and crystal violet show better activity as compared to azo dye Chryosidine Y. This may be attributed to better electrostatic interaction of these cationic dyes with the residual negative surface charge of the catalyst, due to presence of SiW₁₂ ion as it is rich in surface oxygens and surface hydroxyl groups. The control experimental results showed that the presence of SiW₁₂ at the surface of MCM-22 promoted the degradation reactions, and presence of multiple W–O bonds in polyoxometalate also played a key role in this reaction. The catalyst exhibits recycling ability without any significant loss in activity up to four cycles.

     

Berberine-loaded liquid crystalline nanoparticles inhibit non-small cell lung cancer proliferation and migration in vitro

Environmental Science and Pollution Research - Non-small cell lung cancer (NSCLC) is reported to have a high incidence rate and is one of the most prevalent types of cancer contributing towards 85%...     

A New Mathematical Model of Air Pollution Concentration

Abstract

Submicron particles play a major role in soiling processes and contribute to corrosion, current leakage and shorts in electronic equipment. For more than a year, optical particle counters have been used to continuously measure the concentrations of submicron particles at a telecommunications facility in Southern California. Separate instruments have simultaneously sampled at four locations: the outdoor air intake, immediately upstream of the HVAC filters, immediately downstream of the HVAC filters, and inside the office. The indoor concentrations can be explained in the context of a one-compartment mass balance model. Key parameters in the model (e.g., the air exchange rate) were monitored throughout the sampling period. In the latter part of this study, the particle counters were used as feedback elements in the HVAC system. An estimate of the concentration of indoor submicron particles, based on measurements of outdoor submicron particles, has been used as a control variable. When this variable exceeds a preset value, the outdoor air damper is partially closed, reducing the amount of outdoor air entering the building. That is, the position of the damper is based on the concentration of outdoor particles as well as the outdoor temperature. As a consequence, the average indoor concentration of submicron particles has been significantly reduced within this facility.     

Spatial and temporal variations in traffic-related particulate matter at New York City high schools

Relatively little is known about exposures to traffic-related particulate matter at schools located in dense urban areas. The purpose of this study was to examine the influences of diesel traffic proximity and intensity on ambient concentrations of fine particulate matter (PM_2.5) and black carbon (BC), an indicator of diesel exhaust particles, at New York City (NYC) high schools. Outdoor PM_2.5 and BC were monitored continuously for 4–6 weeks at each of 3 NYC schools and 1 suburban school located 40 km upwind of the city. Traffic count data were obtained using an automated traffic counter or video camera. BC concentrations were 2–3 fold higher at urban schools compared with the suburban school, and among the 3 urban schools, BC concentrations were higher at schools located adjacent to highways. PM_2.5 concentrations were significantly higher at urban schools than at the suburban school, but concentrations did not vary significantly among urban schools. Both hourly average counts of trucks and buses and meteorological factors such as wind direction, wind speed, and humidity were significantly associated with hourly average ambient BC and PM_2.5 concentrations in multivariate regression models. An increase of 443 trucks/buses per hour was associated with a 0.62 μg/m³ increase in hourly average BC at an NYC school located adjacent to a major interstate highway. Car traffic counts were not associated with BC. The results suggest that local diesel vehicle traffic may be important sources of airborne fine particles in dense urban areas and consequently may contribute to local variations in PM_2.5 concentrations. In urban areas with higher levels of diesel traffic, local, neighborhood-scale monitoring of pollutants such as BC, which compared to PM_2.5, is a more specific indicator of diesel exhaust particles, may more accurately represent population exposures.     

Simulation of Nitrogen Transport in Soil Under Municipal Wastewater Application Using LEACHN1

Abstract: To reduce the risk of surface and ground water pollution from nitrate, and in so doing improve the quality of receiving waters, better management options for land application of wastewater must be explored. In order to determine proper and environmentally safe wastewater land application methods, different application scenarios were simulated in this study to determine the fate and transport of nitrogen in sand‐filled field lysimeters. The Leaching Estimation and CHemistry Model for Nutrients (LEACHN) model was used to assess alternative wastewater land application scenarios: applications of low‐, medium‐, or high‐N concentration wastewaters, at different rates (0.06, 0.19, 0.31, or 0.6 m³/m²/day), under continuous or intermittent application. In the simulations, the NO₃^?‐N levels decreased in the leachate with an increase in wastewater application rates, due to enhanced denitrification in the upper anoxic zone of the soil generated under high flow rates. With low‐N concentrated wastewater, under all tested flow rates, the NO₃^?‐N levels in the leachate were below the permissible limit. When medium‐N wastewater was applied, the NO₃^?‐N level in leachate from the highest flow rate was below the permissible limit. Therefore, wastewater with low‐N concentrations, about 10 and 0.5 mg/l NO₃^?‐N and NH₄⁺‐N, may be continuously applied to soil at all tested flow rates, with minimal nitrate pollution problems. Medium and high‐N concentrated wastewaters increased nitrate levels in the leachate, as compared to their levels in the low‐N concentrated wastewater. It appears that while low‐N wastewater can be safely applied to land without much nitrate leaching problems, the application of medium and high‐N wastewater could pose nitrate pollution problems. The simulation with intermittent application of low‐, medium‐, and high‐N concentrated wastewater at different rates showed a 51‐89% greater reduction in NO₃^?‐N levels in the leachate, than for continuous application under all tested wastewater N‐levels and flow rates. Also, the levels of NO₃^?‐N in their leachates were below the permissible limit. Therefore, wastewater with high levels of nitrogenous compounds (up to 54 NO₃‐N mg/l) could be treated through an intermittent application to land.     

Environmental photooxidation of dibenzothiophenes following the Amoco Cadiz oil spill

Photooxidation products of dibenzothiophenes (sulfur containing petroleum heteroaromatic hydrocarbons) were characterized in an oil slick sample obtained from a field location following the AMOCO CADIZ oil spill. The same oxidation products were formed in the laboratory by the photooxidation of a medium Arabian crude oil which contained the identical precursor hydrocarbons. Analytical techniques included fractionation by liquid/solid chromatography and characterization using high resolution gas chromatography-mass spectrometry. To the best of the author's knowledge, this represents the first reported instance for the formation of photooxidation products following an actual oil spill. A comparison of the quantities of various oxidation products was carried out by quantitative mass spectrometry using extracted ion current profiles of dibenzothiophenes and their corresponding sulfoxides. The geochemical and physiological implications of such photooxidation processes are also discussed.     

Removal of arsenic from groundwater by granular titanium dioxide adsorbent

A novel granular titanium dioxide (TiO2) was evaluated for the removal of arsenic from groundwater. Laboratory experiments were carried out to investigate the adsorption capacity of the adsorbent and the effect of anions on arsenic removal. Batch experimental results showed that more arsenate [As(V)] was adsorbed on TiO2 than arsenite [As(III)] in US groundwater at pH 7.0. The adsorption capacities for As(V) and As(III) were 41.4 and 32.4 mgg(-1) TiO2, respectively. However, the adsorbent had a similar adsorption capacity for As(V) and As(III) (approximately 40 mgg(-1)) when simulated Bangladesh groundwater was used. Silica (20 mgl(-1)) and phosphate (5.8 mgl(-1)) had no obvious effect on the removal of As(V) and As(III) by TiO2 at neutral pH. Point-of-entry (POE) filters containing 3 l of the granular adsorbent were tested for the removal of arsenic from groundwater in central New Jersey, USA. Groundwater was continuously passed through the filters at an empty bed contact time (EBCT) of 3 min. Approximately 45,000 bed volumes of groundwater containing an average of 39 microgl(-1) of As(V) was treated by the POE filter before the effluent arsenic concentration increased to 10 microgl(-1). The total treated water volumes per weight of adsorbent were about 60,000 l per 1 kg of adsorbent. The field filtration results demonstrated that the granular TiO2 adsorbent was very effective for the removal of arsenic in groundwater.     

Involvement of adrenal and thyroid activity in the annual testicular regression of red headed bunting (Emberiza bruniceps)

Thyroid and adrenal activities are closely associated with reproductive cycle and any alteration in these endocrine functions may cause changes in the pituitary-gonadal axis. To understand this interrelationship during testicular senstive phase (month of April) male birds were injected with metapyrone(corticosterone synthesis blocks 1 microg/bird/day & 10 microg/bird/day) and newmercazol (thyroxine synthesis blocks 10 microg/bird/day) over a period of 12 weeks. During late breeding phase (month of August) two sets of birds having large gonad (photosensitive) and regressed gonad (photorefractory) were injected with metapyrone (10 microg/bird/alternate day). Results indicate that decreased activity of both adrenal and thyroid, extended the breeding phase but rate of regression decreased only in the case of bird receiving higher level of metapyrone.However,in the second group rate of gonadal regression was slow only in those bird where treatment was started during photosensitive phase. It may be suggested that optimum level of activity of adrenal and thyroid function are essential for termination of reproduction and any alteration in these function may alter seasonal pattern of neuroendocrine gonadal axis.