Understanding Urban Vehicular Pollution Problem Vis-a-Vis Ambient Air Quality – Case Study of a Megacity (Delhi, India)

Air pollution has become a growing problem in megacities and large urban areas through out the globe, and transportation is recognized as the major source of air pollution in many cities, especially in developing countries. Contribution of automobiles is reported in the range of 40 to 80% of the total air pollution. The challenge facing megacities is how to reduce the adverse environmental impacts and other negative effects of transportation without giving up the benefits of mobility. The dilemma becomes most pressing under conditions of rapid urban growth, which is likely to increase travel demand significantly.The paper is aimed at understanding the problem of vehicular pollution vis-a-vis ambient air quality for a highly traffic affected megacity, Delhi, wherein, the contribution of transport sector was estimated to be as high as 72%. An effort has been made to review and evaluate the benefits (in terms of improved air quality) of the technological interventions/policies adopted for vehicular pollution control in Delhi. It also highlights the outcome of the efforts and suggests further improvements thereon. The importance of public participation and awareness are also discussed. The paper focuses on deriving the benefits of the implementation of management strategies, supported by scientific and technical data/interpretation, so that the people can realize and participate in the government's endeavor for clean city drive in a more effective manner.     

Pollution risk assessment based on QUAL2E-UNCAS simulations of a tropical river in Northern India

This paper exemplifies the application of U.S. Environmental Protection Agency's water quality model, QUAL2E-UNCAS in assessing the pollution risk of a tropical river. The rivers selected for study were Hindon (main river) and Kali (its tributary) flowing through Uttar Pradesh district of Northern India. The model application to the two rivers revealed poor water quality in terms of dissolved oxygen (DO), biochemical oxygen demand (BOD), and ammonia concentrations. Monte Carlo simulations were performed on two different data sets that were confirming to marked seasonal variations. The Monte Carlo simulation (MCS) derived 95 % confidence level for these parameters strengthened the fact that all point sources were exploiting the assimilative capacity of the two rivers. In order to ascertain probabilistically the risk at which two rivers were falling short of desired water quality, probability curves based on effluent standards and available water quality were prepared. On mapping the two curves, it was found that at 95 % probability, Hindon River was flowing with 53 to 100 % less of desired DO, up to 100 % more of minimum BOD, and probability with which ammonia concentration would not be more than the desired concentration was found to fall downstream. The Kali headwaters showed better quality during low river temperature but worsened downstream with up to 100 % violation in all the above observed parameters. It is expected that similar studies wherein the dependable levels with which a polluted river can be understood to fall short of desired water quality can prove to be useful in ascertaining the efficacy of effluent standards and/or follow-up of pollution control measures.     

Design of fuzzy synthetic evaluation model for air quality assessment

Little attention was paid to growing air quality concerns until about a decade earlier in India. Indian Government started continuous monitoring of the urban air quality in Taj corridor area to protect the heritage monuments like Agra Fort, Fatehpur Sikri, the bird sanctuary at Bharatpur National Park and also the human health associated with air pollution. The aim of this study was to address air quality assessment using fuzzy synthetic evaluation model. The model was designed for four air pollutants (sulphur dioxide, nitrogen dioxide, suspended particulate matters and respirable suspended particulate matter). In the present paper, an approach is demonstrated for the determination of fuzzy air quality index by aggregating the four pollutants. The model also considers the weights of individual pollutants during aggregation. The weights of individual pollutants were determined using analytical hierarchical process. The model was applied for air quality assessment in four monitoring stations situated in Taj Trapezium Zone.     

A Classification System for Characterization of Physical and Non-Physical Work Factors

A comprehensive evaluation of work-related perfomance factors is a prerequisite to developing integrated and long-term solutions to workplace performance improvement. This paper describes a work-factor classification system that categorizes the entire domain of workplace factors impacting performance. A questionnaire-based instrument was developed to implement this classification system in industry. Fifty jobs were evaluated in 4 different service and manufacturing companies using the proposed questionnaire-based instrument. The reliability coefficients obtained from the analyzed jobs were considered good (.589 to .862). In general, the physical work factors resulted in higher reliability coefficients (.847 to .862) than non-physical work factors (.589 to .768). performance work-factor system classification     

Antibacterial activity of soil-bound antibiotics

There is some concern that antibiotic residues in land-applied manure may promote the emergence of antibiotic resistant bacteria in the environment. The goal of this study was to determine whether or not soil bound antibiotics are still active against bacteria. The procedure involved sorbing various amounts of tetracycline or tylosin on two different textured soils (Webster clay loam [fine-loamy, mixed, superactive, mesic Typic Endoaquolls] and Hubbard loamy sand [sandy, mixed, frigid Entic Hapludolls]), incubating these soils with three different bacterial cultures (an antibiotic resistant strain of Salmonella sp. [Salmonella(R)], an antibiotic sensitive strain of Salmonella sp. [Salmonella(S)], and Escherichia coli ATCC 25922), and then enumerating the number of colony forming units relative to the control. Incubation was done under both static and dynamic conditions. Soil-adsorbed antibiotics were found to retain their antimicrobial properties since both antibiotics inhibited the growth of all three bacterial species. Averaged over all other factors, soil adsorbed antimicrobial activity was higher for Hubbard loamy sand than Webster clay loam, most likely due to higher affinity (higher clay content) of the Webster soil for antibiotics. Similarly, there was a greater decline in bacterial growth with tetracycline than tylsoin, likely due to greater amounts of soil-adsorbed tetracycline and also due to lower minimum inhibitory concentration of most bacteria for tetracycline than tylosin. The antimicrobial effect of tetracycline was also greater under dynamic than static growth conditions, possibly because agitation under dynamic growth conditions helped increase tetracycline desorption and/or increase contact between soil adsorbed tetracycline and bacteria. We conclude that even though antibiotics are tightly adsorbed by clay particles, they are still biologically active and may influence the selection of antibiotic resistant bacteria in the terrestrial environment.     

Solidification and stabilization of hazardous wastes using geopolymers as sustainable binders

Journal of Material Cycles and Waste Management - Solidification/stabilization (S/S) of hazardous waste using cement for immobilization of contaminants has been recognized as Best Demonstrated...     

Common property resources in drylands of India

Common property resources are areas of land or water being used by a community or a group of communities. These have special significance to peoples and communities who depend on them for their livelihood. The commons in all arid districts of India include village pastures, community forests, wasteland, common threshing grounds, waste dumps, watershed drainage, village baoris¹, talabs², nadis³ and ponds, and tanks, rivers, rivulets, wetlands, riverbeds, community conserved areas, protected areas, Dhaam⁴ or Dhooni⁵, culturable wastelands, barren & un-culturable land, etc. The area under commons often ranged from 9 to 28% of total village area. Appropriation of the commons by the state for building essential infrastructure such as schools, clinics, veterinary hospitals, housing for government functionaries, SEZ and industrial corridors, etc. is a cause of serious concern. Presently the ownership rights over CPRs are not clear and there are many who claim ownership, some at State level but also like local bodies. The 12^th plan of the Planning Commission of India recognized and highlighted the need for favourable land tenure arrangements, institutional design and programme architecture in order to achieve effective governance and management of the commons. The revitalization of CPRs is crucial for protecting livelihoods, as well as for biodiversity conservation and for the improvement in arid microclimatic conditions. Dialogue continues on the status of common property resources, the available legal framework and some policy related issues for its conservation through strengthening of local institutions and capacity building for stakeholders.     

Decadal emission estimates of carbon dioxide,sulfur dioxide,and nitric oxide emissions from coal burning in electric power generation plants in India

This study aims to estimate the emissions of carbon dioxide (CO₂), sulfur dioxide (SO₂), and nitric oxide (NO) for coal combustion in thermal power plants in India using plant-specific emission factors during the period of 2001/02 to 2009/10. The mass emission factors have been theoretically calculated using the basic principles of combustion under representative prevailing operating conditions in the plants and fuel composition. The results show that from 2001/02 to 2009/10 period, total CO₂ emissions have increased from 324 to 499 Mt/year; SO₂ emissions have increased from 2,519 to 3,840 kt/year; and NO emissions have increased from 948 to 1,539 kt/year from the Indian coal-fired power plants. National average emissions per unit of electricity from the power plants do not show a noticeable improvement during this period. Emission efficiencies for new plants that use improved technology are found to be better than those of old plants. As per these estimates, the national average of CO₂ emissions per unit of electricity varies between 0.91 and 0.95 kg/kWh while SO₂ and NO emissions vary in the range of 6.9 to 7.3 and 2.8 to 2.9 g/kWh, respectively. Yamunagar plant in Haryana state showed the highest emission efficiencies with CO₂ emissions as 0.58 kg/kWh, SO₂ emissions as 3.87 g/kWh, and NO emissions as 1.78 g/kWh, while the Faridabad plant has the lowest emission efficiencies with CO₂ emissions as 1.5 kg/kWh, SO₂ emissions as 10.56 g/kWh, and NO emissions as 4.85 g/kWh. Emission values at other plants vary between the values of these two plants.     

Correlation of edge truncation with antibacterial activity of plate-like anisotropic silver nanoparticles

Environmental Science and Pollution Research - The effect of silver nanoparticle anisotropy on the antibacterial properties has been studied against Escherichia coli, Staphylococcus aureus,...     

Survival of Porcine Reproductive and Respiratory Syndrome Virus in Pork Products

There is a risk of virus transmission through contaminated pork, and many viruses are considered potential hazards for both humans and livestock. The risk of transmission may be elevated with importation/exportation of meat between countries globally. Survival of porcine reproductive and respiratory syndrome virus (PRRSV) in different pork products has not been studied. The present study evaluated PRRSV survival in four different products: fresh sausage, ham, bacon, and acidified sausage prepared with experimentally contaminated pork. These products were prepared according to standard methods used by the manufacturers of pork products, and then stored at room temperature, 4 °C and ?20 °C. PRRSV was detected only in fresh sausage for up to 15 days at 4 °C and for 30 days at ?20 °C. No PRRSV was detected at any temperature in any of the other three products. These preliminary data provide valuable information for the pork processing industry, as well as in planning for import/export of these products among different countries.