Transient design of landfill liquid addition systems

This study presents the development of design charts that can be used to estimate lateral and vertical spacing of liquids addition devices (e.g., vertical well, horizontal trenches) and the operating duration needed for transient operating conditions (conditions until steady-state operating conditions are achieved). These design charts should be used in conjunction with steady-state design charts published earlier by Jain et al., 2010a, Jain et al., 2010b. The data suggest that the liquids addition system operating time can be significantly reduced by utilizing moderately closer spacing between liquids addition devices than the spacing needed for steady-state conditions. These design charts can be used by designers to readily estimate achievable flow rate and lateral and vertical extents of the zone of impact from liquid addition devices, and analyze the sensitivity of various input variables (e.g., hydraulic conductivity, anisotropy, well radius, screen length) to the design. The applicability of the design charts, which are developed based on simulations of a continuously operated system, was also evaluated for the design of a system that would be operated intermittently (e.g., systems only operated during facility operating hours). The design charts somewhat underestimates the flow rate achieved and overestimates the lateral extent of the zone of impact over an operating duration for an intermittently operated system. The associated estimation errors would be smaller than the margin of errors associated with measurement of other key design inputs such as waste properties (e.g., hydraulic conductivity) and wider variation of these properties at a given site due to heterogeneous nature of waste.     

Concentrations of selected metals in blood,serum, and urine among US adult exclusive users of cigarettes,cigars, and electronic cigarettes

Data from National Health and Nutrition Examination Survey for 2013–2014 were used to compare observed levels of selected metals in blood, serum, and urine among US adults aged ≥20 years for exclusive cigar, cigarettes, and e-cigarette users. Adjusted geometric means for e-cigarette users were found to be higher than for cigar users for blood manganese (10.3 vs. 7.9 µg/L, p = 0.02). Cigar users were found to have lower adjusted geometric means than cigarette users for urine cobalt (0.22 vs. 0.4 µg/L, p = 0.04) and urine antimony (0.03 vs. 0.06 µg/L, p = 0.03). Adjusted levels of blood selenium, serum copper, selenium, and zinc, and urine arsenic, barium, molybdenum, tin, strontium, thallium, tungsten, and uranium were found to be comparable among cigarettes only, cigar only, and electronic cigarettes only users. However, irrespective of the comparative levels of these metals among cigar, cigarette, and e-cigarette users, focus must be to assess the short- and long-term health effects of the exposure to these metals particularly nanoparticles via inhalation from e-cigarette aerosols.     

“NEW” resource recovery from wastewater using bioelectrochemical systems: Moving forward with functions

Bioelectrochemical systems (BES) have been extensively studied for resource recovery from wastewater. By taking advantage of interactions between microorganisms and electrodes, BES can accomplish wastewater treatment while simultaneously recovering various resources including nutrients, energy and water (“NEW”). Despite much progress in laboratory studies, BES have not been advanced to practical applications. This paper aims to provide some subjective opinions and a concise discussion of several key challenges in BES-based resource recovery and help identify the potential application niches that may guide further technological development. In addition to further increasing recovery efficiency, it is also important to have more focus on the applications of the recovered resources such as how to use the harvested electricity and gaseous energy and how to separate the recovered nutrients in an energy-efficient way. A change in mindset for energy performance of BES is necessary to understand overall energy production and consumption. Scaling up BES can go through laboratory scale, transitional scale, and then pilot scale. Using functions as driving forces for BES research and development will better guide the investment of efforts.

Open image in new window

     

Effect of hypoxia on the circulating levels of essential mineral elements in rats

Changes occurring in concentrations of certain trace metals and electrolytes viz. chromium, copper, zinc, sodium, potassium, calcium, magenesium and chloride in plasma of rats exposed to intermittent hypobaric hypoxia were evaluated. Batches of Sprague-Dowley rats (12 in each group) were exposed for 1, 7,14 and 21 days to a simulated altitude 7,620 m for 6 h per day and one group of unexposed animals was kept as control. There was a significant rise of 153% in plasma chromium levels of 1 day exposed group in comparison to the unexposed group which tends to normalise on subsequent exposure. There was a gradual increase in plasma copper levels of 9.0, 28.2, 62.6 and 65.6% respectively in 1,7,14 and 21 days exposed rats in comparison to unexposed rats. On the other hand plasma zinc levels were seen to be decreasing during entire exposure. Plasma sodium levels decreased initially in 1 and 7 day exposed rats and increased in later groups whereas plasma potassium levels of exposed groups remained low in comparison to unexposed group. Chloride levels were found to be elevated in 14 and 21 day exposed groups. The plasma calcium and magnesium levels were higher in all exposed groups over unexposed groups. Changes in chromium, copper and zinc observed in the present study during exposure to hypoxic stress may be responsible for the hyperglycemia and anorexia encountered during intial phase of high altitude acclimatisation.     

Heavy metal content in soil reclaimed from a municipal solid waste landfill

Residues reclaimed from a municipal solid waste (MSW) landfill were characterized for the concentrations of a number of heavy metals. The residue fractions analyzed included a fine fraction (<0.425 mm), an intermediate fraction (>0.425 and <6.3 mm) and a fraction consisting of paper products that could ultimately degrade to a smaller size. The intermediate fraction appeared to be organic in nature, while the fine fraction was more soil-like. In general, the metal concentrations were greatest in the intermediate fraction and lowest in the fine fraction. The effect of sample age on the elemental content was also investigated. The concentrations of several elements were greater in older samples (sample approximately 8 years in age) when compared to newer samples (sample approximately 3 years in age). Limitations associated with the land application of residual soil (composed of the fine and intermediate fractions) were assessed by comparing measured concentrations to regulatory threshold values. In general, most metal concentrations were below regulatory thresholds for use in unrestricted settings. At the concentrations measured, however, several elements might limit reuse options, depending on which regulatory threshold serves as a benchmark. Elevated concentrations of arsenic presented the greatest limitation with respect to common US thresholds while elevated cadmium concentrations presented the greatest limitation when compared to UK thresholds. The source of the arsenic was determined to be the waste, not the cover soil.     

Mitigating nitrous oxide and methane emissions from soil in rice-wheat system of the Indo-Gangetic plain with nitrification and urease inhibitors

Mitigation of methane (CH4) and nitrous oxide (N2O) emissions from soil is important to reduce the global warming. Efficacy of five nitrification inhibitors, i.e. neem (Azadirachta melia) cake, thiosulphate, coated calcium carbide, neem oil coated urea and dicyandiamide (DCD) and one urease inhibitor, hydroquinone, in mitigating N2O and CH4 emissions from fertilized soil was tested in rice-wheat system in the Indo-Gangetic plains. The closed chamber technique was used for the collection of gas samples, which were analyzed using gas chromatography. Reduction in N2O emission on the application of nitrification/urease inhibitors along with urea ranged from 5% with hydroquinone to 31% with thiosulphate in rice and 7% with hydroquinone to 29% with DCD in wheat crop. The inhibitors also influenced the emission of CH4. While application of neem coated urea, coated calcium carbide, neem oil and DCD reduced the emission of CH4; hydroquinone and thiosulphate increased the emission when compared to urea alone. However, the global warming potential was lower with the inhibitors (except hydroquinone) as compared to urea alone, suggesting that these substances could be used for mitigating greenhouse gas emission from the rice-wheat systems.     

Methane and nitrous oxide emissions from an irrigated rice of North India

Upland rice was grown in the kharif season (June-September) under irrigated condition in New Delhi, India (28 degree 40'N and 77 degree 12'E) to monitor CH4 and N2O emission, as influenced by fertilizer urea, ammonium sulphate and potassium nitrate alone (at 120 kg ha-1) and mixed with dicyandiamide (DCD), added at 10% of applied N. The experimental soil was a typic ustochrept (Inceptisol), clay loam, in which rice (Oryza sativa L., var. Pusa-169, duration: 120-125 days) was grown and CH4 and N2O was monitored for 105 days by closed chamber method, starting from the 5 days and 1 day after transplanting, respectively. Methane fluxes had a considerable temporal variation (CV=52-77%) and ranged from 0.05 (ammonium sulphate) to 3.77 mg m-2 h-1 (urea). There was a significant increase in the CH4 emission on the application of fertilizers while addition of DCD with fertilizers reduced emissions. Total CH4 emission (105 days) ranged from 24.5 to 37.2 kg ha-1. Nitrous oxide fluxes were much lower than CH4 fluxes and had ranged from 0.18 to 100.5 g m-2 h-1 with very high temporal variation (CV=69-143%). Total seasonal N2O emission from different treatments ranged from 0.037 to 0.186 kg ha-1 which was a N loss of 0.10-0.12% of applied N. All the fertilizers significantly increased seasonal N2O emission while application of DCD reduced N2O emissions significantly in the range of 10-53%.     

Emission of nitrous oxide from rice-wheat systems of Indo-Gangetic plains of India

Nitrous oxide (N₂O) accounts for 5%of the total enhanced greenhouse effect and responsiblefor the destruction of the stratospheric ozone. The rice-wheat cropping system occupying 26 million ha ofproductive land in Asia could be a major source ofN₂O as most of the fertilizer N in this region isconsumed by this system. Emission of N₂O asinfluenced by application of urea, urea plus farm yardmanure (FYM), and urea plus dicyandiamide (DCD), anitrification inhibitor, was studied in rice-wheatsystems of Indo-Gangetic plains of India. Total emissionof N₂O-N from the rice-wheat systems varied between654 g ha^-1 in unfertilized plots and 1570 g ha^-1 in urea fertilized plots. Application of FYM and DCDreduced emission of N₂O-N in rice. The magnitude ofreduction was higher with DCD. In wheat also N₂O-Nemission was reduced by DCD. FYM applied in rice had noresidual effect on N₂O-N emission in wheat. In riceintermittent wetting and drying condition of soilresulted in higher N₂O-N emission than that ofsaturated soil condition. Treatments with 5 irrigationsgave higher emissions in wheat than those with 3irrigations. In rice-wheat system, typical of a farmer'sfield in Indo-Gangetic plains, where 240 kg N isgenerally applied through urea, N₂O-N emission is1570 g ha^-1 (0.38% of applied N) and application ofFYM and DCD reduced it to 1415 and 1096 g ha^-1,respectively.     

Aircraft-Induced Noise Levels in Some Residential Areas of Delhi

The measurements of aircraft-induced noise levels in some residential areas in the capital city of India were carried out in the month of April and May, 1996. Four areas were chosen which were located underneath the flight path. It has been found that average increase in noise levels over and above the background levels is more than 20 dBA except in case of the most distant site where it is 11 dBA. A good correlation has been found between average peak noise levels (dBA) and the population response in terms of annoyance.