Food contamination control in European new Member States and associated candidate countries: Data collected within the SAFEFOODNET project

This paper reports the results obtained from the data collected within the European Commission funded project SAFEFOODNET regarding the state of the art in the control of chemical food contaminants in twelve European New Member States and one Associated Candidate Country (Turkey). Information has been gathered on institutions involved in food chemical contamination control, types of contaminants and matrices analyzed, procedures for data quality assurance, purposes of the analyses and accessibility of data in the participant countries. The resulting picture points out the general availability of adequate capabilities for the analysis of food contaminants in the laboratories in charge of control and the performance of the analysis of a large variety of chemicals (persistent organic pollutants, polycyclic aromatic hydrocarbons, pesticides, mycotoxins, heavy metals, radionuclides) in almost each country with few exceptions (dioxins in Bulgaria, Turkey, Latvia, persistent organic pollutants in Lithuania and Malta, polycyclic aromatic hydrocarbons in Malta). The application of validated analytical methods and the process of laboratory accreditation are partially fulfilled within the investigated countries, but still forthcoming for some countries, as in Romania, Turkey and Malta. Information collected on food controls is only partially available online and the language used is prevalently local and English to a lesser extent.     

Identification of heavy metal sources by multivariable analysis in a typical Mediterranean city (SE Spain)

Problems associated with heavy metal characterization in the majority of sites are often due to multiple sources of pollution. This work presents the results through the use of advanced statistical techniques to identify sources of soil heavy metals in a typical Mediterranean city. The multivariable analysis performed on seven metals identified four sources controlling their variability. Cr, Mn, and Ni contents were associated to soil parent materials; Cd and Pb contents were related to anthropogenic activities, specifically industrial activities and traffic; Cu content is controlled by long-term application of inorganic fertilizers in agricultural areas. Finally, zinc concentration is associated to commercial and outdoor activities in the area. These results were supported by the fact that metals associated to parent material (Cr, Mn, and Ni) were better correlated with soil lithogenic properties, while anthropogenic metals were correlated with more variable soil constituents.     

Characterization of post-consumer polyolefin wastes by hyperspectral imaging for quality control in recycling processes

In this paper new analytical inspection strategies, based on hyperspectral imaging (HSI) in the VIS–NIR and NIR wavelength ranges (400–1000 and 1000–1700 nm, respectively), have been investigated and set up in order to define quality control logics that could be applied at industrial plant level for polyolefins recycling. The research was developed inside the European FP7 Project W2Plastics “Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste”. The main aim of the project is the separation of pure polyethylene and polypropylene adopting an innovative process, the magnetic density separation (MDS). Spectra of plastic particles and contaminants resulting from post-consumer complex wastes and of virgin polyolefins have been acquired by HSI and by Raman spectroscopy. The classification results obtained applying principal component analysis (PCA) on HSI data have been compared with those obtained by Raman spectroscopy, in order to validate the proposed innovative methodology. Results showed that HSI sensing techniques allow to identify both polyolefins and contaminants. Results also demonstrated that HSI has a great potentiality as a tool for quality control of feed (identification of contaminants in the plastic waste) and of the two different pure polypropylene and polyethylene flow streams resulting from the MDS-based recycling process.     

Environmental study of two significant solid samples: gravitation dust sediment and soil

In this work are presented results of the complex study of two significant solid environmental samples: gravitation dust sediments (industrial pollutants, potential source of risk elements input to soils) and soils (component of the environment, potential source of risk elements input to food web). The first phase of this study was focused on the study of the significant chemical properties (phase composition, content of organic and inorganic carbon) of the dust and soil samples. In the second phase, the fractionation analysis was used on the evaluation of the mobility of chosen risk elements (Cu, Ni, Pb, Zn) in the studied samples. The single-step extractions were applied in the order of the isolation of the element forms (fractions), with different mobilities during defined ecological conditions by utilization of the following reagents: 1 mol dm^− 3 NH₄NO₃ for isolation of the “mobile” fraction, 0.05 mol dm^− 3 ethylenediaminetetraacetic acid and 0.43 mol dm^− 3 CH₃COOH for isolation of the “mobilizable” fraction, and 2 mol dm^− 3 HNO₃ for isolation of all releasable forms. On the basis of the results obtained in this study, it is possible to state that different origins and positions of solid environmental samples in the environment reflect in different chemical properties of their matrix. The different properties of the sample matrix result in different mobilities of risk elements in these kinds of samples. The fractionation analysis with single-step extraction for isolation element fractions is the method most suitable for easy checking of environmental pollution and for evaluation of risk elements cycle in the environment.     

Selenium speciation in acidic environmental samples: application to acid rain-soil interaction at Mount Etna volcano

Speciation plays a crucial role in elemental mobility. However, trace level selenium (Se) speciation analyses in aqueous samples from acidic environments are hampered due to adsorption of the analytes (i.e. selenate, selenite) on precipitates. Such solid phases can form during pH adaptation up till now necessary for chromatographic separation. Thermodynamic calculations in this study predicted that a pH < 4 is needed to prevent precipitation of Al and Fe phases. Therefore, a speciation method with a low pH eluent that matches the natural sample pH of acid rain-soil interaction samples from Etna volcano was developed. With a mobile phase containing 20 mM ammonium citrate at pH 3, selenate and selenite could be separated in different acidic media (spiked water, rain, soil leachates) in <10 min with a LOQ of 0.2 μg L⁻¹ using ⁷⁸Se for detection. Applying this speciation analysis to study acid rain-soil interaction using synthetic rain based on H₂SO₄ and soil samples collected at the flanks of Etna volcano demonstrated the dominance of selenate over selenite in leachates from samples collected close to the volcanic craters. This suggests that competitive behavior with sulfate present in acid rain might be a key factor in Se mobilization. The developed speciation method can significantly contribute to understand Se cycling in acidic, Al/Fe rich environments.     

AMEG: the new SETAC advisory group on aquatic macrophyte ecotoxicology

Introduction and background

Primary producers play critical structural and functional roles in aquatic ecosystems; therefore, it is imperative that the potential risks of toxicants to aquatic plants are adequately assessed in the risk assessment of chemicals. The standard required macrophyte test species is the floating (non-sediment-rooted) duckweed Lemna spp. This macrophyte species might not be representative of all floating, rooted, emergent, and submerged macrophyte species because of differences in the duration and mode of exposure; sensitivity to the specific toxic mode of action of the chemical; and species-specific traits (e.g., duckweed's very short generation time).

Discussion and perspectives

These topics were addressed during the workshop entitled “Aquatic Macrophyte Risk Assessment for Pesticides” (AMRAP) where a risk assessment scheme for aquatic macrophytes was proposed. Four working groups evolved from this workshop and were charged with the task of developing Tier 1 and higher-tier aquatic macrophyte risk assessment procedures. Subsequently, a SETAC Advisory Group, the Macrophyte Ecotoxicology Group (AMEG) was formed as an umbrella organization for various macrophyte working groups. The purpose of AMEG is to provide scientifically based guidance in all aspects of aquatic macrophyte testing in the laboratory and field, including prospective as well as retrospective risk assessments for chemicals. As AMEG expands, it will begin to address new topics including bioremediation and sustainable management of aquatic macrophytes in the context of ecosystem services.     

Occurrence of sulfonamide residues along the Ebro River basin: removal in wastewater treatment plants and environmental impact assessment

Sulfonamides (SAs) have become one of the antibiotic families most frequently found in all kind of environmental waters. In the present work, the presence of 16 SAs and one of their acetylated metabolites in different water matrices of the Ebro River basin has been evaluated during two different sampling campaigns carried out in 2007 and 2008. Influent and effluent samples from seven wastewater treatment plants (WWTPs), together with a total of 28 river water samples were analyzed by on-line solid phase extraction-liquid chromathography-tandem mass spectrometry (on-line SPE-LC-MS/MS). Sulfamethoxazole and sulfapyridine were the SAs most frequently detected in WWTPs (96-100%), showing also the highest concentrations, ranging from 27.2 ng L(-1) to 596 ng L(-1) for sulfamethoxazole and from 3.7 ng L(-1) to 227 ng L(-1) for sulfapyridine. Sulfamethoxazole was also the SA most frequently detected in surface waters (85% of the samples) at concentrations between 11 ng L(-1) and 112 ng L(-1). In order to assess the effectiveness of the wastewater treatment in degrading SAs, removal efficiencies in the seven WWTPs were calculated for each individual SA (ranging from 4% to 100%) and correlated to the corresponding hydraulic retention times or residence times of the SAs in the plants. SAs half-lives were also estimated, ranging from to 2.5 hours (sulfadimethoxine) to 128 h (sulfamethazine). The contribution of the WWTPs to the presence of SAs depends on both the load of SAs discharging on the surface water from the WWTP effluent but also on the flow of the receiving waters in the discharge sites and the dilution exerted; WWTP4 exerts the highest pressure on the receiving water course. Finally, the potential environmental risk posed by SAs was evaluated calculating the hazard quotients (HQ) to different non-target organisms in effluent and river water. The degree of susceptibility resulted in algae>daphnia>fish. Sulfamethoxazole was the only SA posing a risk to algae in effluent water, with an HQ>7.     

The quest for eco-social efficiency in biofuels production in Brazil

Equating eco-efficiency with the business link to sustainable development is clearly limited, especially with the new paradigms brought up by Corporate Social Responsibility, which has shown that the private sector’s contribution to sustainable development can go far beyond the sphere of pollution control. It is necessary to give eco-efficiency a broader meaning so that it can support the quest for sustainable development. This requires the inclusion of social aspects, leading to a kind of eco-social efficiency. The present paper illustrates this idea by comparing Brazilian production and use of ethanol from sugarcane, in the context of the National Alcohol Program (Proalcool), with biodiesel production and use, in the context of the Biodiesel National Program (PNPB). Despite the problems presented, PNPB was designed to encourage companies to align productivity concerns with social ones, what could be the beginning of the here called eco-social efficiency.     

Spatial interrelations between bank voles and yellow-necked mice in Crabapple Island

The investigations on spatial co-occurrence between Myodes (Clethrionomys) glareolus and Apodemus flavicollis conducted on Crabapple Island (NE Poland) in 1994 through 1999 reveal that: single mature females of both species often occur in the same places, whereas local groups of such females rarely cohabit the same place. Mature males of these species always avoid sites occupied by males of the other species. Immature males, however, seem to be mutually indifferent.