Sequential extractions of selenium soils from Stewart Lake: total selenium and speciation measurements with ICP-MS detection

Different techniques have been employed in order to evaluate the most efficient procedure for the extraction of selenium from soil as required for speciation. Selenium contaminated sediments from Stewart Lake Wetland, California were used. A strong acid mineralization of the samples gives quantitative total selenium, which is then used to estimate recoveries for the milder extraction methods. The different extraction methodologies involve the sequential use of water, buffer (phosphate, pH 7) and either acid solution (e.g. HNO3 or HCl) or basic solutions (e.g. ammonium acetate, NaOH or TMAH). Pyrophosphate extraction was also evaluated and showed that selenium was not associated with humic acids. The extractants were subsequently analyzed by size exclusion chromatography (SEC) with UV (254 and 400 nm) and on-line ICP-MS detection; anion exchange chromatography, and ion-pair reversed phase chromatography with ICP-MS detection. For sequential extractions the extraction efficiencies showed that the basic extractions were more efficient than the acidic. The difference between the acidic and the basic extraction efficiency is carried to the sulfite extraction, suggesting that whatever is not extracted by the acid is subsequently extracted by the sulfite. The species identified with the different chromatographies were selenate, selenite, elemental selenium and some organic selenium.     

Partitioning of mercury onto suspended sediments in estuaries

Radiochemical partitioning experiments using 203Hg have been undertaken with mixtures of river, seawater and sediment samples taken from three geochemically contrasting UK estuaries: the Plym, Beaulieu and Mersey. Species of dissolved Hg were determined using reversed-phase C18 chelating columns and particulate species were determined by sequential leaching with 1 M NH4OAc and 1 M HCl. Mercury had a high particle reactivity with partition coefficients, KDs, ranging from 10(4) to 5 x 10(5) ml g(-1), depending on salinity, the chemical composition of the end-member waters, and on the physico-chemical characteristics of the sediment. Dissolved organic matter present in the waters (humic substances and/or anthropogenic compounds) was found to be the main factor governing the forms of dissolved Hg and their reactivity. From the spiked 203Hg, up to 95% of the dissolved metal was retained on the C18 columns for the Mersey waters, whereas this fraction was < 60% in the Plym and Beaulieu waters. Quasi-irreversible adsorption of Hg onto particles from each estuary was observed over a time-scale of a few hours and < 20% of total particulate Hg was released by the sequential leach. In this paper, physico-chemical processes are proposed to explain the estuarine behaviour of Hg and the results are discussed in terms of Hg availability in estuarine systems.     

A study of the elemental leachability and retention capability of compost

In this work a comparison is made between the different approaches that can be taken to evaluate the mobility of elements in compost. The practical consequences of the results obtained are also discussed in terms of methods for cleaning up compost and using compost in environmental remediation. The mobility of potentially toxic elements in compost is evaluated by leaching with four selected eluents, i.e. diluted sulfuric acid, oxalate, citrate and EDTA. In contrast to the chelating agents, diluted sulfuric acid was found to generally have a low leaching capability for removal of heavy metals from compost. This implies that the risk of heavy metal leaching caused by natural rainfall is likely to be low. The results obtained in the leaching experiment were compared with previous results obtained from sequential fractionation. This comparison confirmed that both methods gave similar results for predicting the lability of elements in compost. A non-linear regression analysis of the leaching curves was also conducted. The leaching curves for elements with high lability could be fitted with a two components model. The labile components identified by the kinetic model are approximately in accordance with the fractions obtained from the first step of the sequential extraction method. The kinetic speciation method is shown to be a relatively rapid and simple procedure for compost which gives more information about element lability than simple leaching experiments. The leaching reagents used in this work were not effective enough to be used for cleaning up compost with a high metal content. Compost was however shown to have a high affinity for heavy metals, with the order of affinity of metal for the compost being very similar to that seen for humic acid. Compost may therefore prove to be a good remediation material for metal contaminated waste.     

Association between the mollusc bivalve Loripes lucinalis and a Chlamydia-like organism,with comments on its pathogenic impact,life cycle and possible mode of transmission

Loripes lucinalis is a littoral bivalve which has already been confirmed to harbour endo-cellular sulfur-oxidizing bacteria within its gills. Examination of the digestive gland of L. lucinalis collected from the Moulin Blanc Beach in the Bay of Brest (Brittany, France) revealed the existence of an additional association involving a Chlamydia-like organism. Three different forms of Chlamydia-like bacteria were observed: reticulate rod-shaped cells, electron-dense cells and enlarged cells. The reticulate rod-shaped cells and the electron-dense bodies are thought to represent the germinal initial body and infectious form of the bacteria, respectively. The enlarged cells were always associated with what are believed to be spherical or icosahedral phages. Initial infestation seems to occur by phagocytosis at the apical pole of the digestive cells of the tubule and duct epithelia. Within the host cell, the bacteria undergo binary fission and budding, forming an inclusion which gradually fills up the cell. Inclusions are generally between 15 and 30 m in size, and > 85% of all individuals examined possessed inclusion bodies. The level of infestation varied between individuals, some being heavily colonized, but did not seem to be related to season. Histological and ultrastructural observations suggest that, once developed, the colony has three possible fates: (1) the cells will degenerate due to phage infection; (2) colony overcrowding will occur, causing the development of electron-dense bodies that will be released into the lumen; (3) the entire membrane-bound inclusion will be released into the lumen and subsequently into the pallial cavity. Inclusions within the pallial cavity may be ingested by the host or may even be phagocytized by bacteriocyte cells of the gill. It is proposed that this association could be a form of symbiosis and that L. lucinalis may, therefore, be a rare example of an organism adapted to harbour two very different symbioses.     

福建省森林固定CO2价值评估

借鉴国内外研究成果,引入“市场逼近系数”,构造森林固定CO2效益经济结构模型,评估福建省森林固定CO2价值,为福建省森林资源的科学管理和资产评估提供了借鉴和参考。     

天津地区大气污染状况和气溶胶硫酸盐的研究

我们于1980—1981年对天津市大气污染物浓度做了同步监测,对天津市大气污染状况,二氧化硫转化为硫酸盐的过程及其对大气能见度的影响做了研究。以超C_i几率和的方法处理数据,研究结果表明,大气污染以早晨最严重,傍晚次之,中午较轻:冬季比夏季污染严重。各种污染物中以硫酸盐对大气能见度的影响最大,总颗粒物次之。当大气相对湿度大于70%时,对大气能见度的影响比较突出。颗粒物中的苯溶物对大气能见度有一定的影响。城市中相对湿度高时硫酸盐浓度大,可能是产生冬季烟雾事件的原因。下风方向的硫酸根浓度与二氧化硫浓度的比值和硫酸根含硫浓度与大气总硫浓度的比值均比上风方向相应的数值高,说明城市燃煤烟气是硫酸盐的来源。城市中硫酸根浓度与二氧化硫浓度的相关系数为0.77,硫酸根与颗粒物浓度的相关系数为0.95。在形成硫酸根的过程中二氧化硫浓度和颗粒物可能有贡献。以一维有源简化模式估算二氧化硫转化为硫酸根的速率常数,约为2.3±1.1%/hr,冬季约1.5%/hr。二氧化硫的迁移距离约为17—340km。     

电厂脱硫产物的处置和综合利用

本文通过对电厂脱硫产物成份的分析,并类比国外技术论述其贮存处置方法,脱硫产物综合利用的用途及合理性.     

模拟在役井注减氧空气对1Cr-L80井筒管材防腐研究

目的在充分调研陆上及渤海周边相似油气田注气开发井筒腐蚀情况的基础上,明确注减氧空气开发井对井筒全寿命周期管材腐蚀速率大小。方法系统性开展注气井不同含氧量条件下的动态腐蚀实验研究,并对生产井动态腐蚀进行评价,深入分析减氧空气对油井管腐蚀行为,分类分层次分析归纳注减氧空气工况管柱腐蚀特性、腐蚀速率影响因素以及管柱腐蚀风险。结果得出在注气井井口、井中、井底工况,不同氧气浓度下,1Cr-L80管材在注气井井口、井中、井底的腐蚀关系曲线。在含氧量为5%(质量分数)的注气井井口、井中、井底,1Cr-L80的腐蚀速度分别为0.345、0.2147、0.1158mm/a;在含氧量为21%的注气井井口、井中、井底,1Cr-L80的腐蚀速率分别为0.7399、1.2854、2.4506 mm/a。结论1Cr-L80材质腐蚀速率均保持在较高水平,老井直接注入空气会存在高腐蚀风险。     

中国“达标排放”政策的实证分析及理论探讨

以固定点源烟尘排放为例,从排放标准和监测标准两方面讨论了中国现阶段“达标排放”的状况,指出当前的大气污染源达标排放实际上是“初步达标排放”,现在的排放标准和监测规范合适考核污染源的初步达标排放,不适合考核污染源的连续达标排放。排放标准的规定形式、监测规范和适用范围需要改革。现在的排放标准指标需要与监测规范和超标率限值结合起来,以促进污染源的连续达标排放。     

室内空气品质评价方法研究进展

介绍了室内空气品质评价的定义、评价的标准和几种现行的评价方法.通过对这几种方法进行系统地介绍,比较这些方法在室内空气品质评价时的优劣,对其中的几种方法提出了改进意见,为进一步研究室内空气评价方法指明了方向.