Biotransformation of p-toluic acid in anoxic estuarine sediments under a CO2 or N2/H2 atmosphere.

The composition of the headspace gas affected the growth dynamics of microbial populations and the biotransformation pattern of p-toluic acid in anoxic estuarine sediments. Under CO2 atmosphere, p-toluic acid was transformed by the sediment microorganisms without a lag period, while under N2/H2 atmosphere, p-toluic acid was transformed after a lag period of 55 days. Under the N2/H2 atmosphere, the methanogen population, following a rapid increase of almost two orders of magnitude, remained at a high level until just before the onset of biotransformation. We hypothesize that during the lag period, the hydrogenotrophic methanogens were removing the H2, a step which is essential before the reaction can be exergonic. Acetogenic bacteria did not initiate decarboxylation as the first step of biotransformation under either atmosphere. Neither the methanogens nor the acetogenic bacteria appeared to be directly involved in the biotransformation of p-toluic acid under either atmosphere. Under the CO2 atmosphere, biotransformation of p-toluic acid involved sulfate-reducing bacteria, while under N2/H2, both sulfate-reducing bacteria and other eubacteria were involved.     

Application of a multi-step computation scheme to an intratidal estuarine water quality model

A computation scheme, which involves multi-step computation of the decoupled mass-balance equations in water quality models, was proposed by Park and Kuo (1996. Water Res. 30, 2255–2264). Using a simple hypothetical model, they explained the concept and demonstrated the accuracy and computational efficiency of the multi-step scheme. This paper describes the concept and the implementation of the multi-step computation scheme in a more generalized format for both intratidal and intertidal estuarine water quality models. The scheme is applied to a prototype estuary using a laterally-integrated two-dimensional intratidal model. The computational efficiency of the scheme is demonstrated by comparing the model results using the multi-step scheme with those using the traditional single-step explicit numerical solution of the kinetic processes.     

Determination of levoglucosan and its isomers in size fractions of aerosol standard reference materials

The present study tested the extraction efficiency and quantification reproducibility of anhydrosugars in a series of NIST SRMs using two extraction protocols and isotopically-labeled (d₇-levoglucosan) vs. chemically analogous (sedoheptulosan) surrogates. In both instances, levoglucosan concentrations in the different versions of the Washington, D.C. urban dust standard (SRM 1649, 1649a, 1649b, and RM 8785) were similar. The present test also showed that levoglucosan concentrations were not affected by long-term shelf storage of dry material. Variability of analyses were similar for both surrogates and averaged <5%. Surrogate recoveries were shown to average 103 ± 7% and 97 ± 7% for d₇-levoglucosan and sedoheptulosan, respectively. The choice of solvent was shown to affect recoveries the most (but not variability). Levoglucosan concentrations were either seriously underestimated or overestimated with ethyl acetate extraction when d₇-levoglucosan or sedoheptulosan was used as surrogate, respectively. These results point to the need to use some fraction of polar solvent (i.e. methanol) in the solvent mixture. Anhydrosugar concentrations in the urban dust from the Czech Republic (candidate SRMs 2786 and 2787) were characterized by 3- to 7-fold higher anhydrosugar concentrations than those observed in the Washington, D.C. urban dust. The internal anhydrosugar signatures (i.e. levoglucosan/mannosan ratio: L/M) confirm the predominance of biomass combustion sources in both SRM series with mixed inputs from hardwood and softwood combustion in the Washington, D.C. urban dust and a predominantly softwood source in the Prague urban dust. The uniform distribution of anhydrosugars, across the particle size distribution of both SRM series, confirms earlier studies that low temperature charred materials contribute significant inputs to atmospheric ultrafine particles with long atmospheric residence time and transport ranges.     

An investigation on the potential of metal recovery from the municipal waste incinerator in Taiwan

This study aimed to identify distribution of metals and to estimate the amount of these metals that can be potentially recovered from incineration residues. First, the partitioning behavior of Cr, Cu, Fe, Cd, Al, Zn, and Pb in bottom ash and fly ash was investigated in one large municipal waste incinerator in Taiwan. In addition, the material flow analysis (MFA) method was used to estimate the material flux of metals within incinerator plant, and to calculate the amount of metal recovery. According to the findings of this study, six metals (Fe, Al, Cu, Zn, Cr, and Pb) concentrated in bottom ash mostly, while Cd existed primarily in fly ash. The weight percentages of Fe (4.49%), Al (5.24%), Cu (1.29%), Zn (2.21%), and Pb (0.58%) in incinerator ash are high, and even higher than the compositions of natural minerals. Finally, the amount of Cr, Cu, Fe, Cd, Al, Zn and Pb that can be potentially recovered from incineration residues will reach 2.69 x 10(2), 1.46 x 10(4), 4.91 x 10(4), 6.92 x 10(1), 5.10 x 10(4), 1.85 x 10(4) and 4.66 x 10(3) ton/yr, respectively.     

Encapsulation behaviors of metals in slags containing various amorphous volume fractions

In this study, a melting process with addition of SiO2 was applied to treat incinerator fly ash. To describe the encapsulation behaviors of metals quantitatively, the amorphous volume fraction (AVF) of slags was initially determined. Vitrification appeared to reduce the mobility of Cr, Cu, Mn, and Ni instead of significantly immobilizing Cd, Pb, and Zn. It was verified that SiO2 enhanced the formation of an amorphous glassy structure. With the increase of SiO2, the crystalline phases would gradually diminish and transform into a higher silica-connected species. During the formation of slag matrix, Al, Ca, and Mg could modify the glass network, and consequently the encapsulation behaviors of these species would noticeably affect the chemical stability of slags. Significant immobilization of crust metals could be achieved only when a more compact and interconnected amorphous glass network was formed. Hence, it indicated that a higher AVF silica-based slag had a better potential to resist acid attack. In conclusion, for environmental protection, it is important to investigate the correlation between the encapsulation behaviors of metals and the crystalline characteristics of slag structure.     

Emergency response plan for boiler explosion with toxic chemical releases at Nan-Kung industrial park in central Taiwan

A large amount of hazardous materials and equipment has been extensively employed to produce useful chemicals for our daily lives, but many serious accidents, such as fires, explosions, toxic releases, and so on, that harm human beings and impact the environment have occurred during preparation, operation, and transportation of these chemicals. On 17 May 2007, a toxic release from a boiler explosion in a chemical firm triggered a large amount of xylene (7 ton), isopropanol (8 ton), phosphorus trichloride (44.7 ton), and dimethyl formamide (DMF) (1.37 ton) to be released to the atmosphere with total damages of 2000 m² level ground. Through concerted efforts from the Yunlin Emergency Response Information Center (YERIC), sponsored by the Environmental Protection Administration (EPA) of Taiwan and other government sectors, this accident was eventually well controlled after 37 h with 107 people being involved in the rescue action. This study could be applied to lessen the degree of hazard for relevant accidents with an emergency response plan (ERP), and, via Fourier transform infrared (FTIR) spectroscopy and photo ionization detector (PID) the toxic concentrations of airborne chemicals that occurred in the industrial area could be analyzed.     

工业锅炉烟管氯离子腐蚀原因分析

某DZL(SG)-1.25-M、Q-Ⅱ型工业锅炉的烟管水侧出现大量腐蚀凹坑,腐蚀烟管更换后不足一个月,烟管再次出现明显的腐蚀倾向.试验分析表明:水处理交换树脂清洗不彻底引起给水氯离子偏高,排污不足导致锅水中的氯离子和溶解固形物进一步浓缩,溶解固形物高于标准GB/T 1576-2018要求,受热烟管水侧外壁最终在锅水高浓度氯离子作用下发生了电化学腐蚀.     

Biogas production from anaerobic digestion of food waste and relevant air quality implications

Biopower can diversify energy supply and improve energy resiliency. Increases in biopower production from sustainable biomass can provide many economic and environmental benefits. For example, increasing biogas production through anaerobic digestion of food waste would increase the use of renewable fuels throughout California and add to its renewables portfolio. Although a biopower project will produce renewable energy, the process of producing bioenergy should harmonize with the goal of protecting public health. Meeting air emission requirements is paramount to the successful implementation of any biopower project. A case study was conducted by collecting field data from a wastewater treatment plant that employs anaerobic codigestion of fats, oils, and grease (FOG), food waste, and wastewater sludge, and also uses an internal combustion (IC) engine to generate biopower using the biogas. This research project generated scientific information on (a) quality and quantity of biogas from anaerobic codigestion of food waste and municipal wastewater sludge, (b) levels of contaminants in raw biogas that may affect beneficial uses of the biogas, (c) removal of the contaminants by the biogas conditioning systems, (d) emissions of NO_x, SO₂, CO, CO₂, and methane, and (e) types and levels of air toxics present in the exhausts of the IC engine fueled by the biogas. The information is valuable to those who consider similar operations (i.e., co-digestion of food waste with municipal wastewater sludge and power generation using the produced biogas) and to support rulemaking decisions with regards to air quality issues for such applications.

Implications: Full-scale operation of anaerobic codigestion of food waste with municipal sludge is viable, but it is still new. There is a lack of readily available scientific information on the quality of raw biogas, as well as on potential emissions from power generation using this biogas. This research developed scientific information with regard to quality and quantity of biogas from anaerobic co-digestion of food waste and municipal wastewater sludge, as well as impacts on air quality from biopower generation using this biogas. The need and performance of conditioning/pretreatment systems for biopower generation were also assessed.     

Aerosol characteristics of different types of episode

Daily and hourly average data from nine air-quality monitoring stations distributed across central Taiwan, which include ten items (i.e., PM₁₀, PM_2.5, wind direction, wind speed, temperature, relative humidity, SO₂, NO₂, NO, and CO), were collected from 2005 to 2009. Four episode types: long-range transport with dust storms (DS), long-range transport with frontal pollution (FP), river dust (RD), and stagnant weather (SW), and one mixed type of episode were identified. Of these four episode types, the SW was the dominant type, averaging about 70 %. The mean ratio of PM_2.5/PM₁₀ was the lowest during the RD episodes (0.42), while the mean ratio of PM_2.5/PM₁₀ was the highest during the SW episodes (0.64). Fine aerosol (PM_2.5) and coarse aerosol (PM_10–2.5) samples were collected by high-volume samplers for chemical composition analysis, from only three stations (Douliou, Lunbei, and Siansi) during the days of SW, RD, DS, and FP. The concentrations of PM_2.5 and three ionic species (NH₄ ⁺, NO₃ ^?, and SO₄ ^2?) all showed significant differences among the four episode types. The highest levels of NO₃ ^? (12.1 μg/m³) and SO₄ ^2? (20.5 μg/m³) were found during the SW and FP episodes, respectively. A comparison on the spatial similarity of aerosol compositions among the episodes and/or non-episodes (control) was characterized by the coefficient of divergence (CD). The results showed higher CD values in PM_10–2.5 than in PM_2.5, and the CD values between RD episodes and the other three episodes were higher than those between two types of episode for the other three episodes. The ratios of SOR (sulfur oxidation ratio), SO₄ ^2?/EC (elemental carbon), NOR (nitrogen oxidation ratio), and NO₃ ^?/EC showed that sulfate formation was most rapid during the FP, while nitrate formation was most rapid during the SW.     

Measurement of Particulate Bound Mercury,Gaseous Elemental Mercury,and Reactive Gaseous Mercury Concentrations by Using an Ambient Air Mercury Collection System

In this investigation, the concentrations of gaseous elemental mercury (GEM), reactive gaseous mercury (RGM) and particulate bound mercury (PBM) in ambient air were measured at the Hung Kuang (traffic) sampling site during September 27 to October 6, 2014. An ambient air mercury collection system (AAMCS) was utilized to measure simultaneously PBM, GEM, and RGM concentrations in ambient air. The results thus obtained demonstrate that the mean concentrations of PBM, GEM, and RGM were 38.57 ± 11.4 (pg/m³), 17.67 ± 5.56 (ng/m³) and 10.78 ± 2.8 (pg/m³), respectively, at this traffic-sampling site. The mean GEM/PBM and GEM/RGM concentration ratios were 458 and 1639, respectively. The results obtained herein demonstrate that AAMCS can be utilized to collect three phases of mercury simultaneously. The mean PBM, GEM, and RGM concentrations herein were compared with others found in Asia, America, Europe and Antarctica. The mean PBM, GEM, and RGM concentrations were found to be lowest in Asia and Antarctica. The mean PBM concentration in Europe was approximately eight times that in this investigation. The mean GEM and RGM concentrations in this study were 1.21 and 170 times those found in the United States.