Facile synthesis of graphitic carbon-nitride supported antimony-doped tin oxide nanocomposite and its application for the adsorption of volatile organic compounds

Antimony-doped tin oxide(ATO) nanoparticles with an average size of ～ 6 nm were prepared by co-precipitation and subsequent heat treatment. Graphitic carbon nitride(g-CN)/ATO hybrid nanocomposite was designed by the combination of thermally synthesized g-CN and ATO nanoparticles by ultrasonication. The materials were characterized using N2 adsorption/desorption(BET), X-ray diffraction(XRD), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and Fourier transform infrared spectroscopy(FTIR). A mixture of five volatile organic compounds(VOCs, chloroform, benzene, toluene, xylene and styrene) was used to compare the adsorption capacity of the samples. The adsorption capacity of ATO nanoparticles was improved by the addition of g-CN. Experimental data showed that, among the five VOCs,chloroform was the least adsorbed, regardless of the samples. The g-CN/ATO showed nearly three times greater adsorption capacity for the VOC mixture than pure ATO. The unchanged efficiency of VOC adsorption during cyclic use demonstrated the completely reversible adsorption and desorption behavior of the nanocomposite at room conditions. This economically and environmentally friendly material can be a practical solution for outdoor and indoor VOC removal.     

Physicochemical characteristics of paper industry effluents��a case study of South India Paper Mill (SIPM)

Pulp and paper mills generate varieties of pollutants depending upon type of the pulping process being used. This paper presents the characteristics of wastewater from South India Paper Mill, Karnataka, India which is using recycled waste paper as a raw material. The raw wastewater consists of 80?C90 mg L^???1 suspended solid and 1,010?C1,015 mg L^???1 dissolved solid. However, pH varied from 5.5?C6.8. The biochemical oxygen demand and chemical oxygen demand ranged from 200?C210 and 1,120?C1,160 mg L^???1, respectively. Aerobic treatment of raw effluent attribute to significant reduction in suspended solid (range between 25 to 30 mg L^???1) and total dissolved solid (range between 360 to 390 mg L^???1). However, pH, temperature, and electrical conductivity were found superior after treatment. Copper, cadmium, iron, lead, nickel, and zinc were found in less quantity in raw effluent and were almost completely removed after treatment. The dendrogram of the effluent quality parameters clearly indicate that South India Paper Mill does not meet Minimal National Standard set by central Pollution Control Board to discharge in agricultural field.     

Biocatalytic polymeric membranes to decrease biofilm fouling and remove organic contaminants in wastewater: a review

The presence of recalcitrant contaminants in wastewater is major challenge to decrease pollution and associated health issues. As a consequence, membrane technologies have recently attracted industrial attention, yet a major setback of membrane employment is membrane fouling which leads to frequent discarding of membrane modules. More than 45% of all membrane fouling cases are caused by biofilms that are resistant to antimicrobial agents. Here we review polymeric membranes with antifouling properties, with focus on surface properties, fabrication, characterization, biocatalysis using enzymes and application towards the removal of dyes, phenol, pesticides and fertilizers. Nano-engineered fabrication of polymeric membranes allow to decrease fouling by 80–90%. Immobilized oxidoreductases in polymeric membranes allow 65–98% removal contaminants in wastewater.

     

Assessment of coastal dune characteristics using georadar imaging and sedimentological analysis: Odisha and Visakhapatnam, India

The East coast of India is subject to continuous changes by high energy events. We sought to assess the depositional conditions along the coast from the geophysical and sedimentological character of the dune sands of the Gopalpur and Paradeep coast of Odisha, and the Sagarnagar coast of North Visakhapatnam. Quartz layers of the heavy mineral-rich zone collected at a depth of ~2 m from the landward foot of the dunes in the Visakhapatnam and Odisha coast, gave the OSL age estimates as 1,050?±?50 and 260?±?10 years respectively, revealing that the age of the dunes in Visakhapatnam are older than those on the Odisha coast. Episodic high energy events have affected the coast. Evidence from ground penetrating radar data consists of three stratigraphic units. The upper unit consists of vague reflections, parallel to the ground in continuous manner, most probably formed by wind action. On the other hand, the middle layer shows high amplitude reflections of heavy mineral-rich massive layers, possibly the result of tsunami activity. The lower massive layer parallel to the ground surface shows a low reflection pattern. The GPR studies showed that the thickness of the heavy mineral layers is greater on the landward foot of the dune as compared to that on the seaward side. According to the grain size analysis, the dune is composed of both wind generated and tsunamigenic sediments. The scanning electron microscope studies revealed that the heavy minerals present in the dunes are mainly sillimanite, ilmenite, garnet, pyroxene, rutile, sphene, biotite, hornblende, zircon, monazite and magnetite. The study demonstrates the origin of sand dunes in different ages along the East Coast of India by the effect of various natural phenomena.     

Evaluation of Extracted Chitosan from Portunus Pelagicus for the Preparation of Chitosan Alginate Blend Scaffolds

In recent years there is a growing need in generating a biocompatible and cost effective porous scaffold for tissue engineering purposes. Therefore, this study focused on conversion of the shell waste of locally available crab variety P.pelagicus (Blue swimming crab) into the chitosan scaffold. As the poor mechanical strength of chitosan limits its usage in tissue engineering, it was blended with alginate. The scaffolds were prepared by the freeze gelation method which requires less time and minimum energy, with fewer residual solvent and easier to scale up. To the best of our knowledge there are no reports on scaffold preparation from the extracted chitosan, blended with alginate by freeze gelation method. The biological properties of chitosan-alginate scaffolds (Cts–Alg) were evaluated and compared with those of chitosan scaffolds. The prepared scaffolds were characterized by SEM, swelling property, in vitro enzymatic degradation, and hemo, biocompatibility properties. Chitosan-alginate scaffolds had an average pore size of 40 μm and tensile strength of 0.564 ± 0.0.018 % MPa. Its swelling ratio was 27.5 ± 0.28 %, with mass loss percentage of 10 ± 0.33 % after 4 weeks of degradation. It has exhibited good hemocompatible properties too. Mouse fibroblast 3T3 cells were able to adhere and proliferate well in the blended scaffold. All these results indicated that chitosan-alginate scaffold is a suitable alternative substitute for tissue engineering.     

Dissipation kinetics of spiromesifen on tea (Camellia sinensis) under tropical conditions

Spiromesifen (Oberon) is a new insecticide and miticide of chemical class ketoenol active against white flies (Bemisia spp., Trialeuroides spp.) and spider mites (Tetranychus and Panonychus spp.). Due to its potential significance in insect resistance management, it is important to establish its behaviour on crop and environment. In the present study, the degradation/dissipation of spiromesifen on tea crop under tropical environmental conditions was studied and its DT(50) (t(1/2)), and DT(90) (time to reduce to 90% of the initial value) were estimated. Spiromesifen was sprayed on tea crop after first rain flush at four different locations @ 96 and 192ga.i.ha(-1). Samples of tea leaves were drawn at 0, 1, 3, 5, 7, 10, 15, 21 and 30 days after treatment and that of soil at 10 days after treatment and at harvest from 0 to 15 and 15 to 30cm layers. After crude extraction of tea leaves for spiromesifen residues with acetone:water, the contents were partitioned with cyclohexane:ethyl acetate and cleaned up on Florosil column. Soil residues were also extracted similarly. Quantification of residues was done on GC-MS in Selected Ion Monitoring (SIM) mode in mass range 271-274m/z. The LOQ of this method was found to be 0.05microgg(-1) while LOD being 0.015microgg(-1). The DT(50) of spiromesifen when applied at recommended doses in tea leaves was found to be 5.0-8.5 days. Ninety-nine percent degradation was found to occur within 33-57 days after application. In soil, no residues of spiromesifen were detectable 10 days after treatment.     

Assessment of genotoxic effects of lead in occupationally exposed workers

The genotoxicological effects in 200 lead acid storage battery recycling and manufacturing industry workers in Hyderabad along with matched 200 controls were studied. The genetic damage was determined by comet, micronucleus (MN), and chromosomal aberration (CA) test in peripheral blood lymphocytes (PBL). The MN test was also carried out in buccal epithelial cells (BECs). Pb in ambient air, blood Pb (B-Pb) concentrations, and hematological parameters were measured. The superoxide dismutase (SOD), catalase (CAT), glutathione (GSH), glutathione peroxidase (GPx), and malondialdehyde (MDA) formed were also studied. The results of the present study showed that there was a statistically significant (P?P?GPx, and CAT levels were significantly decreased while GSH and MDA levels increased in exposed group when compared to control group. The present study suggests that environmental health standards should be enforced to control Pb contamination from battery industries to reduce human health risk.     

Assessment of prenatal mercury exposure in a predominately Caribbean immigrant community in Brooklyn, NY

Prenatal mercury exposure and its fetotoxic effects may be of particular concern in urban immigrant communities as a result of possible contributing cultural factors. The most common source of exposure in these communities is ingestion of fish and shellfish contaminated with methylmercury. Other sources of exposure may occur in ritualistic practices associated with Hispanic and Caribbean-based religions. This study 1) assessed total mercury levels in both random urine specimens from pregnant women, and in cord blood; and 2) examined environmental sources of exposure from a convenience sample in a predominantly Caribbean immigrant population in Brooklyn, New York. A questionnaire designed in collaboration with health professionals from the Caribbean community assessed the frequency of fish consumption, ritualistic practices, occupational exposures, and use of dental amalgams and mercury-containing skin and household products. The geometric mean for total mercury in cord blood was 2.14 μg L(-1) (95%CI: 1.76-2.60) (n = 78), and 0.45 μg L(-1) (95%CI: 0.37-0.55) (n = 183) in maternal urine corrected for creatinine (μg g(-1)). Sixteen percent of cord blood mercury levels exceeded the estimated equivalent of U.S. Environmental Protection Agency's Reference Dose (5.8 μg L(-1) blood). Predictors of cord blood mercury included maternal fish consumption and foreign birth of the mother. Predictors of urine mercury included foreign birth of the mother, number of dental amalgams, and special product use. There were no reports of mercury use in ritualistic practices or in cosmetics; however some women reported use of religious medals and charms. This study characterized risk factors for mercury exposure in a sample of urban, predominantly Caribbean-born blacks. Findings may help target interventions in this population, which might include appropriate fish selection and consumption frequency during pregnancy, and safe handling of mercury-containing products in the home.     

Photocatalytic degradation of the herbicide pendimethalin using nanoparticles of BaTiO3/TiO2 prepared by gel to crystalline conversion method: A kinetic approach

Photocatalytic degradation of the herbicide, pendimethalin (PM) was investigated with BaTiO₃/TiO₂ UV light system in the presence of peroxide and persulphate species in aqueous medium. The nanoparticles of BaTiO₃ and TiO₂ were obtained by gel to crystallite conversion method. These photo catalysts are characterized by energy dispersive x-ray analysis (EDX), scanning electron microscope (SEM), x-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) adsorption isotherm and reflectance spectral studies. The quantum yields for TiO₂ and BaTiO₃ for the degradation reactions are 3.166 Einstein m^?2 s^?1 and 2.729 Einstein m^?2 s^?1 and catalytic efficiencies are 6.0444 × 10^?7 mg^?2h^?1L² and 5.403 × 10^?7 mg^?2h^?1L², respectively as calculated from experimental results. BaTiO₃ exhibited comparable photocatalytic efficiency in the degradation of pendimethalin as the most widely used TiO₂ photocatalyst. The persulphate played an important role in enhancing the rate of degradation of pendimethalin when compared to hydrogen peroxide. The degradation process of pendimethalin followed the first-order kinetics and it is in agreement with Langmuir-Hinshelwood model of surface mechanism. The reason for high stability of pendimethalin for UV-degradation even in the presence of catalyst and oxidizing agents were explored. The higher rate of degradation was observed in alkaline medium at pH 11. The degradation process was monitored by spectroscopic techniques such as ultra violet-visible (UV-Vis), infrared (IR) and gas chromatography mass spectroscopy (GC-MS). The major intermediate products identified were: N-propyl-2-nitro-6-amino-3, 4-xylidine, (2, 3-dimethyl-5-nitro-6-hydroxy amine) phenol and N-Propyl-3, 4-dimethyl-2, 6-dinitroaniline by GC-MS analysis and the probable reaction mechanism has been proposed based on these products.     

Measurement of personal and integrated exposure to particulate matter and co-pollutant gases

Personal exposure measurement can serve as an effective tool to understand the effect of exposure to air pollutants. Alternatively, exposure assessment using pollutant concentrations in different microenvironments and accurate time–activity information for the subjects can provide good information regarding human integrated exposure. A panel of 18 healthy students of Indian Institute of Technology (IIT) Kanpur in the age group of 18 to 30 years participated in the personal exposure measurements for particulate matter, CO, NO₂ and VOC during post-monsoon and pre-monsoon seasons. Overall, 432 h person exposure data was collected in this study. The major sources of particulate and gaseous co-pollutants were identified. These directly obtained personal exposure values were then compared to the indirectly estimated integrated exposure values. Personal and integrated exposures gave statistically similar results. Through this study, we have shown that integrated exposure values could closely estimate the personal exposure values for particulate matter that can significantly reduce time and cost involved in personal exposure studies. The lung parameters for all the subjects measured during the pre-monsoon and post-monsoon seasons showed statistically significant reduction during pre-monsoon. This was attributed to the high levels of coarse particles during pre-monsoon.